MSBR35 HY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

  • Low forward voltage drop
  • High current capability RoHS
  • High reliability COMPLIANT
  • Meet UL flammability classification 94V-0 Mechanical Data
  • Case: Epoxy case with heat sink
  • Polarity: Symbol marked on body
  • Mounting position:
  • Bolt pass through the mounting hole of body then fix to heat sink
  • Mounting torque: 2 N.m Note: Products with logo or are made by HY Electronic (Cayman) Limited.

Applications

  • For use in high power supply inverters,servo motor and welding machine applications Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 1200 1400 1600 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 840 980 1120 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 1200 1400 1600 V Peak Non-Repetitive Reverse Voltage VRSM 75 150 275 500 725 900 1100 1300 1500 1700 V Maximum Average Forward Rectified Current @TC=60 ℃ I(AV) A Peak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t<8.3mS) I2 t A2S Peak Forward Voltage per Diode at 17.5A DC VF V Maximum DC Reverse Current at Rated @TJ=25℃ μA DC Blocking Voltage per Diode @TJ=125℃ mA Typical Thermal Resistance Junction to Case per Diode RθJC ℃/W Typical Thermal Resistance Case to Heatsink per Diode RθCS ℃/W RMS lsolation Voltage from Case to Lead VISO V Operating Junction Temperature Range TJ ℃ Storage Temperature Range TSTG ℃ Note: The typical data above is for reference only . MSBR35*-B-00-00 Rev. 11, 18-May-2020 2500 -55 to +150 -55 to +150 1.16 0.2 1030 1.2 IR 5.0 IFSM 500 A MSBR 3512 MSBR 3514 MSBR

3516 UnitMSBR

3510 Characteristics Symbol MSBR

Package Outline Dimensions in Inches (Millimeters) MSBR35 SERIES Silicon Passivated 3 Phase Bridge Rectifiers Reverse Voltage 50- 1600 Volts Forward Current - 35 Amperes Pb www.hygroup.com.tw All d ata sheet.com

Rating and Characteristic Curves The curve above is for reference only. MSBR35*-B-00-00 Rev. 11, 18-May-2020 MSBR35 SERIES 110 130 150 0 5 10 15 20 25 30 35 40 Fig. 1 - Current Rating Characteristics M aximum Allowable Case Temperature(℃) Tot al Output Current(A) 120°C （RECT） 0 5 10 15 20 25 30 35 Fig. 3 - Total Powper Loss Characteristics M aximum Total Power Loss (W) To tal Output Current(A) 0 25 50 75 100 125 150 Fig. 4 - Toltal Powper Loss Characteristics M aximum Total Power Loss (W) M aximum Allowable Ambient Temperature(A) 10K/W 7K/W 5K/W 4K/W 3K/W 2K/W 1K/W Rthsa=0.7KW-Data R 100 150 200 250 300 350 400 450 1 10 100 Fig. 5 - Maximum Non-repetitive Surge Current P eak Half Sine-wave Forward Current (A) Number of Equal Amplitude Half Cycle Current Pulse (N) @ 60HZ @ 50HZ 100 150 200 250 300 350 400 450 500 0.01 0.1 1 Fig. 6 - Maximum Non-repetitive Surge Current P eak Half Sine-wave Forward Current (A) Pluse Train Duration (S) NO VOLTAGE REAPPLIED RATED VRRM REAPPLIED 0.1 TJ=25°C TJ=75°C TJ=100°C TJ=125°C Pulse Width 300uS 2%Duty Cycle Fig. 2 - Typical Forward Characteristics I nstantaneous Forward Current (A) Instantaneous Forward Voltage (V) At Any Rated Lode Condition and with Rated Applied Following Surge Current TJ=150°C At Any Rated Lode Condition and with Rated Applied Following Surge Current TJ=150°C All d ata sheet.com

The curve above is for reference only. MSBR35*-B-00-00 Rev. 11, 18-May-2020 Rating and Characteristic Curves MSBR35 SERIES 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 Fig. 7 - Thermal Impedance Zthjc Tr ansient Thermal Impedance Zthjc (K/W) Square Wave Pulse Duration (S) All d ata sheet.com

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require- ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi- lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet- ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers- onnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of HY. Product names and markings noted herein may be trademarks of their respective owners. Rev. 11, 18-May-2020 Disclaimer All d ata sheet.com