MSMLJ5.0A MICROSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841 Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com RF01003 Rev A, June 2010 High Reliability Product Group Page 1 of 4 DEVICES MSMLJ5.0A thru MSMLJ170CA, e3 and MSMLG5.0A thru MSMLG170CA, e3 LEVELS M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Optional u pscreening available by replacing the M pre fix with MA, MX or MXL. These prefixes specify various screening and conformance inspection options based on MIL -PRF-19500. Refer to MicroNote 129 for more details on the screening options. Axial-lead equivalent packages for thru-hole mounting available as M5KP5.0A to M5KP110CA with 5000 W rating, (consult factory for other surface mount options) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant devices available by adding an “e3” suffix 3σ lot norm screening performed on Standby Current ID APPLICATIONS / BENEFITS Suppresses transients up to 3000 watts @ 10/1000 µs Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: o Class 1 & 2: MSML5.0A to MSML 170ACA o Class 3: MSML5.0A to MSML150CA o Class 4: MSML5.0A to MSML75CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: o Class 1: MSML5.0A to MSML170CA o Class 2: MSML5.0A to MSML90CA o Class 3: MSML5.0A to MSML48CA o Class 4: MSML5.0A to MSML24CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: o Class 2: MSML5.0A to MSML43CA o Class 3: MSML5.0A to MSML22CA o Class 4: MSML5.0A to MSML10CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 ºC: 3000 watts at 10/1000 μs (also see Fig ures 1,2, and 3) with impulse repetition rate (duty factor) of 0.01 % or less tclamping (0 V to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65 ºC to +150 ºC Thermal resistance: 17.5 ºC/W junction to lead, or 77.5 ºC/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint Steady-State Power dissipation: 6 watts at TL = 45 ºC, or 1.61 watts at TA = 25 ºC when mounted on FR4 PC board with recommended footprint (see page 2) Forward Surge at 25 ºC: 200 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only) Solder temperatures: 260 ºC for 10 s (maximum) SURFACE MOUNT 3000 Watt Transient Voltage Suppressor - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Available in both J-bend and Gull-wing terminations - Selections for 5.0 to 170 V standoff voltages (VWM)
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841 Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com RF01003 Rev A, June 2010 High Reliability Product Group Page 2 of 4 MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte -tin plating solderable per MIL-STD-750, method 2026 Cathode indicated by band. No cathode band on bi-directional devices. Part number marked on package Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL option available with up to 750 per 7 inch reel or up to 2500 per 13 inch reel EIA-481-B with 16 mm tape. Add “TR” suffix to part number. Weight: 0.25 gram (approximately) PACKAGE DIMENSIONS PAD LAYOUT DIMENSIONS IN INCHES A B C D E F K L DIMENSIONS IN MILLIMETERS Typical Standoff Height: 0.004” – 0.008” (0.1mm – 0.2mm) INCHES mm A 0.390 9.90 B 0.110 2.79 C 0.150 3.81 INCHES mm A 0.510 12.95 B 0.110 2.79 C 0.150 3.81 SYMBOLS & DEFINITIONS Symbol Definition Symbol Definition VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current PPP Peak Pulse Power VC Clamping Voltage VBR Breakdown Voltage IBR Breakdown Current for VBR ID Standby Current (DO-214AB) (DO-215AB) (SMLJ) (SMLG) SMLJ (DO-214AB) SMLG (DO-215AB)
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841 Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com RF01003 Rev A, June 2010 High Reliability Product Group Page 3 of 4 ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER REVERSE STAND-OFF VOLTAGE VWM BREAKDOWN VOLTAGE VBR @ IBR MAXIMUM CLAMPING VOLTAGE VC @ IPP PEAK PULSE CURRENT (see Fig. 2) IPP MAXIMUM STANDBY CURRENT ID @ VWM GULL-WING J- BEND V V mA V A A MSMLG5.0A MSMLG6.0A MSMLJ5.0A MSMLJ6.0A 5.0 6.0 6.40 – 7.00 6.67 – 7.37 9.2 10.3 326.0 291.3 1000 1000 MSMLG6.5A MSMLG7.0A MSMLJ6.5A MSMLJ7.0A 6.5 7.0 7.22 – 7.98 7.78 – 8.60 11.2 12.0 267.9 250.0 500 200 MSMLG7.5A MSMLG8.0A MSMLJ7.5A MSMLJ8.0A 7.5 8.0 8.33 – 9.21 8.89 – 9.83 12.9 13.6 232.6 220.6 100 MSMLG8.5A MSMLG9.0A MSMLJ8.5A MSMLJ9.0A 8.5 9.0 9.44 – 10.4 10.0 – 11.1 14.4 15.4 208.4 194.8 MSMLG10A MSMLG11A MSMLJ10A MSMLJ11A 11.1 – 12.3 12.2 – 13.5 17.0 18.2 176.4 164.8 MSMLG12A MSMLG13A MSMLJ12A MSMLJ13A 13.3 – 14.7 14.4 – 15.9 19.9 21.5 150.6 139.4 MSMLG14A MSMLG15A MSMLJ14A MSMLJ15A 15.6 – 17.2 16.7 – 18.5 23.2 24.4 129.4 123.0 MSMLG16A MSMLG17A MSMLJ16A MSMLJ17A 17.8 – 19.7 18.9 – 20.9 26.0 27.6 115.4 106.6 MSMLG18A MSMLG20A MSMLJ18A MSMLJ20A 20.0 – 22.1 22.2 – 24.5 29.2 32.4 102.8 92.6 MSMLG22A MSMLG24A MSMLJ22A MSMLJ24A 24.4 – 26.9 26.7 – 29.5 35.5 38.9 84.4 77.2 MSMLG26A MSMLG28A MSMLJ26A MSMLJ28A 28.9 – 31.9 31.1 – 34.4 42.1 45.4 71.2 66.0 MSMLG30A MSMLG33A MSMLJ30A MSMLJ33A 33.3 – 36.8 36.7 – 40.6 48.4 53.3 62.0 56.2 MSMLG36A MSMLG40A MSMLJ36A MSMLJ40A 40.0 – 44.2 44.4 – 49.1 58.1 64.5 51.6 46.4 MSMLG43A MSMLG45A MSMLJ43A MSMLJ45A 47.8 – 52.8 50.0 – 55.3 69.4 72.7 43.2 41.2 MSMLG48A MSMLG51A MSMLJ48A MSMLJ51A 53.3 – 58.9 56.7 – 62.7 77.4 82.4 38.8 36.4 MSMLG54A MSMLG58A MSMLJ54A MSMLJ58A 60.0 – 66.3 64.4 – 71.2 87.1 93.6 34.4 32.0 MSMLG60A MSMLG64A MSMLJ60A MSMLJ64A 66.7 – 73.7 71.1 – 78.6 96.8 103.0 31.0 29.2 MSMLG70A MSMLG75A MSMLJ70A MSMLJ75A 77.8 – 86.0 83.3 – 92.1 113 121 26.6 24.8 MSMLG78A MSMLG85A MSMLJ78A MSMLJ85A 86.7 – 95.8 94.4 – 104.0 126 137 22.8 20.8 MSMLG90A MSMLG100A MSMLJ90A MSMLJ100A 100 100 – 111 111 – 123 146 162 20.6 18.6 MSMLG110A MSMLG120A MSMLJ110A MSMLJ120A 110 120 122 – 135 133 – 147 177 193 16.8 15.6 MSMLG130A MSMLG150A MSMLJ130A MSMLJ150A 130 150 144 – 159 167 – 185 209 243 14.4 12.4 MSMLG160A MSMLG170A MSMLJ160A MSMLJ170A 160 170 178 – 197 189 – 209 259 275 11.6 11.0 NOTE 1: For Bidirectional device types indicate a CA suffix after the part number (i.e. MSMLG170 CA). Bidirectional capacitance is half that shown in Figure 4 at zero volts. NOTE 2: Microsemi Corp’s SML series (3000W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance p ath for surge current flow to ground. These high -speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices.