MSM19DPST SCHURTER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 1 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00 Product manual Vandal-proof MSM DP switch

Contents

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 2 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 3 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

1 PRODUCT DESCRIPTION

Both, the housing and the actuator of the vandal-proof MSM DP switch are made of high-quality stainless steel. By applying this robust and weather-re sistant material, the switch is particularly suitable for the use in harsh environments. Furthermore, the switch can be used in applications where an additional second contact is required for a safety circuit. The MSM DP is available with mounting diameters of 19, 22 and 30 mm. The switch is equipped with two separated switching contacts which are available as normally open, normally closed or as change-over. Different types of contact cover a range of permissible switching voltages from 30 VDC to 250 VAC, switching currents are permissible from 0.1 to 10 Ampere. The MSM DP is equipped with flat-pin plugs to permit fast connection. The cables are plugged onto the micro switch which is subsequently plugged onto the previously screwed-in switch. Point and ring- illuminated versions are available for applications at night or as an optical status display.

2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS

2.1 Technical Data

Micro Switch for Electrical Rating (Protection Class IP 40) 0.1 A

30 VDC

125 VAC

250 VAC

Contact Material gold silver silver Switching Voltage max. (VAC) (VDC) 250 Switching Current max. (A) 0.1 5 / 3 10 Rated Braking Capacity (W) 3 1250 2500 Lifetime 1) (at Rated Braking Capacity) 200,000 200,000 50,000 Lifetime (160mA at 48VDC) 1,500,000 Initial Contact Resistance, new (mΩ) < 50 < 30 < 30 Insulation Resistance (IEC 512-2) (M Ω) > 100 > 100 > 100 Contact Bounce Time (ms) < 5 < 5 < 5 1) The electrical lifetime according to ENEC or UL ap probation can vary, depending on the corresponding micro switch, under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in “point 6 approvals”.

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 4 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00 Micro Switch for Electrical Rating (Protection Class IP 67) 0.1 A Switching Voltage max. (VAC) 250 250 250 Switching Current max. (A) 0.1 5 10 Rated Braking Capacity (W) 25 1500 2500 Lifetime 1) (at Rated Braking Capacity) 50,000 50,000 10,000 ¾ Italically written types on request 1) The electrical lifetime according to ENEC or UL ap probation can vary, depending on the corresponding micro switch, under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in “point 6 approvals”. Mechanical Data Actuating Force (N) 5.0 Actuating Travel Mounting Diameter 19, 22 mm (mm) 1.0 Actuating Travel Mounting Diameter 30 mm (mm) 1.2 Lifetime (Actuations) 1,500,000 Shock Resistance DIN EN 50102 (IK) 07 Climatical Data Operating/Storage Temperature (°C) - 25 to + 85 Degree of Protection Front Side mechanical* (IP) 40 Degree of Protection Front Side Contact Area (IP) 67 Degree of Protection Rear Side Contact Area (IP) 40 / 67 Ring Illumination Supply Voltage Ring Illumination (VDC) 24 ¾ Other supply voltages on request *The degree of protection refers to the area of the movable actuator.

D – 79346 Endingen www.schurter.com Point Illumination Attention: Parts are delivered without series resistor. Characteristics red LED Point Illumination Forward Current max. 40 mA Forward Voltage at 10 mA = 2.0 VDC Forward Voltage max. = 2.5 VDC Characteristics green LED Point Illumination Forward Current max. 40 mA Forward Voltage at 10 mA = 2.0 VDC Forward Voltage max. = 2.5 VDC Characteristics blue LED Point Illumination Forward Current max. 20 mA Forward Voltage at 10 mA = 3.2 VDC Forward Voltage max. = 3.7 VDC Recommendation of series resistors for Point Illumination: Material Component Material Housing Stainless Steel Actuator Stainless Steel Light Conductor (Point Illumination) PC Illuminated Ring (Ring Illumination) PA Gasket NBR70 Switcher Collet PA Intermediate Connector non-illuminated PA Intermediate Connector illuminated PA Switcher Adapter PA Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 5 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.2 Component dimensions

