MSR2K-V6

MSR2KV6 MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 1/14 http://www.m-system.co.jp/ PC Recorder Series MSRpro SOFTWARE PACKAGE Ver.6 Functions & Features

• Industrial recorder on Windows based PC
• Stores, computes and plots in high speed multichannel input data of variety
• Client-server system
• Total of 2048 analolg-discrete mixed input channels
• 100 msec. high speed storing mode
• Recorded data is exportable to other Windows applications in CSV format
• Daily, monthly, annual report can be created by using report software
• Power demand monitoring is available with power monitor software
• Available as gas demand monitoring
• Batch recording is available with client software MODEL: MSR2K-V6

ORDERING INFORMATION

• Code number: MSR2K-V6

RELATED PRODUCTS

• Remote I/O R3 Series Network Module for Modbus/TCP (Ethernet) (model: R3-NE1) Network Module for Modbus (model: R3-NM1)
• Remote I/O R5 Series Network Module for Modbus/TCP (Ethernet) (model: R5-NE1) Network Module for Modbus (model: R5-NM1)
• Modbus I/O Module (model: R7M, R7E)
• Ethernet Communication Adaptor (model: 72EM-M4 (Firmware version V1.01.03 or higher), 72EM2-M4)
• RS-232-C/RS-485 Converter (model: R2K-1)
• Remote I/O R1M Series, R2M Series, R1MS, RZMS, RZUS Series
• Multi Power Monitor (models: 52U, 53U, L53U, 54U)
• Paperless Recorder (models: 73VR21x (Ver.1 is Not applicable), 73VR3100)
• Ethernet Tower Light (model: IT60RE, IT40SRE, IT50SRE, IT60SRE) PACKAGE INCLUDING... Builder Software, English/Japanese version Server Software, English/Japanese version Client/Analyzer Software, English/Japanese version Report software MSRpro-Report Power monitor software MSReco Power monitor client software MSReco-client MSRpro Data Conversion Tool Users manuals for each software program DATA INPUT INTERFACE Modbus RTU interface: Connects to RS-232-C (COM1 through COM8) via an RS-485/ RS-232-C converter; 38.4 kbps Modbus TCP interface: 100-Mbps LAN interface compatible with Windows

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 2/14 http://www.m-system.co.jp/ SERVER SOFTWARE (MSR2K-S) ■ HARDWARE REQUIREMENTS HARDWARE REQUIREMENTS PC IBM PC/AT or compatible Operating system Windows 7 Professional (32-bit, 64-bit) or Windows 10 Professional (32-bit, 64-bit) (The MSR2K may not operate adequately in certain conditions.) CPU Pentium IV 2.0 GHz or higher Screen area XGA (1024 by 768 pixels) or better resolution Display color 65000 colors (16 bits) Main memory 512 MB minimum; 1 GB minimum recommended Hard disk area 80 GB; Use an internal hard disk. *1 I/O hardware R3-NE1, R3-NM1 *2, R5-NE1, R5-NM1 *2, R7E, R7M *2, R1M-GH2, R1M-J3, R1M-A1 *2, R1M-D1, R1M-P4*2, R1MS-GH3, R2M-2G3, R2M-2H3, RZMS-U9 *2, RZUS-U9 *2, 52U *4, 53U *2, L53U *2 , 54U *2, R7MWTU*2, R7EWTU *2, R9MWTU *2, R9EWTU *2, 73VR21x *3,4 , 73VR3100 *3,4, IT60RE , IT40SRE , IT50SRE , IT60SRE CD drive Windows supported CD drive is used to install the software program. Communication port LAN card by Windows Recorded data may be periodically transferred to external storage media to allow new data stored. *2. 100 msec. storing mode is not selectable. *3. Real-time connection only. *4. Single node per station. High speed mode is not selectable. CAUTION: The software’s performance largely depends upon the PC’s performance including other environmental conditions. Data sampling may be missed when it is not adequate. The missing parts will be /f_i lled with the previously sampled data. NOTE: When the Server and the Client are used on the same PC, the PC must satisfy the Server’s system requirements. ■Builder Software & MSRpro V1. Conversion Tool: Installed and used in the Server PC. ■SOFTWARE FUNCTIONS The Server samples data at I/O devices, calculate and store data in files. Stored data is distributed upon request from Clients. Storing Mode: High speed, Middle speed or Low speed selectable Data format: Binary, CSV

• Sampling Rate (depends upon number of slave devices) High speed mode: 100 msec. Middle speed mode: 1 sec. Low speed mode: 5 sec.
• Maximum number of I/O signals High speed mode: 8 groups (256 points) Middle/low speed mode: 2048 (Limited to 512 when the Server and the Client are in the same PC.)
• Data Storing Method Normal: Recording is manually initiated and stopped. Data is continuously stored while the recording is on. Auto: Recording is automatically initiated and stopped at a predefined time (one time only or every day). Event recording: The Server detects an external event by trigger signal, and stores preset number of samples (max. 120 as pretrigger, max. 1200 as posttrigger) before and after the moment of event. Remote trigger: Data is automatically recorded while the external trigger condition (input) is true. Store conditionally (analog): Data is automatically recorded when a specific analog input signal is within a pre-determined range.
• Storing Rate (reading and plotting) (selectable per group) High speed mode: 100, 500 msec. Middle speed mode: 1, 2, 5, 10, 20, 30 sec., 1 min., 10 min. Low speed mode: 5, 10, 20, 30 sec., 1 min., 10 min.
• Computation Functions: Square root extraction, arithmetic functions, logic functions, segment linearization and temperature/pressure compensation, moving average (between 2 - 5 samples), pulse accumulation (between 0.5 - 24 h) Alarm: Four stages alarm output. Point of contact outputs to the output modules.
• Maximum number of I/O stations High speed mode: 1 (1 station/1 node only)

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 3/14 http://www.m-system.co.jp/ Middle speed mode: 8* Low speed mode: 20* (Only the 53U and/or 73VR21x Ver.2 can be assigned for the station 9 or later.) * Max. 15 nodes can be connected per every 72EM(2)-M4 station. Only 1 node for other Ethernet devices. COM port connection is available only with Station 1 through 4. Maximum number of clients: 4 CAUTION: V 1.00x data can be imported into the V 6.00x by using the Conversion Tool. ■ SELECTABLE REMOTE I/O MODULES

• R3 Series Remote I/O SIGNAL TYPE MODELS DC voltage input R3-SV4, R3-SV4A, R3-SV4B, R3-SV4C, R3(Y)-SV8, R3-SV8A, R3-SV8B, R3-SV8C, R3(S/Y)-SV8N, R3-SV16N, R3Y -SV16 DC current input R3-SS4, R3(Y)-SS8, R3(S/Y)-SS8N, R3(Y)-SS16N Thermocouple input R3-TS4, R3-TS8 RTD input R3-RS4, R3(S)-RS4A, R3(Y)-RS8, R3-RS8A, R3-RS8B Universal input R3-US4 Discrete input R3(S/Y)-DA16, R3(Y)-DA16A, R3-DA16B, R3-DA32A, R3-DA64A Discrete output R3(Y)-DC16, R3-DC16A, R3-DC16B, R3-DC16C, R3-DC32A, R3-DC32C, R3-DC64A, R3-DC64C Discrete I/O R3(S)-DAC16 *, R3(S)-DAC16A * 4 – 20mA input with excitation supply R3(Y)-DS4, R3-DS8N, R3(Y)-DS8N Potentiometer input R3-MS4, R3(Y)-MS8 CT input R3-CT4 AC current input with clamp-on current sensor R3-CT4A , R3-CT4B , R3-CT4C, R3-CT8A , R3-CT8B , R3-CT8C PT input R3-PT4 Zero-phase current input R3-CZ4 AC power input R3-WT4, R3-WT4A, R3-WT4B, R3-WTU High speed pulse input R3-PA4 Speed/position input R3-PA2 Totalized pulse input R3-PA4A, R3-PA4B, R3(Y)-PA16, R3(S)-PA8 Strain gauge input R3-LC2 Alarm R3-AD4, R3-AR4, R3-AS4, R3-AS8, R3-AT4, R3-AV4, R3-AV8 Gateway R3-GC1, R3-GD1, R3-GE1, R3-GFL1, R3-GM1 * Only continuous output mode is available. ** Data range must be setup with the PC Con/f_i gurator Software R3CON and the dedicated cable. MODELS Modbus Network Module
• R3 Series Interface Modules NETWORK R3-NM1 Ethernet Network Module R3-NE1
• R1M, R2M, RZxS Series I/O Modules MODBUS MODULE SIGNAL TYPE MODELS R1M, RZMS, RZUS R2M DC Voltage input R1M-GH2 R1MS-GH3 RZM(U)S-U9 R2M-2G3 Thermocouple input R2M-2H3 DC Current input RTD input R1M-J3 RZM(U)S-U9Potentiometer input Discrete input R1M-A1 Discrete output R1M-D1 Pulse input R1M-P4 Totalized pulse input R1M-A1, R1M-P4
• R5 Series Remote I/O SIGNAL TYPE MODELS DC voltage input R5-SV, R5T -SV DC current input R5-SS, R5T -SS Thermocouple input R5-TS, R5T -TS RTD input R5-RS, R5T -RS Discrete input R5-DA4, R5T -DA4, R5-DA16 Discrete output R5-DC4, R5T -DC4, R5-DC16 4 – 20mA input with excitation supply R5-DS, R5T -DS Totalized pulse input R5-PA2, R5T -PA2 Potentiometer input R5-MS CT input R5T -CT AC current input with clamp-on current sensor* R5T -CTA, R5T -CTB PT input R5T -PT * Data range must be setup for use with the PC Recorder using the PC Con/f_i gurator Software R5CON and the special cable. MODELS Modbus Network Module
• R5 Series Interface Modules NETWORK R5-NM1 Ethernet Network Module R5-NE1
• R7M Series Remote I/O* SIGNAL TYPE MODELS DC voltage/current input R7M-SV4 Thermocouple input R7M-TS4 RTD input R7M-RS4 Potentiometer input R7M-MS4 CT input R7M-CT4E Totalized pulse input R7M-PA8 Discrete input R7M-DA16 Discrete output R7M-DC16A, R7M-DC16B, R7M-DC8C Discrete input (Extension) R7M-EA8, R7M-EA16 Discrete output (Extension) R7M-EC8A, R7M-EC8B, R7M-EC16A, R7M-EC16B * Must be setup with R7X Con/f_i gurator Software and the dedi- cated cable.

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 4/14 http://www.m-system.co.jp/

• R7E Series Remote I/O SIGNAL TYPE MODELS DC voltage/current input R7E-SV4 Thermocouple input R7E-TS4 RTD input R7E-RS4 Potentiometer input R7E-MS4 CT input R7E-CT4E * Discrete input R7E-DA16 Discrete output R7E-DC16A, R7E-DC16B Discrete input (Extension) R7E-EA8, R7E-EA16 Discrete output (Extension) R7E-EC8A, R7E-EC8B, R7E-EC16A, R7E-EC16B * Must be setup with R7X Con/f_i gurator Software and the dedi- cated cable.
• Multi Power Monitor SIGNAL TYPE MODELS Multi power monitor 52U 53U, L53U 54U
• Multi Power Monitoring Module SIGNAL TYPE MODELS Multi power unit (Modbus) R7MWTU R9MWTU Multi power unit ( Ethernet) R7EWTU R9EWTU Extension module Discreate input R7MWTU-EA8 Discreate I/O R9WTU-ED16 Multi power monitor R9WTU-EP8 Must be setup with R7xWTU, R9xWTU Configurator Software and the dedicated cable. MODELS Built-in input module paperless recorder Selectable input modules paperless recorder
• Paperless Recorder NETWORK 73VR21x (Ver. 2, Ver. 3) 73VR3100
• ETHERNET Tower Light SIGNAL TYPE MODELS Discrete output IT60RE, IT40SRE, IT50SRE, IT60SRE

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 5/14 http://www.m-system.co.jp/ CLIENT/ANALYZER SOFTWARE (MSR2K-C) ■ HARDWARE REQUIREMENTS HARDWARE REQUIREMENTS PC IBM PC/AT or compatible Operating system Windows 7 Professional (32-bit, 64-bit) or Windows 10 Professional (32-bit, 64-bit) CPU Pentium IV 2.0 GHz or higher Screen area XGA (1024 by 768 pixels) or better resolution; SXGA (1280 by 1024 pixels) recommended to show 50 or more groups Display color 65000 colors (16 bits) Main memory 512 MB minimum; 1 GB minimum recommended CD drive Windows supported CD drive is used to install the software program. Communication port LAN card by Windows NOTE: When the Server and the Client are used on the same PC, the PC must satisfy the Server’s system requirements. ■SOFTWARE FUNCTIONS The Client/Analyzer displays data on the screen and performs data setting. The Client can be installed in a separate PC from the one installed with the Server.

• Data Display Number of display channels: 32 pens are grouped to be displayed on one view; 64 groups in total for 2048 channels.
• Real Time Trend Display Perpendicular chart: The latest data at the top or the bottom selectable Horizontal chart: The latest data at the right or the left selectable Pen position indicator: Marker, digital value, bargraph or color graph Overview: Displays data for the all channels within a group (32 pens) or 4 groups (128 pens) Graphic panel: Displays data on a graphic background Real time analyzer: Overlapping, masking
• Batch Operation Batch operation storing: Starts/stops batch operation data storing in specific conditions per group (32 pens), and stores data in CSV file at a specified location Storing rate: 1, 2, 5, 10, 20, 30 sec., 1, 10 minutes Real time trend display: Displays batch data currently in operation with a specified background color Trend retrieval: Displays batch data spred in the past Compare: Overlapping a presently stored data on a past data, or multiple sets of retrieved data Maximum data volume: 65000 rows; 36 hours or 65000 rows, whichever comes first, with the end condition set to 'time'
• Trend retrieval Alarm history: Historical data indicating the time indexes when an alarm is triggered and reset.
• Analyzer Enlarge: Enlarges the area by mouse clicking Compare: Overlapping multiple sets of retrieved data Search: Maximum value, minimum value, conditioning, rising/sinking edges Maximum number of clients: 4 CAUTION: The MSR128 data cannot be imported into the MSR2K. ■ I/O DEVICE Depends on I/O device of server software (model: MSR2K-S).

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 6/14 http://www.m-system.co.jp/ REPORT SOFTWARE (MSR2K-CR) ■ HARDWARE REQUIREMENTS HARDWARE REQUIREMENTS PC IBM PC/AT or compatible Operating system Windows 7 Professional (32-bit, 64-bit) or Windows 10 Professional (32-bit, 64-bit) CPU Pentium IV 2.0 GHz or higher Screen area XGA (1024 by 768 pixels) or better resolution Display color 65000 colors (16 bits) Main memory 512 MB minimum; 1 GB minimum recommended CD drive Windows supported CD drive is used to install the software program. Communication port LAN card by Windows NOTE: When the Server Software (model: MSR2K-S) and the Report Software (model: MSR2K-CR) are used on the same PC, the PC must satisfy the Server’s system requirements. ■ SOFTWARE FUNCTIONS Creating reports by using data collected with the MSRpro-Server software program.

• Data acquisition Data type: Average, maximum, minimum, accumulation difference, momentary, and accumulation values
• Report Report type: Daily, monthly, and annual reports Layout: max. 16 pens per page Max. page number: 128 pages for each report Display digit: 12 digits including signs
• Data correction Applicable to: Daily, monthly, and annual reports Correction process: Calculating summary items automatically
• Data storage Storage method: Saved as a report file in any location Storage period: Depends on the period the server saves
• Print Applicable to: Daily, monthly, and annual reports Color printing: Available Auto printing: Available to specify print time and report Manual printing: Available to specify report
• Format Page title: Per report page, max. 24 characters Date: Available to display Signature column: 0 to 4 columns Summary items: Total, average, maximum and minimum Note) The software creates a report with server software Ver.3 or later. ■ I/O DEVICE Depends on I/O device of server software (model: MSR2K-S).

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 7/14 http://www.m-system.co.jp/ POWER MONITOR SOFTWARE (MSR2K-CE) ■ HARDWARE REQUIREMENTS HARDWARE REQUIREMENTS PC IBM PC/AT or compatible Operating system Windows 7 Professional (32-bit, 64-bit) or Windows 10 Professional (32-bit, 64-bit) CPU Pentium IV 2.0 GHz or higher Screen area XGA (1024 by 768 pixels) or better resolution Display color 65000 colors (16 bits) Main memory 512 MB minimum; 1 GB minimum recommended CD drive Windows supported CD drive is used to install the software program. Communication port LAN card by Windows NOTE: When the Server Software (model: MSR2K-S) and the Power Monitor Software (model: MSR2K-CE) are used on the same PC, the PC must satisfy the Server’s system requirements. ■ SOFTWARE FUNCTIONS Max. 32 of demand monitoring views are displayed by using data collected with the server software program.

• Display function Data display: Present demand value, predicted demand value, target demand value, energy consumption, surplus power, alarm status Demand display: Present demand line, predicted demand line, target demand line, alarm line are displayed. Energy consumption graph: Energy consumption at every 15, 30 or 60 min. is displayed with bargraph. Information (Demand) view: Max. daily demand value, max. monthly demand value or max. annual demand value is displayed. Information (Bargraph) view: Max. energy consumption per day, month or year is displayed. Max. view numbers: Max. 32 views for demand and bargraph view (16 views max. for damand and 2 views max. for bargraph are available simultaneously. Gas demand monitoring is available by sellecting the unit.
• Demand monitoring function Time unit: 15 min., 30 min. or 60 min. Sampling cycle: 10 seconds Calendar setting: Register pattern schedules in an annual calendar on a daily basis Pattern setting: 128 pattern Alarm: Up to 4 alarm setpoints can be set for the predicted demand. Alarm outputs to discrete output devices. Setpoints can be set for each demand view. Buzzer of your PC can be set when an alarm is generated. When connecting with the model ITx0(S)RE, ITx0(S)RE buzzer individually can be on beside normal alarm output. The buzzer can be stopped in the alarm monitor view. (the buzzer stops in all demand view pages. Operation per page is not available.) Alarm Monitor: Alarm status of each Demand view page is listed. An alarm Monitor window is popped up when an alarm is generated. Alarm history: History of alarm genaration or clear is displayed.
• Report function Printer output: daily, monthly or annual demand report is automatically or manually printed. File output: Reports can be saved as a CSV file automatically or manually. Screen shot: A screen shot is saved in BMP format. Max. MSR2K-CEC connection numbers: 4

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 8/14 http://www.m-system.co.jp/ ■ I/O DEVICE Supported device is accumulated pulse input device when pulse signal from power meter is used.

• R3 Series Remote I/O SIGNAL TYPE MODELS Totalized pulse input R3 (Y)-PA16, R3 (S)-PA8, R3-PA4A, R3-PA4B AC power input R3-WT4, R3-WT4A, R3-WT4B, R3-WTU
• R5 Series Remote I/O SIGNAL TYPE MODELS Totalized pulse input R5-PA2, R5T -PA2
• R1M Series I/O Modules SIGNAL TYPE MODELS Totalized pulse input R1M-P4, R1M-A1
• R7 Series I/O Modules SIGNAL TYPE MODELS Totalized pulse input R7M-PA8
• Multi Power Monitor SIGNAL TYPE MODELS Multi power monitor 52U 53U, L53U 54U /05&3FBEJOHFOFSHZDPOTVNQUJPOEBUBUPEJTQMBZ EFNBOEBOECBSHSBQI
• Multi Power Monitoring Module SIGNAL TYPE MODELS Multi power monitoring module (Modbus) R7MWTU R9MWTU Multi power monitoring module (Ethernet) R7EWTU R9EWTU Extension module Discrete input R7MWTU-EA8 Discrete I/O R9WTU-ED16 Multi power monitoring R9WTU-EP8
• Alarm Output Moduls SIGNAL TYPE MODELS Discrete output R1M-D1 R3-DCx R5-DCx R7M-DCx/ECx R7E-DCx/ECx LED, Buzzer IT60RE, IT40SRE, IT50SRE, IT60SRE

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 9/14 http://www.m-system.co.jp/ POWER MONITOR CLIENT SOFTWARE (MSR2K-CEC) ■ HARDWARE REQUIREMENTS HARDWARE REQUIREMENTS PC IBM PC/AT or compatible Operating system Windows 7 Professional (32-bit, 64-bit) or Windows 10 Professional (32-bit, 64-bit) CPU Pentium IV 2.0 GHz or higher Screen area XGA (1024 by 768 pixels) or better resolution Display color 65000 colors (16 bits) Main memory 512 MB minimum; 1 GB minimum recommended CD drive Windows supported CD drive is used to install the software program. Communication port LAN card by Windows NOTE: Power Monitor Client Software (model: MSR2K-CEC) does not run in the PC where Power Monitor Software (model: MSR2K-CE) is running. ■ SOFTWARE FUNCTIONS Reading settings and data of MSReco and displaying demand.

• Display function Data display: Present demand value, predicted demand value, target demand value, energy consumption, surplus power, alarm status Demand display: Present demand line, predicted demand line, target demand line, alarm line are displayed. Bargraph view: Energy consumption at every hour, day, week, month or year is displayed with bar graph. Information (Demand) view: Max. daily demand value, max. monthly demand value or max. annual demand value is displayed. Information (Bargraph) view: Max. energy consumption per day, month or year is displayed. Max. view numbers: Max. 32 views for demand and bargraph view (16 views max. for damand and 2 views max. for bargraph are available simultaneously. Alarm Monitor: Alarm status of each Demand view page is listed. Alarm history: History of alarm genaration or clear is displayed.
• Report function Printer output: daily, monthly or annual demand report is automatically or manually printed. File output: Reports can be saved as a CSV file automatically or manually. Screen shot: A screen shot is saved in BMP format. ■ I/O DEVICE Depends on I/O device of power monitor software (model: MSR2K-CE).

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 10/14 http://www.m-system.co.jp/ SYSTEM CONFIGURATION EXAMPLES &UIFSOFU ɾɾɾɾ )6# &UIFSOFU &5)&3/&5 36/ 4&/% '*&-% $/'( ■ R3, R5, R7 SERIES Network Module (model: R3-NE1) Network Module (model: R5-NE1) I/O Modules I/O ModulesNetwork Module (model: R3-NE1) I/O Modules Server PC (model: MSR2K-S) Server PC (model: MSR2K-S) Client PC (model: MSR2K-C) Report PC (model: MSR2K-CR) Client PC (model: MSR2K-C) Report PC (model: MSR2K-CR) ■ 73VR SERIES Note 1. Use a dedicated Ethernet network for the PC and the R3 modules. Note 2. Max. four (4) Client PC. Note 3. Max. eight (8) R3 stations. Note 4. Actual sampling rate depends upon the number of connected slave devices. Paperless Recorder (model: 73VR3100) Paperless Recorder (model: 73VR21x, Ver.2) DC Voltage/Current Input Module (model: R7M-SV4) RTD Input Module (model: R7M-RS4) Thermocouple Input Module (model: R7E-TS4) Switching Hub (100 Mbps) Switching Hub (100 Mbps) Communication Adaptor (models: 72EM-M4 *, 72EM2-M4) *V1.01.03 or higher Printer Printer

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 11/14 http://www.m-system.co.jp/ RS-485 RS-485 Ethernet RS-485 1234 56 7 890 ETHERNET RUN SEND FIELD CNFG RS-485 ETHERNET RUN SEND FIELD CNFG RS-485 Note 1. Use a dedicated Ethernet network for the PC and the R3 modules. Note 2. Max. four (4) Client PC. Note 3. Max. eight (8) R3 stations. Note 4. Actual sampling rate depends upon the number of connected slave devices. Ethernet PC Recorder (model: RZMS-U9) PC Recorder (model: RZMS-U9) PC Recorder (model: RZMS-U9) PC Recorder (model: RZMS-U9) PC Recorder (model: R1M-A1) PC Recorder (model: R1M-D1) PC Recorder (model: R1M-GH) PC Recorder (model: R1M-D1) PC Recorder (model: R1M-GH) Client PC (model: MSR2K-C) Client PC (model: MSR2K-C) Server PC (model: MSR2K-S) RS-232-C/RS-485 Converter (model: R2K-1) ■ R1M, R2M, RZxS SERIES [Example 1] [Example 2] Switching Hub (100 Mbps) HUBSwitching Hub (100 Mbps) Server PC (model: MSR2K-S) Client PC (model: MSR2K-C) Report PC (model: MSR2K-CR) Printer Communication Adaptor (models: 72EM-M4 *, 72EM2-M4) *V1.01.03 or higher Communication Adaptor (models: 72EM-M4 *, 72EM2-M4) *V1.01.03 or higher

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 12/14 http://www.m-system.co.jp/ Ethernet P 52U AX IN Ethernet RS-485 1234 56 7 890 AX IN AX IN AX IN Multi Power Monitor (model: 53U, 54U) Multi Power Monitor (model: 53U, 54U) Multi Power Monitor (model: 53U, 54U) Multi Power Monitor (model: 53U, 54U) Multi Power Transducer (model: L53U) Multi Power Transducer (model: L53U) Server PC (model: MSR2K-S) RS-232-C/RS-485 Converter (model: R2K-1) ■ 52U, 53U [Example 1] [Example 2] Server PC (model: MSR2K-S) Client PC (model: MSR2K-C) Client PC (model: MSR2K-C) Client PC (model: MSR2K-C) Report PC (model: MSR2K-CR) Switching Hub (100 Mbps) (100 Mbps) Printer Switching Hub Communication Adaptor (models: 72EM-M4 *, 72EM2-M4) *V1.01.03 or higher Communication Adaptor (models: 72EM-M4 *, 72EM2-M4) *V1.01.03 or higher Multi Power Monitor with Modbus Extension Module (model: 52U + 52U-TM) Switching Hub (100 Mbps) ETHERNET RUN SEND FIELD CNFG RS-485 ETHERNET RUN SEND FIELD CNFG RS-485

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 13/14 http://www.m-system.co.jp/ ■ MSReco Ethernet RS-485 1234 56 7 890 Server PC (model: MSR2K-S) Client PC (model: MSR2K-C) Client PC (model: MSR2K-C) Power Monitor PC (model: MSR2K-CE) Power Monitor PC (model: MSR2K-CE) Power Monitor Client PC (model: MSR2K-CEC) Power Monitor Client PC (model: MSR2K-CEC) [Example 1] [Example 2] Printer Switching Hub (100 Mbps) Network Module (model: R3-NE1) Multi Power Monitoring Module (model: R7EWTU) Multi Power Monitoring Module (model: R7MWTU) Multi Power Monitoring Unit (model: R9EWTU) Multi Power Monitoring Unit (model: R9MWTU) Multi Power Monitoring Unit (model: R9MWTU) Ethernet Tower Light (model: IT60RE, IT40SRE, IT50SRE, IT60SRE) Switching Hub (100 Mbps) Server PC (model: MSR2K-S) RS-232-C/RS-485 Converter (model: R2K-1)

MODEL: MSR2K-V6 MSR2K-V6 SPECIFICATIONS ES-7405 Rev.3 Page 14/14 http://www.m-system.co.jp/ Specifications are subject to change without notice.