MSMDP19

MSMDP19_V01 SCHURTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Metal Line Switches MSM DP 19https://www.schurter.com /PG70 Switches Momentary action switch double pole RI homogeneous blue Point Illumination green Non-illuminated grey See below: Approvals and Compliances

Description

• Available in version Standard, lettered, with Point Illumination or Ring Illumination - Assembly method: clip micro-switch into the saddle, secure switch using mounting nut - Equipped with flat-pin plugs to permit fast connection Characteristics - Housing and actuating area material: high-quality stainless steel for use in harsh environments (see technical data) - Variety of design options regarding size, colour, illumination, connec- tion or lettering - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A - double pole version with two switching contact sets, can be wired as NO, NC or as change-over - IP-Protection: IP67 from front side to contact area, Micro-Switch is available in versions IP40 or IP67 References Alternative: switch with latching function: Alternative: switch with backlighted illumination: MSM CS 19 Alternative: Other diameter Alternative: Standard version MSM DP 22; MSM DP 30 Weblinks pdf data sheet, html datasheet, General Product Information, CAD- Drawings, Product News, Detailed request for product

Metal Line SwitchesMSM DP 19 https://www.schurter.com /PG70 Switches Technical Data Electrical Data Switching Function momentary Number of Poles DPDT Supply Voltage 24 VDC Ring Illumination , LED opera- ting data are listed in separate table

5 VDC and 12 VDC RI variants (except

for RGB) on request (MOQ 500 pieces) Impulse Withstand Voltage (ESD) 2 kV with Ring Illumination Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Contact Material Ag Switching Voltage max. 125/250 VAC Switching Current max. 5 / 3 A Rated Switching Capacity 750 W Lifetime 0.2 million actuations at Rated Swit- ching Capacity Contact Resistance < 30 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch 0,1 A / 30 VDC, IP40 Contact Material Au Switching Voltage max. 30 VDC Switching Current max. 0.1 A Rated Switching Capacity 3 W Lifetime 0.2 million actuations at Rated Swit- ching Capacity Contact Resistance < 50 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch for Electrical Rating 10 A / 250 VAC (Protection Class IP40) Contact Material Ag Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.2 million actuations at Rated Swit- ching Capacity Contact Resistance < 30 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch 6 A / 250 VAC, IP67 Switching Voltage max. 250 VAC Switching Current max. 5 Rated Switching Capacity 1250 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 0,1 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 0.1 Rated Switching Capacity 25 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 10 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.01 million actuations at Rated Swit- ching Capacity Mechanical Data Actuating Force 5.0 N Actuating Travel 1.0 mm Lifetime 1.5 million actuations Shock Protection IK07 Mounting screw torque Plastic Nut max. 4.5 Nm Mounting screw torque Stain- less Steel Nut max. 12 Nm Climatical Data Operating Temperature -25 to 85 °C Storage Temperature -25 to 85 °C Protection Class IP67 Salt Spray Test (acc. to DIN 50021-SS) 24 h / 48 h / 96 h Residence Time Material Housing Stainless Steel Actuator Stainless Steel Light Conductor (Point Illumi- nation) PC Illuminated Ring (Ring Illumi- nation) PA for dotted single color variants PMMA for homogeneous single color variants Seal Ring NBR70 Switcher Collet PA Intermediate Connector non- illuminated PA Intermediate Connector illumi- nated PA Switcher Adapter PA Plastic Nut PA, UL94 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER.

Metal Line Switches MSM DP 19https://www.schurter.com /PG70 Switches Product standards Product standards that are referenced Organization Design Standard Description Designed according to DIN EN 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 1054 UL standard for safety special-use switches Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Compliances The product complies with following Guide Lines Identification Details Initiator Description RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] MSM 19 DP ST C 10,50 M19x0,75 22,80 0,50 mmmax. 6 1,75 ø22 2,80 37,40 15,80 COMN CNO MSM 19 DP LE 18,15-0,05 C 22,80 M x0,75 mm 10,50 0,50 max. 6 1,75 ø15,80 COMN ON C 22ø 2,80 37,40 MSM 19 DP PI 18.15-0.05 F ø15.80 2.80 ø22 37.40 C mm x0.75 0.50 1.75 M max. 6 10.50 25.80 COMNC NO MSM 19 DP RI C 0.50 M mm x0.75 10.50 max. 6 1.75 25.80 G ø22 2.80 37.40 COMNC NO E D ø 15.7 B ø 11.9

Metal Line SwitchesMSM DP 19 https://www.schurter.com /PG70 Switches Legend B = Actuating Area C = Sealing D = Nut E = Anti-rotation protection F = Point illumination G = Illumination ring Tolerance Range Actuator Tolerance Range 0.20 0.20 The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. Dimension MSM 19 DP ST / MSM 19 DP RI Drilling diagram MSM 19 DP LE / MSM 19 DP PI / MSM 19 DP RI optional Drilling diagram Assembly Instructions I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch function. 2.) Insulate the terminals as required. Fully insulated plug-in sleeves are recommended. 3.) Installation instructions according to VDE-standard DIN VDE 0100-100 or alternatively IEC 60354 standard