2.2.1 Component dimensions MSM 19 DP

22ø 2,80 39,15 ø15,80 0,50 M 1,75 x0,75 22,80 mmmax. 6 10,50 C 18,15-0,05 NO NCCOM 39,15 ø 2,80 10,50 mm 0,50 x0,75M 22,80 max. 6 1,75 C ø15,80 MSM 19 DP PI MSM 19 DP RI 18,15-0,05 NO NC COM A ø15,80 mm 25,80 0,50 1,75 M19x0,75 max. 6 10,50 C 2,80 ø 39,15 18,15-0,05 COMNC NO A ø15,70 ø10,66 ø22 39,15 2,80 C M 1,75 25,80 mm x0,75 10,50 max. 6 0,50 Legend

  • A = Illumination Area
  • B = Actuating Area
  • C = Width Across Flats
  • D = Knurled Nut Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 6 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.2.2 Component dimensions MSM 22 DP

ø25 2,80 39,15 18ø ø27,60 D 0,50 22,80 mm 1,7522M max. 5 13,50 21,10-0,05 COM NO NC 2,80 ø 39,15 18ø ø27,60 D mm 0,50 22M 1,75 22,80 max. 5 13,50 MSM 22 DP PI MSM 22 DP RI 21,10-0,05 NO NC COM mm5 0,50 13,50 25,80 1,75 max. M22x1ø25 2,80 39,15 A 18ø ø ø27,60 D 21,10-0,05 COM NO NC ø 39,15 2,80 A 10,66 17,90ø ø ø27,60 D 13,50 25,80 0,50 x1M mmmax. 5 1,75 Legend

  • A = Illumination Area
  • B = Actuating Area
  • C = Width Across Flats
  • D = Knurled Nut Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 7 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.2.3 Component dimensions MSM 30 DP

  • A = Illumination Area
  • B = Actuating Area
  • C = Width Across Flats
  • D = Knurled Nut Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 8 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.3 Actuator Tolerance Range

The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 9 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.4 Hole dimensions

MSM 19 ST / MSM 19 RI MSM 19 LE/ MSM 19 PI / MSM 19 RI optional MSM 22 ST / MSM 22 RI MSM 22 LE/ MSM 22 PI / MSM 22 RI optional MSM 30 ST / MSM 30 RI MSM 30 LE / MSM 30 PI / MSM 30 RI optional Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 10 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com

2.5 Starting Torque

Plastic Nut max. (Nm) Stainless Steel Nut * max. (Nm) MSM 19 4.5 12 MSM 22 3.5 16 MSM 30 8 50 ¾ * on request

2.6 Switching Symbols

MSM ST / MSM LE MSM PI MSM RI NO NCCOM COM NO NC NO NCCOM COM NO NC Rv NCCOM COM NO NC Rv D3 D4 NO

2.7 Accessories

MSM 22 Installation wrench Order number: 1141.1337 Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 11 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 12 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

3 ORDER NUMBERS

3.1 Order numbers MSM with micro switches of protection class IP40 (double-pole)

Mounting Diameter (mm) Ø 19 Ø 22 Ø 30 Electrical Rating max. 5 A / 125 VAC or 3 A / 250 VAC Installation Wrench 1141.1337 ¾ Italically written types on request ¾ At a minimum order quantity of 100 pieces the ring illuminated version with lettering is available on request. Additional switch types with the following electrical ratings are available on request: 0.1 A@30VDC, 10A@250VAC and also 5A@250VAC with IP67 protection class. For these customized versions a minimum order quantity of 100 pieces has to be fulfilled. For other types of the MSM product family, please visit: http://www.schurter.de/wwwsc/con_pg70.asp?language_id=10

D – 79346 Endingen www.schurter.com

3.2 Lettering

The last three digits in the order number define the lettering.

