MSP300 TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

SENSOR SOLUTIONS ///MSP300 Page 1 09/2015

FEATURES

APPLICATIONS

 One Piece Stainless Steel Construction  Ranges up to 15kpsi  Digital Pressure and Temperature Output or Analog mV/Amplified Output  ±1 %Span Accuracy  UL Certification (analog only)  Pumps and Compressors  Hydraulic/Pneumatic Systems  Automotive Test Systems  Energy and Water Management  Medical Gas Pressure  Leak Detection  Remote Measuring Systems  General Pressure Measurements MSP300 Pressure Transducer SPECIFICATIONS  Analog Output or 14-Bit Digital Pressure with 11-Bit Temperature Output  One Piece Stainless Steel Construction  Low Cost  17-4PH or 316L Stainless Steel  Customizable The MSP300 pressure transducer from the Microfused line of TE is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4PH or 316L stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. With excellent durability, t here are no o-rings, welds or organics exposed to the pressure media. TE’s proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless steel diaphragm. This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor without the PN junctions of conventional micromachined sensors. This product is geared towards industrial and commercial OEMs for small to high volume applications. Standard configurations are suitable for many applications. Please contact factory for your customization needs.

SENSOR SOLUTIONS ///MSP300 11/2016 Page 2 STANDARD RANGES (ALL INTERMEDIATE RANGES ARE STANDARD) Range (psi) Range (Bar) Gage/Compound 0 to 100 0 to 007  0 to 200 0 to 010  0 to 300 0 to 020  0 to 500 0 to 035  0 to 01k 0 to 070  0 to 03k 0 to 200  0 to 05k 0 to 350  0 to 10k 0 to 700  0 to 15k 0 to 01k  PERFORMANCE SPECIFICATIONS (ANALOG) Supply Voltage: 5.0V, Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Pressure Accuracy (RSS combined Non Linearity, Hysteresis & Repeatability) -1 1 %Span BFSL @ 25°C Pressure Cycles 1.00E+6 0~F.S. Cycles Proof Pressure 2X Rated Burst Pressure 5X Rated Isolation, Body to Any Lead 50 MΩ @ 250Vdc Long Term Stability (1 year) -0.25 0.25 %Span Zero Thermal Error -2.0 2.0 %Span Over comp. temp Span Thermal Error -2.0 2.0 %Span Over comp. temp Zero Offset (mV Output) -3.0 3.0 %Span @ 25°C Zero Offset (V Output) -2.0 2.0 %Span @ 25°C Span Tolerance -2.0 2.0 %Span @ 25°C Compensated Temperature 0 55 °C Operating Temperature -20 +85 °C Storage Temperature -40 +85 °C Load Resistance (RL, mV Output) 1 MΩ Load Resistance (RL, V Output) 5 KΩ Response Time 1 ms Bandwidth DC to 1KHz (typical) Shock 50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A Vibration ±20g, MIL-STD-810C, Procedure 514.2-2, Curve L Wetted Material (except elastomer seal) 17-4PH or 316L Stainless Steel For custom configurations, consult factory.

SENSOR SOLUTIONS ///MSP300 11/2016 Page 3 PERFORMANCE SPECIFICATIONS (DIGITAL) Supply Voltage: 3.3V, Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Supply Voltage 2.7 5.0 Vdc Output at Zero Pressure 720 1000 1280 Count Output at FS Pressure 14720 15000 15280 Count Current Consumption 3.5 mA Proof Pressure 2X Rated Burst Pressure 5X Rated Isolation, Body to Any Lead 50 MΩ @ 250Vdc Pressure Cycles 1.00E+6 0~F.S. Cycles Pressure Accuracy (RSS combined Non Linearity, Hysteresis & Repeatability) -1 1 %Span BFSL @ 25°C Temperature Accuracy -3 3 °C 1 Zero Thermal Error -2.0 2.0 %Span Over comp. temp Span Thermal Error -2.0 2.0 %Span Over comp. temp Long Term Stability (1 year) -0.25 0.25 %Span @ 25°C Compensated Temperature 0 55 °C Compensated Temperature Output 512 1075 Count Operating Temperature -20 +85 °C Storage Temperature -40 +85 °C Shock 50g, 11 msec Half Sine Shock per MIL -STD-202G, Method 213B, Condition A Vibration ±20g, MIL-STD-810C, Procedure 514.2-2, Curve L Wetted Material (except elastomer seal) 17-4PH or 316L Stainless Steel For custom configurations, consult factory. Notes 1. Pressure port temperature over compensated temperature range.

SENSOR SOLUTIONS ///MSP300 11/2016 Page 4 DIMENSIONS OUTPUT (ANALOG) Code Output Supply Ratiometricity Red Black Green White 1 0 – 50mV 5V Yes +Supply -Supply +Output -Output 2 0 – 100mV 5V Yes +Supply -Supply +Output -Output 3 0.5 – 4.5V 5 ± 0.25V Yes +Supply Common Cut Off +Output 4 1 – 5V 10 – 30V No +Supply Common Cut Off +Output 5 4 – 20mA 9 – 30V No +Supply -Supply Cut Off Cut Off OUTPUT (DIGITAL) Code Output Supply Red Black Green White Yellow J I2C 2.7 – 5.0V +Supply -Supply SCL SDA -- S SPI 2.7 – 5.0V +Supply -Supply SCLK MISO SS CODE PORT DIM C 2 1/4-19 BSPP 0.453 [11.50] 7/16-20 UNF-A MALE SAE J514 STRAIGHT THREAD O- RING BUNA-N 70SH-904, ID8.92mm x W1.83mm 0.435 [11.05] 5 1/4-18 NPT 0.596 [15.14] 6 1/8-27 NPT 0.475 [12.06] E 1/4-19 BSPT 0.50 [12.70] F 1/4-19 BSPP FEMALE 0.70 [17.78] K 1/8-27 NPT FEMALE 0.70 [17.78] P 7/16-20 UNF-2A FEMALE SAE J514 STRAIGHT THREAD WITH INTEGRAL VALVE DEPRESSOR 0.689 [17.50] Q M10 x 1.0 mm 0.42 [10.67] S M12 x 1.5 mm 0.53 [13.46] U G/14 DIN 3852 FORM E GASKET DIN3869-14 NBR 0.547 [13.90] W M20 x 1.5 mm 0.702 [17.83] CODE CONNECTION TYPE

1 CABLE 2 FT

2 CABLE 4 FT

3 CABLE 10 FT

SENSOR SOLUTIONS ///MSP300 11/2016 Page 5 PRESSURE OUTPUT

SENSOR SOLUTIONS ///MSP300 11/2016 Page 6 TEMPERATURE OUTPUT

SENSOR SOLUTIONS ///MSP300 11/2016 Page 7

ORDERING INFORMATION

M30 2 1 - 0 0 0 0 0 5 - 100P G Model Output Connection Type - Port Material Oxygen Clean 0 Sleep Mode (Digital Only) Address for I2C (Digital Only) Pressure Port - Pressure Range Pressure Type M30 1 = 0 – 50mV 2 = 0 – 100mV 3 = 0.5 – 4.5V 4 = 1 – 5V 5 = 4 – 20mA J = I2C S = SPI 1 = Cable 2 ft 2 = Cable 4 ft 3 = Cable 10 ft M = Cable 1 m N = Cable 2 m P = Cable 5 m R = Cable 10 m 0 = 17- 4PH SS 1 = 316L SS 0 = No Selection 1 = Oxygen Clean B40.1 Level IV 0 = Without Sleep Mode 1 = With Sleep Mode (If Analog, use “0”) 0 = 0x28H 1 = 0x36H 2 = 0x46H 3 = 0x48H 4 = 0x51H (If Analog or SPI, use “0”) 2 = 1/4-19 BSPP 4 = 7/16-20 UNF-2A Male SAE J514 Straight Thread O- Ring BUNA-N 70SH- 904, ID8.92mm x W1.83mm 5 = 1/4-18 NPT 6 = 1/8-27 NPT E = 1/4-19 BSPT F = 1/4-19 BSPP Female K = 1/8-27 NPT Female P = 7/16-20 UNF-2A Female SAE J514 Straight Thread with Integral Valve Depressor Q = M10 x 1.0 mm S = M12 x 1.5 mm U = G1/4 DIN 3852 Form E Gasket DIN3869-14 NBR W = M20 x 1.5 mm 100P 200P 300P 500P 01KP 03KP 05KP 10KP 15KP 007B 010B 020B 035B 070B 200B 350B 700B 01KB G = Gage C = Compound NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity company

45738 Northport Loop West

Fremont, CA 94538 Tel: +1 800 767 1888 Fax: +1 510 498 1578 customercare.frmt@te.com MEAS France SAS, a TE Connectivity company

4 Rue Gaye Marie

31027 Toulouse, France

Tel: +33 (5) 822 822 00 Fax: +33 (5) 820 821 51 customercare.tlse@te.com Measurement Specialties (China) Ltd., a TE Connectivity company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen, 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s ob ligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved.