MSDEU02-HI MINMAX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

DC/DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:1 Page 1 of 4

FEATURES

►Industrial SMD Package ►Ultra-high I/O Isolation 8000VDC with Reinforced Insulation ►Common Mode Transient Immunity:15KV/μs ►Qualified for IGBT and High Isolation Applications ►Operating Temp. Range -25°C to +80°C ►Tape & Reel Package Available ►UL/cUL/IEC/EN 60950-1 Safety Approval PRODUCT OVERVIEW The MINMAX MSDEU02-HI series is a new range of isolated 2W DC/DC converter modules in SMD package which feature a Ultra-high I/O-isolation voltage rated for 8000VDC with reinforced insulation. A very high common mode transient immunity with 15KV/μs qualifies these product for IGBT driver applications.There are 15 Models available for 5, 12, and 24VDC input. These converters offer a cost-effective solution for wind turbine, solar panel, transporation systems, industrial control equipments and some IGBT driver applications where a very high I/O-isolation is required. Model Selection Guide Model Number Input Voltage (Range) Output Voltage Output Current Input Current Load Regulation Max. capacitive Load Efficiency (typ.) Max. Min. @Max. Load @No Load @Max. Load VDC VDC mA mA mA(typ.) mA(typ.) % (max.) μF % MSDEU02-05S05HI (4.5 ~ 5.5) 5 400 8 615 330 MSDEU02-05S12HI 12 165 3 609 10 65 MSDEU02-05S15HI 15 133 2.5 605 10 66 MSDEU02-05D12HI ±12 ±83 ±1.5 553 10 100# 72 MSDEU02-05D15HI ±15 ±66 ±1 542 10 73 MSDEU02-12S05HI (10.8 ~ 13.2) 5 400 8 256 330 MSDEU02-12S12HI 12 165 3 254 10 65 MSDEU02-12S15HI 15 133 2.5 252 10 66 MSDEU02-12D12HI ±12 ±83 ±1.5 224 10 100# 74 MSDEU02-12D15HI ±15 ±66 ±1 220 10 75 MSDEU02-24S05HI (21.6 ~ 26.4) 5 400 8 128 330 MSDEU02-24S12HI 12 165 3 127 10 65 MSDEU02-24S15HI 15 133 2.5 126 10 66 MSDEU02-24D12HI ±12 ±83 ±1.5 112 10 100# 74 MSDEU02-24D15HI ±15 ±66 ±1 110 10 75 # For each output Input Specifications Parameter Model Min. Typ. Max. Unit Input Voltage Range 5V Input Models 4.5 5 5.5 VDC 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 Input Surge Voltage (1 sec. max.) 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 Input Filter All Models Internal Capacitor Type

DC/DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:1 Page 2 of 4 Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- ±2.0 ±4.0 % Output Voltage Balance Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation Vin=Min. to Max. @Full Load --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise 0-20 MHz Bandwidth --- --- 150 mV P-P Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. Automatic Recovery Isolation, Safety Standards Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage Rated for 60 seconds 4000 --- --- VACrms Tested for 1 second 8000 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- GΩ I/O Isolation Capacitance 100KHz, 1V --- 15 20 pF Common Mode Transient Immunity 15 --- --- KV/μs Safety Approvals UL/cUL 60950-1 recognition(UL certificate), IEC/EN 60950-1(CB-report) General Specifications Parameter Conditions Min. Typ. Max. Unit Switching Frequency 50 80 100 KHz MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 2,000,000 --- --- Hours Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 Level 2 Environmental Specifications Parameter Conditions Min. Max. Unit Operating Ambient Temperature Range (See Power Derating Curve) Natural Convection -25 +80 ℃ Case Temperature --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Natural Convection Lead-free reflow solder process IPC/JEDEC J-STD-020D.1 Power Derating Curve Ambient Temperature Output Power (%) 100 -25 0 20 60 100 1108040 400LFM 200LFM 100LFM Natural convection 20LFM C

DC/DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:1 Page 3 of 4 Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 It is not recommended to use water-washing process on SMT units. 7 Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Connecting Pin Patterns ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) Pin Connections Physical Characteristics 1 -Vin -Vin

7 NC NC Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated)

8 NC Common

9 +Vout +Vout Pin Material : Phosphor bronze 10 -Vout -Vout 16 +Vin +Vin Weight : 3.75g NC: No Connection 0~ 4 0.15 S 9.25 0.5 [0.36 0.02] 24.0 [0.94] 13.7 [0.54] 18.1 [0.71] 15.24 [0.6] [0.1][0.12] 2.543.11 1.00 [0.04] 1 7 8 10 916 S SEATING PLANE 1.6 [0.06] 17.78 [0.70] 2.9 16.6 [0.65] 13.7 [0.54] 19.5 [0.77] 2.54 [0.10] [0.11]

DC/DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886 -6-2923149 E -mail: sales@minmax.com.tw 2015/05/22 REV:1 Page 4 of 4 Minmax Technology Co., Ltd. Test Setup Peak-to-Peak Output Noise Measurement Test Use a Cout 0.47μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Out -Out +Vin -Vin Single Output DC / DC Converter Resistive LoadScope Copper Strip Cout Copper Strip +Out -Out +Vin -Vin Dual Output DC / DC Converter Resistive Load Scope Copper Strip Cout Com. ScopeCout Copper Strip Copper Strip Technical Notes Maximum Capacitive Load The MSDEU02-HI series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. For optimum performance we recommend 100μF maximum capacitive load for dual outputs and 330μF capacitive load for single outputs. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < +Out -Out +Vin -Vin DC / DC Converter LoadDC Power Source Cin Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 3.3μF capacitors at the output. +Out -Out +Vin -Vin Load DC Power Source Cout Single Output DC / DC Converter +Out -Out +Vin -Vin Load DC Power Source CoutCom. Dual Output DC / DC Converter Load Cout Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from measurements obtained in a test setup. DUT Position of air velocity probe and thermocouple 50mm / 2in Air Flow 15mm / 0.6in