Metal Line Switches MSM DP 19https://www.schurter.com /PG70 Switches Diagrams MSM DP ST / MSM DP LE COM NO NC COM NO NC MSM DP PI COM NO NC COM NO NC MSM DP RI Rv Rv D 3 D 2 D 1 D 4 D 5 D 6 COM NO NC COM NO NC Point Illumination Operating Data Forward Current max. Forward Voltage at 10 mA Forward Voltage at 8 mA Forward Voltage at 20 mA Forward Voltage max. LED red 30 mA 1.9 VDC 3.0 VDC LED green 30 mA 2.1 VDC 3.0 VDC LED yellow 30 mA 2.1 VDC 3.0 VDC LED blue 20 mA 3.7 VDC 4.5 VDC LED white 30 mA 3.6 VDC 4.0 VDC LED red / green 25 mA 2.0 VDC / 2.2 VDC Attention: Switches are delivered without series resistor. Marking The last three digits in the order number define the lettering:

000 No Lettering

001-074 Standard Lettering 101- Customized Lettering Lettering Colour of Laser Lettering Material Lettering Colour Stainless Steel black Filled letters

Metal Line SwitchesMSM DP 19 https://www.schurter.com /PG70 Switches Order Index Lettering Laser Marking 001 =A 021 =U 041 =÷ 061 =EIN 002 =B 022 =V 042 = ✳ 062 =AUS 003 =C 023 =W 043 == 063 =AUF 004 =D 024 =X 044 = # 064 =AB 005 =E 025 =Y 045 = ↔ 065 =ON 006 =F 026 =Z 046 = ↕ 066 =OFF 007 =G 027 =0 047 = → 067 =UP 008 =H 028 =1 048 = ← 068 =DOWN 009 =I 029 =2 049 = ↓ 069 =HIGH 010 =J 030 =3 050 = ↑ 070 =LOW 011 =K 031 =4 051 = % 071 =ON/OFF 012 =L 032 =5 052 = √ 072 =START 013 =M 033 =6 053 =CTRL 073 =RESET 014 =N 034 =7 054 =RETURN 074 = 015 =O 035 =8 055 =SHIFT 075 = 016 =P 036 =9 056 =LOCK 076 = 017 =Q 037 =+ 057 =STOP 077 = 018 =R 038 =- 058 =ENTER 019 =S 039 =. 059 =BACK 020 =T 040 = x 060 =LINE Please note that the font size depends on the number of characters All Variants IP Switching Unit Switching Current Switching Voltage Illumination, LED Housing Material, Torsion Protection Actuator Material, Tor sion Protection Config. Code Order Number [A] [VAC/ VDC] IP40 5 / 3 A 125/250 VAC non-illuminated Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP LE 1241.6922.1120000 IP40 5 / 3 A 125/250 VAC Point Illumination, blue Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP PI blue 1241.6923.1124000 IP40 5 / 3 A 125/250 VAC Point Illumination, red Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP PI red 1241.6923.1121000 IP40 5 / 3 A 125/250 VAC Point Illumination, green Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP PI green 1241.6923.1122000 █ IP40 5 / 3 A 125/250 VAC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 19 DP Pcs 1241.6921.1120000 █ IP40 5 / 3 A 125/250 VAC RI dotted, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI blue 1241.6924.1124000 █ IP40 5 / 3 A 125/250 VAC RI homogeneous, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI blue 3-108-963 █ IP40 5 / 3 A 125/250 VAC RI dotted, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI red 1241.6924.1121000 IP40 5 / 3 A 125/250 VAC RI homogeneous, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI red 3-108-951 █ IP40 5 / 3 A 125/250 VAC RI dotted, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI green 1241.6924.1122000 █ IP40 5 / 3 A 125/250 VAC RI homogeneous, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 19 DP RI green 3-108-962 █ IP-Protection: IP67 from front side to contact area, Micro-Switch is available in versions IP40 or IP67, see Technical Data Micro-Switch Variants with 6 A micro switch have IP67 The MOQ for standard laser lettering on standard variants is a packing unit.

5 VDC and 12 VDC RI variants (except for RGB) on request (MOQ 500 pieces)

Customer-specific versions available on request. Special materials for use in salt and chlorinated environment on request. The nut with gasket and micro switch are enclosed in the box. █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

Metal Line Switches MSM DP 19https://www.schurter.com /PG70 Switches Packaging unit 10 in box with insert or packed in air cushion bags Accessories Power Supply IP42 for LED- and Illumination applications indoor 90~264 VAC => 24 VDC 0.34 A 8 W The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 05.01.2022