MSPD101X-XXX MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Surface Mount Package: 3.3 mm (L) x 2.8 mm (W) x 1.5 mm (H) RoHS* Compliant
Applications
Phase Lock Loops High Frequency Sampling
Description
The products of the MSPD101x -x series are fully - contained sampling phase detectors, each comprising a beam lead silicon step recovery diode, beam lead DC blocking capacitors and a beam lead series-tee pair of low -barrier silicon Schottky diodes mounted on a ceramic substrate. The semiconductors and chip capacitors are protected with an epoxy encapsulation on the top side of the ceramic substrate. These products are manufactured using a proven diode fabrication and assembly processes which optimize diode characteristics for optimal electrical performance and excellent reliability. These low profile, compact surface mount components offer RF and microwave signal performance superior to comparable chip -and-wire discrete devices in leaded packages. These rugged devices are capable of reliable operation in all military, commercial and industrial applications. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. Pin # Description
1 Cathode terminal of step recovery diode
2 Anode terminal of step recovery diode
3 Cathode connection of Schottky diode series tee
4 Center node of Schottky diode series tee
5 Anode connection of Schottky diode series tee
Part # Description Packaging MSPD1011-xxx1-T Low Barrier Tube MSPD1012-xxx1-T Medium Barrier MSPD1013-xxx1-T High Barrier MSPD1011-xxx1-R Low Barrier 250 or 500 piece reel MSPD1012-xxx1-R Medium Barrier MSPD1013-xxx1-R High Barrier MSPD1011-xxx1-W Low Barrier Waffle Pack MSPD1012-xxx1-W Medium Barrier MSPD1013-xxx1-W High Barrier
Ordering Information
- Insert 121 for ceramic or 122 for epoxy. CS121 CS122
10 MHz - 20 GHz
Rev. V1 MSPD101x-xxx Series 2 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0012374 Electrical Specifications: TA = +25°C Parameter Conditions MSPD1011 MSPD1012 Units MSPD1013 Microwave Signal Level — -3 to 0 0 to 3 0 to 13 dBm Schottky Diode Barrier Height Low Medium High Forward Voltage IF = 1 mA 270 — 350 370 — 550 600 — 700 mV Junction Capacitance VR = 0 V, 1 MHz — — 0.1 — — 0.1 — — 0.1 pF Total Resistance IF = 5 mA — — 24 — — 24 — — 24 Ω Step Recovery Diode Breakdown Voltage IR = 10 µA — 20 30 — 20 30 — 20 30 V Carrier Lifetime IF = 10 mA, IR = 6 mA — 10 — — 10 — — 10 ns Transition Time IF = 10 mA, VR = 10V — 70 — — 70 — — 70 — ps Junction Capacitance VR = 0 V, 1 MHz — — 0.25 — — 0.25 — — 0.25 pF DC Block Capacitance Absolute Maximum Ratings @ TA = 25°C (Unless otherwise noted) Parameter Absolute Maximum Conditions RF Incident Power 27 dBm 20 dBm Applied to step recovery diode (pin 1 to pin2) Applied to microwave input (pin 4) Total Dissipated Power 100 mW Infinite heat sink, TC = 25°C. Derate power linearty from 100 mW @ 85°C to 0 W @ 125°C Junction Temperature 150°C — Operating Temperature -55°C to +125°C — Storage Temperature -65°C to +150°C —
Rev. V1 MSPD101x-xxx Series 3 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0012374 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. The moisture sensitivity level (MSL) rating is 1. Environmental Capabilities The MSPD101x -121 sampling phase detectors are capable of meeting the environmental requirements of MIL-STD-750 and MIL-STD-883. Typical Performance: TA = +25°C, Z0 = 50 Ω Recommended Circuit
Rev. V1 MSPD101x-xxx Series 4 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0012374 Assembly Instructions The MSPD101x family of sampling phase detectors may be soldered to a printed circuit using conventional solder reflow or wave soldering procedures with RoHS type or Sn60/Pb40 type solders per the recommended time temperature profile described in Table I and Figure I.
Rev. V1 MSPD101x-xxx Series 5 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0012374 Outline Drawing (CS121) Outline Drawing (CS122)
Rev. V1 MSPD101x-xxx Series 6 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0012374 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale.