MSRB860-1 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
© Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev. 1
1 Publication Order Number:
MSRB860−1/D MSRB860−1 Product Preview SWITCHMODE™ Soft Recovery Power Rectifier D2PAK−SL Straight Lead Designed for use as free wheeling diodes in variable speed motor control applications and other average frequency switching power supplies. These state−of−the−art devices have the following features:
- Soft Recovery with Guaranteed Low Reverse Recovery Charge (QRR) and Peak Reverse Recovery Current (IRRM)
- 150°C Operating Junction Temperature
- Epoxy meets UL94, VO @ 1/8″
- Low Forward V oltage
- Low Leakage Current
- High Temperature Glass Passivated Junction Mechanical Characteristics:
- Case: Molded Epoxy
- Weight: 1.9 Grams (approximately)
- Finish: All External Surfaces Corrosion Resistant and Terminal Leads Readily Solderable
- Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
- Shipped in 50 Units per Plastic Tube
- Marking: MSRB860 This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. http://onsemi.com SOFT RECOVERY POWER RECTIFIER
8.0 AMPERES, 600 VOLTS
CASE 418C−01, Style 2 D2PAK−SL
MSRB860−1 http://onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current (At Rated VR, TC = 125°C) IO 8.0 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 125°C) IFRM 16 A Non−Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 100 A Storage / Operating Case Temperature Tstg, TC − 65 to 150 °C Operating Junction Temperature TJ − 65 to 150 °C THERMAL CHARACTERISTICS Thermal Resistance — Junction −to−Case Thermal Resistance — Junction −to−Ambient R/C0113JC R/C0113JA 1.6 72.8 °C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (1) (IF = 8.0 A) Typical VF TJ = 25°C TJ = 150°C V 1.7 1.4 1.3 1.1 Maximum Instantaneous Reverse Current (VR = 600 V) Typical IR TJ = 25°C TJ = 150°C /C0109A 2.0 1000 Maximum Reverse Recovery Time (2) (VR = 400 V, IF = 8.0 A, di/dt = 200 A//C0109s) Typical trr TJ = 25°C TJ = 125°C ns 120 190 125 Typical Recovery Softness Factor (VR = 400 V, IF = 8.0 A, di/dt = 200 A//C0109s) s = tb/ta 2.5 3.0 Typical Peak Reverse Recovery Current (VR = 400 V, IF = 8.0 A, di/dt = 200 A//C0109s) IRRM 5.8 8.3 A Typical Reverse Recovery Charge (VR = 400 V, IF = 8.0 A, di/dt = 200 A//C0109s) QRR 350 700 nC (1) Pulse Test: Pulse Width ≤380 μs, Duty Cycle ≤ 2% (2) T RR measured projecting from 25% of IRRM to zero current Switchmode is a trademark of Motorola, Inc.
MSRB860−1 http://onsemi.com PACKAGE DIMENSIONS CASE 418C−01 ISSUE O NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN −T− W G K A C E V J H 123 SEATING PLANE D 3 PL DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.340 0.380 8.64 9.65 B 0.380 0.405 9.65 10.29 C 0.160 0.190 4.06 4.83 D 0.020 0.035 0.51 0.89 E 0.045 0.055 1.14 1.40 G 0.100 BSC 2.54 BSC H 0.080 0.110 2.03 2.79 J 0.018 0.025 0.46 0.64 S 0.276 REF 7.00 REF V 0.045 0.055 1.14 1.40 W 0.423 0.462 10.75 11.75 −B− MBM0.13 (0.005) T SF F 0.039 REF 1.00 REF K 0.280 0.360 7.11 9.14 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 MSRB860−1/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative