MSMCS22

MSMCS22_V02 SCHURTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Metal Line Switches MSM CS 22https://www.schurter.com /PG70 Switches Metal Switch with Ceramic Actuator, Switching Voltage up to 30 VDC / 250 VAC See below: Approvals and Compliances

Description

• Momentary action switch available in version: Standard (ST), with Let- tering (LE), with Backlighting (BL) - Single color or RGB illumination - Choice from 7 colors for RGB variants Assembly method: clip micro- switch into the saddle, secure switch using mounting nut - Equipped with flat-pin plugs to permit fast connection Unique Selling Proposition - Attractive tactile feedback - High quality materials - Long life span - Single color or homogeneous multicolor illumination Characteristics - Housing material: high-quality stainless steel, actuator material: highly durable ceramic - Variety of design options regarding size, colour, illumination, connec- tion or lettering - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A - Backlighting optional, this means the complete actuator surface is fully illuminated - IP-Protection: IP65 from front side to contact area, Micro-Switch is available in versions IP40 or IP67, moving actuator is rated IP40 to frontside - For use in harsh environments (see technical data) References Alternative: double-pole switch Alternative: switch with latching function: MSM LA CS 22 Alternative: Other diameter Alternative: switch with ring illumination: MSM LA 22; MSM 22 Alternative: Standard version Weblinks pdf data sheet, html datasheet, General Product Information, CAD- Drawings, Product News, Detailed request for product, Video

Metal Line SwitchesMSM CS 22 https://www.schurter.com /PG70 Switches Technical Data Electrical Data Switching Function momentary Number of Poles SPDT Supply Voltage 24 VDC Illumination area Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Contact Material Ag Switching Voltage max. 125/250 VAC Switching Current max. 5 / 3 A Rated Switching Capacity 750 W Lifetime 0.2 million actuations at Rated Swit- ching Capacity Contact Resistance < 30 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch 0,1 A / 30 VDC, IP40 Contact Material Au Switching Voltage max. 30 VDC Switching Current max. 0.1 A Rated Switching Capacity 3 W Lifetime 0.2 million actuations at Rated Swit- ching Capacity Contact Resistance < 50 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch for Electrical Rating 10 A / 250 VAC (Protection Class IP40) Contact Material Ag Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Contact Resistance < 30 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch 5 A / 250 VAC, IP67 Switching Voltage max. 250 VAC Switching Current max. 5 Rated Switching Capacity 1250 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 0,1 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 0.1 Rated Switching Capacity 25 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 10 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.01 million actuations at Rated Swit- ching Capacity Mechanical Data Actuating Force 4.5 N Actuating Travel 1.0 mm Lifetime 1.5 million actuations Shock Protection IK07 Mounting screw torque Plastic Nut max. 3.5 Nm Mounting screw torque Stain- less Steel Nut max. 16 Nm Climatical Data Operating Temperature -25 to 85 °C Storage Temperature -25 to 85 °C IP Protection Class IP65 Switching Unit IP40 IP67 optional Salt Spray Test (acc. to DIN 50021-SS) 24 h / 48 h / 96 h Residence Time Material Housing Stainless Steel Actuator Ceramic (Zirconium Dioxide) Seal Ring NBR70 Switcher Collet PA Plastic Nut PA, UL94 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER.

Metal Line Switches MSM CS 22https://www.schurter.com /PG70 Switches Product standards Product standards that are referenced Organization Design Standard Description Designed according to DIN EN 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 1054 UL standard for safety special-use switches Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Compliances The product complies with following Guide Lines Identification Details Initiator Description RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] MSM 22 CS ST NC B NO COM ø 18 C D E 0.52.8 36.95 ø 26 21.1 0.5 2.8 SW24 1.74 max. 6 ø 25 M22x1

Metal Line SwitchesMSM CS 22 https://www.schurter.com /PG70 Switches MSM 22 CS LE NC B NO COM ø 18 C D 0.5 E ø 26

21.1 M22x1

ø 25 SW24 2.8 36.95 1.74 max. 6 MSM 22 CS AI Single color NC NO COM SW24 2.8 0.5 ø 25M22x1 E max. 6 C D 2.8 ø 26 35.85 1.73 13.25 0.5 B ø 18

Metal Line Switches MSM CS 22https://www.schurter.com /PG70 Switches MSM 22 CS AI RGB NC NO COM SW24 2.8 0.5 ø 25M22x1 E max. 6 C D 2.8 ø 26 35.85 1.73 13.25 0.5 B ø 18 Legend B = Actuating Area C = Sealing D = Nut E = Anti-rotation protection L = Illuminated area Tolerance Range Actuator Tolerance Range 0.20 0.20 The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. Dimension MSM 22 CS ST Drilling diagram MSM 22 CS LE / MSM 22 CS BL Drilling diagram

Metal Line SwitchesMSM CS 22 https://www.schurter.com /PG70 Switches Assembly Instructions During assembly, the protruding bars of the holder should not be pressed together. I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the micro switch holder of the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch function. 2.) Insulate the terminals as required. Fully insulated plug-in sleeves are recommended. 3.) Installation instructions according to VDE-standard DIN VDE 0100-100 or alternatively IEC 60354 standard. Diagrams MSM CS ST / MSM CS LE MSM CS BL Single color MSM RI / 24 V RGB B G R terminal assignment with resistors for 24 VDC terminal- LED -pole ground (GND) terminal R LED +pole red LED terminal G LED +pole gr een LED terminal B LED +pole blue LED COM NO NC Lighting type Active Active Active Resulting terminal terminal terminal Color R) G) B) Singlecolor x Red Singlecolor x Green Singlecolor x Blue RGB Additive 2 x x Y ellow RGB Additive 2 x x Magenta RGB Additive 2 x x Cyan RGB Additive 3 x x x White Illumination options for RGB Marking The last three digits in the order number define the lettering:

000 No Lettering

001-074 Standard Lettering 101- Customized Lettering

Metal Line Switches MSM CS 22https://www.schurter.com /PG70 Switches Lettering Colour of Laser Lettering Material Lettering Colour Ceramic black Filled letters Order Index Lettering Laser Marking 001 =A 021 =U 041 =÷ 061 =EIN 002 =B 022 =V 042 = ✳ 062 =AUS 003 =C 023 =W 043 == 063 =AUF 004 =D 024 =X 044 = # 064 =AB 005 =E 025 =Y 045 = ↔ 065 =ON 006 =F 026 =Z 046 = ↕ 066 =OFF 007 =G 027 =0 047 = → 067 =UP 008 =H 028 =1 048 = ← 068 =DOWN 009 =I 029 =2 049 = ↓ 069 =HIGH 010 =J 030 =3 050 = ↑ 070 =LOW 011 =K 031 =4 051 = % 071 =ON/OFF 012 =L 032 =5 052 = √ 072 =START 013 =M 033 =6 053 =CTRL 073 =RESET 014 =N 034 =7 054 =RETURN 074 = 015 =O 035 =8 055 =SHIFT 075 = 016 =P 036 =9 056 =LOCK 076 = 017 =Q 037 =+ 057 =STOP 077 = 018 =R 038 =- 058 =ENTER 019 =S 039 =. 059 =BACK 020 =T 040 = x 060 =LINE Please note that the font size depends on the number of characters All Variants Diameter Switching Current Switching Voltage Illumination, LED Housing Ma- terial Torsion Protection Housing/Actuator Config. Code Order Number [mm] [A] [VAC/ VDC] 22 0.1 30 VDC non-illuminated Stainless Steel no / yes MSM 22 CS Pcs 1241.7031.1110000 22 5 / 3 125/250 VAC non-illuminated Stainless Steel no / yes MSM 22 CS Pcs 1241.7031.1120000 22 10 250 VAC non-illuminated Stainless Steel no / yes MSM 22 CS Pcs 1241.7031.1130000 22 5 / 3 125/250 VAC non-illuminated Stainless Steel yes / yes MSM 22 CS LE 1241.7032.1120000 22 0.1 30 VDC Backlighted, red, 24 VDC Stainless Steel yes / yes MSM 22 CS BL red 1241.8484 22 0.1 30 VDC Backlighted, green, 24 VDC Stainless Steel yes / yes MSM 22 CS BL green 1241.8485 █ 22 0.1 30 VDC Backlighted, blue, 24 VDC Stainless Steel yes / yes MSM 22 CS BL blue 1241.8487 22 0.1 30 VDC Backlighted, white, 24 VDC Stainless Steel yes / yes MSM 22 CS BL white 1241.8488 22 10 250 VAC Backlighted, red, 24 VDC Stainless Steel yes / yes MSM 22 CS BL red 1241.8520 22 10 250 VAC Backlighted, green, 24 VDC Stainless Steel yes / yes MSM 22 CS BL green 1241.8521 22 10 250 VAC Backlighted, blue, 24 VDC Stainless Steel yes / yes MSM 22 CS BL blue 1241.8523 22 10 250 VAC Backlighted, white, 24 VDC Stainless Steel yes / yes MSM 22 CS BL white 1241.8524 22 0.1 30 VDC Backlighted, RGB, 24 VDC Stainless Steel yes / yes MSM 22 CS BL RGB 3-102-774 22 5 / 3 125/250 VAC Backlighted, RGB, 24 VDC Stainless Steel yes / yes MSM 22 CS BL RGB 3-102-775

Metal Line SwitchesMSM CS 22 https://www.schurter.com /PG70 Switches Diameter Switching Current Switching Voltage Illumination, LED Housing Ma- terial Torsion Protection Housing/Actuator Config. Code Order Number [mm] [A] [VAC/ VDC] 22 10 250 VAC Backlighted, RGB, 24 VDC Stainless Steel yes / yes MSM 22 CS BL RGB 3-102-776 22 5 / 3 125/250 VAC Backlighted, blue, 24 VDC Stainless Steel yes / yes MSM 22 CS BL blue 3-120-106 22 5 / 3 125/250 VAC Backlighted, white, 24 VDC Stainless Steel yes / yes MSM 22 CS BL white 3-120-107 22 5 / 3 125/250 VAC Backlighted, red, 24 VDC Stainless Steel yes / yes MSM 22 CS BL red 3-120-119 22 5 / 3 125/250 VAC Backlighted, green, 24 VDC Stainless Steel yes / yes MSM 22 CS BL green 3-120-124 Legend: Type: MSMCS = Ceramic Surface ST = Standard: not lettered LE = Lettering: lettered AI = BL = Full Surface Backlighting: Lettering possible (see Lettering, last 3 digits) IP65 degree of protection front side contact areadegree of protection rear side contact area IP40 or IP67 optional -> see Technical Data Micro Switch Customer-specific versions available on request. Special materials for use in salt and chlorinated environment on request. The MOQ for standard laser lettering on standard variants is a packing unit. The nut with gasket and micro switch are enclosed in the box. █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 in box with insert - Actuating elements in ESD safe packaging - Screw nuts and sealing O-ring in a bag (enclosed in the box)

Metal Line Switches MSM CS 22https://www.schurter.com /PG70 Switches Accessories Protection cover for MSM 19 and MSM 22 Power Supply Power Supply IP42 for LED- and Illumination applications indoor 90~264 VAC => 24 VDC 0.34 A 8 W The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 05.01.2022