MSAU200_15 MINMAX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

DC/DC CONVERTER 1W, SMD-Package E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/07/31 REV:8 Page 1 of 4

FEATURES

►Industrial SMD Package ►I/O Isolation 1000 VDC ►Operating Ambient Temp. Range -40°C to +90°C ►Water-washable Process Available ►Qualified for Lead-free Reflow Solder Process According to IPC/JEDEC J-STD-020D.1 ►Tape & Reel Package Available PRODUCT OVERVIEW The MINMAX MSAU200 series is a range of 1W DC/DC converters in a SMD- Package featuring I/O-isolation of 1000VDC.The small footprint makes this product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, in digital interfaces or where a converted voltage is required. An excellent efficiency allows an operating temperature range of–40°C to +90°C. These converters are fully qualified for the higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can also be supplied in tape& reel package. Model Selection Guide Model Number Input Voltage (Range) Output Voltage Output Current Input Current Load Regulation Max. capacitive Load Efficiency (typ.) Max. Min. @Max. Load @No Load @Max. Load VDC VDC mA mA mA(typ.) mA(typ.) % (max.) μF % MSAU201 (4.5 ~ 5.5) ±5 ±100 ±2 267 MSAU202 ±9 ±55 ±1 260 10 76 MSAU203 ±12 ±42 ±0.8 255 8 79 MSAU204 ±15 ±33 ±0.7 251 7 79 MSAU211 (10.8 ~ 13.2) ±5 ±100 ±2 111 MSAU212 ±9 ±55 ±1 109 8 76 MSAU213 ±12 ±42 ±0.8 105 5 80 MSAU214 ±15 ±33 ±0.7 103 5 80 MSAU221 (21.6 ~ 26.4) ±5 ±100 ±2 56 MSAU222 ±9 ±55 ±1 55 8 75 MSAU223 ±12 ±42 ±0.8 53 5 79 MSAU224 ±15 ±33 ±0.7 52 5 79 Input Specifications Parameter Model Min. Typ. Max. Unit Input Voltage Range 5V Input Models 4.5 5 5.5 VDC 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 Input Surge Voltage (1 sec. max.) 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 Input Filter All Models Internal Capacitor

DC/DC CONVERTER 1W, SMD-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2015/07/31 REV:8 Page 2 of 4 Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Setting Accuracy --- ±1.0 ±3.0 %Vnom. Output Voltage Balance Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 ±1.5 % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise 0-20 MHz Bandwidth --- --- 120 mV P-P Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. Automatic Recovery General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage 60 Seconds 1000 --- --- VDC

1 Second 1200 --- --- VDC

I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 40 100 pF Switching Frequency 50 100 140 KHz MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 2,000,000 Hours Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 Level 3 Environmental Specifications Parameter Conditions Min. Max. Unit Operating Ambient Temperature Range (See Power Derating Curve) Natural Convection -40 +85 ℃ Case Temperature --- +90 ℃ Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Natural Convection Lead-free Reflow Solder Process IPC/JEDEC J-STD-020D.1 Power Derating Curve ℃Ambient Temperature Output Power (%) 100 -40 0 20 60 100 1108040 400LFM Natural Convection 20LFM Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 Specifications are subject to change without notice.

DC/DC CONVERTER 1W, SMD-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2015/07/31 REV:8 Page 3 of 4 Package Specifications Mechanical Dimensions (5V & 12V Input) Connecting Pin Patterns Mechanical Dimensions (24V Input) Connecting Pin Patterns ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) Pin Connections Physical Characteristics 2 +Vin

3 NA Case Material : Molding (flammability to UL 94V-0 rated)

4 Common

5 -Vout Weight (5V&12V Input) : 1.8g 6 NA Weight (24V Input) : 2.2g 7 +Vout 8 NA 9 NA 10 NA NA : Not Available for Electrical Connection 12.6 [0.50] 10.16 [0.40] 10.3 [0.41] 8.0 [0.31]2.3 [0.09] 12.6 [0.50] 10.16 [0.40] 10.45 [0.41] 8.3 [0.33]2.15 [0.08] 15.3 [0.6] 8.0 [0.31] 7.1 0.5 [0.28 0.02] 0.30.60 [0.02] [0.01] 1 2 3 4 10 9 8 7 [0.1] 2.54 [0.4] 10.16 9.2 [0.36] 7.0 [0.28] A 0.3 [0.01] 11.2 [0.44] 6.8 0~4 R0.5 S SEATING PLANE 0.15 S ( Magnification of A ) [0.27] Top View 1 2 3 5 10 9 8 6 9.0 [0.35] 7.4 [0.29] S SEATING PLANE ( Magnification of A ) 0.25 [0.01] 8.3 [0.33] 15.24 [0.6] [0.1] 2.54 8.05 0.5 [0.32 0.02] 0.25 [0.01]0.60 [0.02] [0.4] 10.16 11.2 [0.44] 7.8 [0.31] 0.15 S R0.5 0~4 Top View

DC/DC CONVERTER 1W, SMD-Package 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886 -6-2923149 E -mail: sales@minmax.com.tw 2015/07/31 REV:8 Page 4 of 4 Minmax Technology Co., Ltd. Test Setup Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with a inductor Lin (4.7μH) and Cin (220μF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz. +Out -Out +Vin -Vin DC / DC Converter Load Battery + Lin+ Cin To Oscilloscope Current Probe Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Out -Out +Vin -Vin Dual Output DC / DC Converter Resistive Load Scope Copper Strip Cout Com. ScopeCout Copper Strip Copper Strip Technical Notes Maximum Capacitive Load The MSAU200 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. For optimum performance we recommend 33μF maximum capacitive load. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < +Out -Out +Vin -Vin DC / DC Converter LoadDC Power Source Cin Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 0.47μF capacitors at the output. +Out -Out +Vin -Vin Load DC Power Source CoutCom. Dual Output DC / DC Converter Load Cout Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from measurements obtained in a test setup. DUT Position of air velocity probe and thermocouple 50mm / 2in Air Flow 15mm / 0.6in