MSH4024D-L SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • L oad Support – Load support parallels the inverter output with incoming AC sources allowing it to run larger loads from smaller generators.
  • B attery Profile Presets – Using the ME-RC-L or ME-ARC-L Remote Controls, easily choose from and set standard battery profiles, including Lithium Iron Phosphate (LFP), Gel, Flooded, AGM1, and AGM2. D ual AC inputs – The MSH4024D-L comes with two 60 amp AC inputs – a grid input at 60A and a generator input at 60A.
  • P ure sine wave – Power your T.V.s, stereos, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provides clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. A ccessible design – The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be. I nterchangeable – The MSH4024D-L is interchangeable with the Magnum MS Series and uses the same accessories as the MS Series. M ultiple ports – The MSH4024D-L provides multiple ports, including an RS485 communication port for network expansion, and a remote port. C onvenient switches – The MSH4024D-L comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • B uy with ease – The MSH4024D-L is backed by a three-year (36-month) limited warranty. Introduction The MSH4024D-L inverter/charger from Sensata Technologies – a pure sine wave inverter designed with true hybrid technology allowing it to run larger loads from smaller generators. Most inverters only use one source of energy to power loads, either from incoming AC power – shore or AC generator – or from the batteries. The MSH4024D-L combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply by itself. Model Numbers
  • M SH4024D-L Available For
  • Ma rine Systems R V Systems Available Accessories
  • A uto Generator Start - ME-AGS-N B attery Monitor Kit
  • C onduit Box
  • D C Load Disconnect
  • F use Blocks
  • M agWeb
  • R emote - ME-ARC-L
  • R emote - ME-RC-L
  • R emote Switch Adapter
  • R VC Bridge - ME-RVC-L
  • S mart Battery Combiner Pure Sine Wave 24 4000 VA Battery Voltage Options Continuous Output Options

Copyright © 2022 Sensata Technologies, Inc. sensata.com SPECIFICATIONS MSH4024D-L INVERTER SPECIFICATIONS Input battery voltage range 18 - 34 VDC Nominal AC output voltage 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.05 Hz Total Harmonic Distortion (THD) < 5% 1 msec surge current (amps AC) 120 100 msec surge current (amps AC) 82 5 sec surge power (real watts) 5800 30 sec surge power (real watts) 5400 5 min surge power (real watts) 4900 30 min surge power (real watts) 4500 Continuous power output at 25° C 4000 VA Maximum continuous input current 267 ADC Inverter efficiency (peak) 93.7% Transfer time < 16 msecs Search mode (typical) < 7 watts No load (120 VAC output, typical) 25 watts Waveform Pure Sine Wave CHARGER SPECIFICATIONS Continuous output at 25° C

110 ADC

Charger efficiency 85% Power factor > .95 Input current at rated output (AC amps) 29 GENERAL FEATURES AND CAPABILITIES Transfer relay capability

60 AAC maximum each input

Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation Standard with available temp sensor connected (battery temp 0 - 50 °C) Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes on transformer, MOSFETS, and battery Corrosion protection Yes, PCB’s conformal coated, powder coated chassis/top, and stainless steel fasteners Dual AC branch rated output breakers No Listings ETL listed to UL/cUL 458, CSA C22.2 No. 107.1-01 Warranty Three years parts and labor

Rev: 09/21/2022 P art#64-0504 vA Copyright © 2022 Sensata Technologies, Inc. sensata.com ENVIRONMENTAL SPECIFICATIONS Temperature (Operating/Non-operating) -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non-condensing PHYSICAL SPECIFICATIONS Dimensions (l x w x h) Shipping dimensions (l x w x h) 19” x 17” x 13” (48.3 cm x 43.2 cm x 33 cm) Mounting Shelf or wall (vents not allowed to face downward unless ME-CB or MMP is installed) Weight 58 lb (26.3 kg) Shipping weight 63 lb (28.6 kg) Max operating altitude 15,000’ (4570 m) AGENCY APPROVALS & CERTIFICATIONS

  • E TL listed to UL/cUL 458, CSA C22.2 No. 107.1-01 Testing for specifications at 25° C. Specifications subject to change without notice. GENERAL NOTES Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA CONTACT US Regional head offices: United States of America Sensata Technologies Attleboro, MA Phone: 508-236-3800 mail: support@sensata.com Netherlands Sensata Technologies Holland B.V. Hengelo Phone: +31 74 357 8000 mail: support@sensata.com China Sensata Technologies China Co., Ltd. Shanghai Phone: +8621 2306 1500 E-mail:support@sensata.com