MSMCGLCE6.5A MICROSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

RF01002, Rev. C (1/4/13) ©2013 Microsemi Corporation Page 1 of 7 MSMCGLCE6.5A – MXLSMCGLCE170Ae3, MSMCJLCE6.5A – MXLSMCJLCE170Ae3 Available

1500 Watt Low Capacitance Surface

Mount Transient Voltage Suppressor Screening in reference to MIL-PRF-19500 available

DESCRIPTION

This high-reliability surface mount Transient Voltage Suppressor (TVS) product family includes a rectifier diode in series with and in the opposite direction to the primary TVS protection diode. The circuit being protected sees only the rectifier diode's low 100 pF capacitance. They are available in either a DO- 215AB (gull-wing) or DO-214AB (J-bend) package and RoHS compliant versions are available. The low capacitance of these TVS devices allows them to be applied to the protection of high-frequency signal and communication lines in inductive switching environments or systems exposed to the secondary effects of lightning per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. They also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel and opposite directions (anti-parallel) for complete ac protection ( figure 6). DO-215AB (SMCG) Package DO-214AB (SMCJ) Package NOTE: All SMC series are equivalent to prior SMM package identifications. Also available in: Commercial grade SMCG(J)LCE6.5 – SMCG(J)LCE170Ae3 Case 1 package (axial-leaded) MLCE6.5 – MLCE170Ae3 MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

  • Available in standoff voltage range of 6.5 to 170 V.
  • Low capacitance of 100 pF or less.
  • Molding compound flammability rating: UL94V-O.
  • Two different terminations available in C-bend (modified J-bend with DO-214AB) or Gull-wing (DO-215AB).
  • Screening available in reference to MIL-PRF-19500. Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening options. (See part nomenclature for all available options.)
  • RoHS compliant versions available. APPLICATIONS / BENEFITS
  • 1500 watts peak pulse power at 10/1000 µs.
  • Low capacitance for high frequency data line protection to 1 MHz.
  • Protection for aircraft fast data rate lines up to level 5 waveform 4 and level 2 waveform 5A in RTCA/DO-160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1).
  • IEC61000-4-2 ESD 15 kV (air), 8 kV (contact).
  • IEC61000-4-5 (lightning) as further detailed in LCE6.5 thru LCE170A data sheet.
  • T1/E1 line cards.
  • Base stations, WAN & XDSL interfaces.
  • CSU/DSU equipment.

RF01002, Rev. C (1/4/13) ©2013 Microsemi Corporation Page 2 of 7 MSMCGLCE6.5A – MXLSMCGLCE170Ae3, MSMCJLCE6.5A – MXLSMCJLCE170Ae3 MAXIMUM RATINGS @ 25 ºC unless otherwise stated Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature TJ and TSTG -65 to +150 ºC Thermal Resistance Junction-to-Lead (1) RӨJL 20 ºC/W Peak Pulse Power dissipation @ 25 ºC (at 10/1000 µs, see figures 1, 2, and 3) (2) PPP 1500 W Clamping Factor @ Full Rated Power @ 50 % Rated Power CF 1.4 1.30 tclamping (0 volts to V(BR) min.) tclamping < 5x10-9 s Rated Average Power Dissipation TL = +50 ºC PM(AV) 5.0 W Solder Temperature @ 10 s TSP 260 oC Notes: 1. Typical junction to lead (tab) at mounting plane. 2. With a repetition rate of 0.01% or less . When pulse testing, do not pulse in oppos ite direction (see “application schematics” section herein and figures 5 & 6 for further protection in both directions.) MECHANICAL and PACKAGING

  • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
  • TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable to MIL-STD-750, method 2026.
  • MARKING: Part number with abbreviated prefix (MCLC6.5A, MCLC6.5Ae3, MCLC33, MCLC33e3, etc.).
  • POLARITY: Cathode indicated by band.
  • TAPE & REEL option: Standard per EIA-481-B with 16 mm tape (add “TR” suffix to part number). Consult factory for quantities.
  • WEIGHT: Approximately 0.25 grams.
  • See Package Dimensions on last page. PART NOMENCLATURE M SM C G LC E 6.5 A e3 Reliability Level* M MA MX MXL *(see High Reliability Up-Screened Plastic Products Portfolio) Surface Mount Package

