MS9102 UMPCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
UMPCO, INC CAGE CODE No. 18076 REV N/C 01/30/09 MS9102 THIS CATALOG PAGE IS FOR REFERENCE ONLY. REQUEST A CERTIFIED UMPCO DRAWING FOR ACTUAL SPECIFICATIONS. ANY CONFLICT BETWEEN THIS DOCUMENT AND THE CERTIFIED DRAWING, THE CERTIFIED DRAWING WILL TAKE PRECEDENCE. IF THE DOCUMENT IS CONTROLLED BY ANY OTHER SOURCE THAN UMPCO, THE CERTIFIED DRAWING MUST BE PURCHASED THROUGH THAT ORGANIZATION. BRACKET-ANGLE 90°, .190 X .250 BOLT PART NUMBER 7100 LAMPSON AVE * PO BOX 5158 * GARDEN GROVE, CA 92846-5158 SALES: (714) 897-3531 * BUS: (714) 897-3536 * FAX: (714) 897-2611 .500 422 .270 .260 .068 .056 R .210 .200 R .500 .250 .350 .340 .288/.278 MARK PART NUMBER AND MFR IDENT PER AS 478 CLASS D D R .125 B A R .500 R .453 90° C DASH A B C D DASH A B C D REQUIREMENTS: 1. MATERIAL: CORROSION RESISTANT STEEL IN ACCORDANCE WITH AMS 5510. 2. DIMENSIONING AND TOLERANCING: DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ANSI Y14 5M. 3. TOLERANCE: UNLESS OTHERWISE SPECIFIE D, TOLERANCES SHALL BE FOR LINEAR DIMENSION ±.015, ANGULAR ±2°. 4. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A DASH NUMBER FROM THE TABLE. EXAMPLE: MS9102 -02 DASH NUMBER BASIC MS NUMBER MS9102-02 INDICATES – BRACKET, 90° ANGLE, LENGTH A, .562, LENGTH B, .625 NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. DO NOT USE UNASSIGNED DASH NUMBERS. 3. REMOVE BURRS AND BREAK SHARP EDGES.