000 No Lettering

001-072 Standard Lettering 101- Customized Lettering Example for ordering with lettering Basic Version 1241.6611.1120XXX Symbols 001-072 Ordering Indices for Lettering Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 13 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00 001= A 016= P 031= 4 046= 061= EIN 002= B 017= Q 032= 5 047= → 062= AUS 003= C 018= R 033= 6 048= ← 063= AUF 004= D 019= S 034= 7 049= ↓ 064= AB 005= E 020= T 035= 8 050= ↑ 065= ON 006= F 021= U 036= 9 051= % 066= OFF 007= G 022= V 037= + 052= √ 067= UP 008= H 023= W 038= − 053= CTRL 068= DOWN 009= I 024= X 039= . 054= RETURN 069= HIGH 010= J 025= Y 040= × 055= SHIFT 070= LOW 011= K 026= Z 041= ÷ 056= LOCK 071= ON/OFF 012= L 027= 0 042= ∗ 057= STOP 072= START 013= M 028= 1 043= = 058= ENTER 014= N 029= 2 044= # 059= BACK 015= O 030= 3 045= ↔ 060= LINE

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 14 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00 Lettering Size MSM 19 LE / MSM 19 PI : Single characters: height 8 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters height 3 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 2.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 8 mm, font: True Type, Symbol MSM 22 LE / MSM 22 PI : Single characters: height 8 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters height 3 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 2.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 8 mm, font: True Type, Symbol MSM 30 LE / MSM 30 PI : Single characters: height 12 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters: height 7 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 3.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 12 mm, font: True Type, Symbol MSM 19 RI * / MSM 22 RI *: Single characters: height 5 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters height 3 mm, font: Helvetica normal DIN1451-1E Symbols (indices 037-052): capitals height 5 mm, font: True Type, Symbol MSM 30 RI *: Single characters: height 8 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters: height 3 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 2.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 8 mm, font: True Type, Symbol ¾ * At a minimum order quantity of 100 pieces the ring illuminated version with lettering is available on request.

D – 79346 Endingen www.schurter.com

4 PACKAGING

MSM 19 10 pieces per box with inlay MSM 22 10 pieces per box with inlay MSM 30 1 piece in air cushion bag 10 pieces per box The nuts with gaskets and corresponding micro switches are packed separately and enclosed in the box. Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 15 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 16 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00

5 QUALIFICATION TEST

5.1 IP Protection Class

IP Protection Class IEC/DIN/EN/ 60529 IP 67

5.2 IK Protection Class

IK Protection Class DIN EN 50102 IK 07

5.3 ESD Protection

ESD-Test according to DIN 61000-4-2: 4kV Contact Discharge MSM DP ST Ø 19; 22; 30 mm 4kV Contact Discharge MSM DP LE Ø 19; 22; 30 mm

5.4 Salt Spray Test

Salt spray test according to DIN 50021- SS 24h, 48h and 96h residence time The surface of the stainless steel material is covered with a molecular-passive layer. Only under very unfavourable conditions it is possible, that iron and rust molecules as well as base metals penetrate the passive layer as foreign substances (pollutions) and initiate the rust process. The smoothness of the actuator was not affected. After the residence time the tested samples were cleaned under running water and all rust spots could be removed.

D – 79346 Endingen www.schurter.com Changes that contribute to technical improvement are subject to alternations

6 APPROVALS

The listed approvals only refer to the micro switch and not to the complete switch. Micro switch: Type Licence number ENEC VDE / KEMA UL 1054 CSA C22.2 NO55 1050.1151 097550 DIN EN 61058 E41791 1050.1102 097550 DIN EN 61058 E41791 1050.1103 097550 DIN EN 61058 E41791 SS-01 T 40008425 DIN EN 61058 E41515 SS-5 T 129246 DIN EN 61058 E41515 SS-10 T 125256 DIN EN 61058 E41515 DC3GL1AA 2089323.01 DIN EN 61058 E23301 DC1GL1AA 2089323.01 DIN EN 61058 E23301 DC2GL1AA 2089323.01 DIN EN 61058 E23301

7 ROHS COMPLIANT

All articles are ROHS-compliant. Seite Erstelldatum: Ersteller: Änderungsdatum: G eändert von: Ä nderungs-Nr. Datenblatt Nr. Index 17 of 17 07.03.2008 Schillak Schöchlin 9701 105.9534 a Print date: 28/03/2008 08:31:00