1500 W Power Level

G = Gull-wing J = J-bend RoHS Compliance e3 = RoHS Compliant Blank = non-RoHS Compliant +/-5%Tolerance Level Reverse Stand-Off Voltage (see Electrical Characteristics table) Encapsulated Plastic Package Low Capacitance

RF01002, Rev. C (1/4/13) ©2013 Microsemi Corporation Page 3 of 7 MSMCGLCE6.5A – MXLSMCGLCE170Ae3, MSMCJLCE6.5A – MXLSMCJLCE170Ae3 SYMBOLS & DEFINITIONS Symbol Definition I(BR) Breakdown Current: The current used for measuring breakdown voltage V(BR). ID Standby Current: The current at the rated standoff voltage VWM. IF Forward Current: The forward current dc value, no alternating component. IO Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. IPP Peak Impulse Current: The peak current during the impulse. PPP Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP. VC Clamping Voltage: The maximum clamping voltage at specified IPP (peak pulse current) at the specified pulse conditions. V(BR) Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. VWM Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as the standoff voltage. ELECTRICAL CHARACTERISTICS @ 25 ºC unless otherwise stated Part Number Reverse Stand-Off Voltage VWM Volts Breakdown Voltage V(BR) @ I(BR) Volts Maximum Reverse Leakage @VWM ID µA Maximum Clamping Voltage @IPP VC Volts Maximum Peak Pulse Current I PP @10/1000 Amps Maximum Capacitance @ 0 Volts, f = 1 MHz pF Working Inverse Blocking Voltage VWIB Volts Inverse Blocking Leakage Current IIB µA Peak Inverse Blocking Voltage VPIB Volts Gull-Wing J-Bend MIN MAX mA MSMCGLCE6.5A MSMCGLCE7.0A MSMCJLCE6.5A MSMCJLCE7.0A 6.5 7.0 7.22 7.78 7.98 8.60 1000 500 11.2 12.0 100 100 100 100 100 100 MSMCGLCE7.5A MSMCGLCE8.0A MSMCJLCE7.5A MSMCJLCE8.0A 7.5 8.0 8.33 8.89 10.2 9.83 250 100 12.9 13.6 100 100 100 100 100 100 MSMCGLCE8.5A MSMCGLCE9.0A MSMCJLCE8.5A MSMCJLCE9.0A 8.5 9.0 9.44 10.0 10.4 11.1 14.4 15.4 100 100 100 100 100 MSMCGLCE10A MSMCGLCE11A MSMCJLCE10A MSMCJLCE11A 11.1 12.2 12.3 13.5 17.0 18.2 100 100 100 100 MSMCGLCE12A MSMCGLCE13A MSMCJLCE12A MSMCJLCE13A 13.3 14.4 14.7 15.9 19.9 21.5 100 100 100 100 MSMCGLCE14A MSMCGLCE15A MSMCJLCE14A MSMCJLCE15A 15.6 16.7 17.2 18.5 23.2 24.4 100 100 100 100 MSMCGLCE16A MSMCGLCE17A MSMCJLCE16A MSMCJLCE17A 17.8 18.9 19.7 20.9 26.0 27.6 100 100 100 100 MSMCGLCE18A MSMCGLCE20A MSMCJLCE18A MSMCJLCE20A 20.0 22.2 22.1 24.5 29.2 32.4 100 100 100 100 MSMCGLCE22A MSMCGLCE24A MSMCJLCE22A MSMCJLCE24A 24.4 26.7 26.9 29.5 35.5 38.9 100 100 100 100 MSMCGLCE26A MSMCGLCE28A MSMCJLCE26A MSMCJLCE28A 28.9 31.1 31.9 34.4 42.1 45.5 100 100 100 100 MSMCGLCE30A MSMCGLCE33A MSMCJLCE30A MSMCJLCE33A 33.3 36.7 36.8 40.6 48.4 53.3 28.1 100 100 100 100 MSMCGLCE36A MSMCGLCE40A MSMCJLCE36A MSMCJLCE40A 40.0 44.4 44.2 49.1 58.1 64.5 25.8 23.3 100 100 100 100 MSMCGLCE43A MSMCGLCE45A MSMCJLCE43A MSMCJLCE45A 47.8 50.0 52.8 55.3 69.4 72.7 21.6 20.6 100 100 150 150 200 200 MSMCGLCE48A MSMCGLCE51A MSMCJLCE48A MSMCJLCE51A 53.3 56.7 58.9 62.7 77.4 82.4 19.4 18.2 100 100 150 150 200 200 MSMCGLCE54A MSMCGLCE58A MSMCJLCE54A MSMCJLCE58A 60.0 64.4 66.3 71.2 87.1 93.6 17.2 16.0 100 100 150 150 200 200 MSMCGLCE60A MSMCGLCE64A MSMCJLCE60A MSMCJLCE64A 66.7 71.1 73.7 78.6 96.8 103 15.5 14.6 150 150 200 200 MSMCGLCE70A MSMCGLCE75A MSMCJLCE70A MSMCJLCE75A 77.8 83.3 85.0 92.1 113 121 13.3 12.4 150 150 200 200 MSMCGLCE80A MSMCGLCE90A MSMCJLCE80A MSMCJLCE90A 88.7 100 98.0 111 129 146 11.6 10.3 150 300 200 200 MSMCGLCE100A MSMCGLCE110A MSMCJLCE100A MSMCJLCE110A 100 110 111 122 123 135 162 178 9.3 8.4 300 300 200 400 MSMCGLCE120A MSMCGLCE130A MSMCJLCE120A MSMCJLCE130A 120 130 133 144 147 159 193 209 7.8 7.2 300 300 400 400 MSMCGLCE150A MSMCGLCE160A MSMCJLCE150A MSMCJLCE160A 150 160 167 178 185 197 243 259 6.2 5.8 300 300 400 400 MSMCGLCE170A MSMCJLCE170A 170 189 209 1 5 275 5.4 90 300 10 400 NOTE 1: TVS are normally selected according to the reverse stando ff voltage” (VWM) which should be equal to or greater than the dc or peak operating voltage level.

RF01002, Rev. C (1/4/13) ©2013 Microsemi Corporation Page 6 of 7 MSMCGLCE6.5A – MXLSMCGLCE170Ae3, MSMCJLCE6.5A – MXLSMCJLCE170Ae3 PACKAGE DIMENSIONS NOTES: Dimension “E” exceeds the JEDEC outline as shown . NOTES: Dimension “E” exceeds the JEDEC outline in height as shown . Dimensions Ltr Inch Millimeters Min Max Min Max A .115 .121 2.92 3.07 B .260 .280 6.60 7.11 C .220 .245 5.59 6.22 E .077 .110 1.95 2.80 F .380 .400 9.65 10.16 K .025 .040 0.635 1.016 Dimensions Ltr Inch Millimeters Min Max Min Max A .115 .121 2.92 3.07 B .260 .280 6.60 7.11 C .220 .245 5.59 6.22 D .305 .320 7.75 8.13 E .077 .110 1.95 2.80 L .030 .060 .760 1.52 SMCJ (DO-214AB) SMCG (DO-215AB)

RF01002, Rev. C (1/4/13) ©2013 Microsemi Corporation Page 7 of 7 MSMCGLCE6.5A – MXLSMCGLCE170Ae3, MSMCJLCE6.5A – MXLSMCJLCE170Ae3 PAD LAYOUT SMCG (DO-215AB) Ltr Inch Millimeters A .510 12.95 B .110 2.79 C .150 3.81 SMCJ (DO-214AB) Ltr Inch Millimeters A .390 9.90 B .110 2.79 C .150 3.81