MSK5000 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

FEATURES: Dual Low Dropout Voltage Internal Short Circuit Current Limit Output Voltages Are Internally Set To ±1% Max Electrically Isolated Case Internal Thermal Overload Protection Many Output Voltage Combinations Alternate Package and Lead Form Configurations Available Equivalent Rad Hard Device MSK5930RH Series High Efficiency Linear Regulators Constant Voltage/Current Regulators System Power Supplies Switching Power Supply Post Regulators TYPICAL APPLICATIONS PIN-OUT INFORMATION +VIN +VOUT GND -VIN -VOUT 5000 SERIES DUAL POSITIVE/NEGATIVE,

3 AMP, LOW DROPOUT

DESCRIPTION: The MSK5000 Series offers low dropout voltages on both the positive and negative regulators. This, combined with the low θJC, allows increased output current while providing exceptional device efficiency. Because of the increased efficiency, a small hermetic 5 pin package can be used providing maximum performance while occupying minimal board space. Output voltages are internally trimmed to ±1% maximum resulting in consistent and accurate operation. Additionally, both regulators offer internal short circuit current and thermal limiting, which allows circuit protection and eliminates the need for external components and excessive derating. EQUIVALENT SCHEMATIC MIL-PRF-38534 AND 38535 CERTIFIED FACILITY 8548-81 Rev. K 2/15 CASE=ISOLATED

IOUT=0A; VIN=VOUT+3V 0A≤IOUT≤3A; ∆VOUT=50mV 100mA≤IOUT≤3A VIN=VOUT+3V IOUT=0A (VOUT+3V)≤VIN≤(VOUT+15V) VIN=VOUT+3V; IOUT=0A VIN=VOUT+5V IOUT=3A; COUT=25µF; f=120Hz JUNCTION TO CASE @ Tc=125°C IOUT=0A; VIN=VOUT+3V 0A≤IOUT≤3A; ∆VOUT=50mV VIN=VOUT+3V 100mA≤IOUT≤3A IOUT=0A (VOUT+3V)≤VIN≤(VOUT+15V) VIN=VOUT+3V; IOUT=0A VIN=VOUT+5V IOUT=3A; COUT=25µF; f=120Hz JUNCTION TO CASE @ Tc=125°C PART NUMBER POSITIVE OUTPUT REGULATORS: Output Voltage Tolerance Dropout Voltage Load Regulation Line Regulation Quiescent Current Short Circuit Current Ripple Rejection Thermal Resistance NEGATIVE OUTPUT REGULATORS: Output Voltage Tolerance Dropout Voltage Load Regulation Line Regulation Quiescent Current Short Circuit Current Ripple Rejection Thermal Resistance Max. 1.0 2.0 1.5 0.5 .75 4.5 1.0 2.0 1.2 .75 4.7 Storage Temperature Range Lead Temperature Range (10 Seconds) Case Operating Temperature MSK5000-5009 MSK5000B-5009B ESD Rating -65°C to +150°C 300°C -40°C to +85°C -55°C to +125°C Class 2 ABSOLUTE MAXIMUM RATINGS TST TLD TC Outputs are decoupled to ground using 33µF minimum low ESR capacitors unless otherwise specified. Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only. All output parameters are tested using a low duty cycle pulse to maintain TJ = TC. Industrial devices shall be tested to subgroup 1 unless otherwise specified. Military grade devices ("H" suffix) shall be 100% tested to subgroups 1,2 and 3. Subgroup 1 TA=TC=+25°C Subgroup 2 TA=TC=+125°C Subgroup 3 TA=TC=-55°C Please consult the factory if alternate output voltages are required. Input voltage (VIN=VOUT + a specified voltage) is implied to be more negative than VOUT. Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle. Internal solder reflow temperature is 180°C, do not exceed. Min. 3.0 3.0 Group A Subgroup 2,3 2,3 2,3 1,2,3 2,3 2,3 2,3 1,2,3 Min. 3.2 3.0 Typ. 0.1 0.1 1.3 0.2 0.3 0.1 0.2 4.3 0.1 0.1 0.8 0.2 0.3 4.5 3.5 4.5 Typ. 0.1 1.3 0.2 0.1 4.3 0.1 0.8 0.2 4.5 3.5 4.5 Max. 2.0 1.6 0.6 4.6 2.0 1.3 4.8 Parameter ELECTRICAL SPECIFICATIONS Test Conditions Units MSK5000 SERIESMSK5000B SERIES V mA A dB °C/W V mA A dB °C/W +3.3V +5.0V +5.0V +12.0V +12.0V +15.0V +15.0V +5.0V +5.0V +10.0V MSK5000 MSK5001 MSK5002 MSK5003 MSK5004 MSK5005 MSK5006 MSK5007 MSK5008 MSK5009 -5.2V -5.0V -5.2V -5.0V -12.0V -15.0V -5.0V -12.0V -15.0V -10.0V OUTPUT VOLTAGES POSITIVE NEGATIVE NOTES: ±30V Internally Limited ±3A +150°C Input Voltage (WRT VOUT) Power Dissipation Output Current Junction Temperature ±VIN PD IOUT TJ 8548-81 Rev. K 2/15

TYPICAL PERFORMANCE CURVES 4 8548-81 Rev. K 2/15

ORDERING INFORMATION

S= STRAIGHT; U= BENT UP; D= BENT DOWN PACKAGE STYLE T= TOP TAB SCREENING BLANK=INDUSTRIAL; B=MIL-PRF-38534 CLASS H GENERAL PART NUMBER (VOLTAGE) MSK5000 B T U THE ABOVE EXAMPLE IS A +3.3V, -5.2V MILITARY REGULATOR USING THE TOP TAB PACKAGE WITH LEADS BENT UP. WEIGHT=7.7 GRAMS TYPICAL ESD TRIANGLE INDICATES PIN 1 ALL DIMENSIONS ARE SPECIFIED IN INCHES 8548-81 Rev. K 2/15

S= STRAIGHT; U= BENT UP; D= BENT DOWN PACKAGE STYLE Z= Z PACK SCREENING BLANK=INDUSTRIAL; B=MIL-PRF-38534 CLASS H GENERAL PART NUMBER (VOLTAGE) MSK5000 B Z U WEIGHT=7.5 GRAMS TYPICAL ESD TRIANGLE INDICATES PIN 1 ALL DIMENSIONS ARE SPECIFIED IN INCHES MECHANICAL SPECIFICATIONS CONT'D 8548-81 Rev. K 2/15

www.anaren.com/msk The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent revision of this datasheet.

REVISION HISTORY

8548-81 Rev. K 2/15