MS536RAT COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice. Please check our website for latest information.
1102 Silver Lake Road
cps@coilcraft.com www.coilcraft-cps.com © Coilcraft, Inc. 2011 Document MS185-1 Revised 10/24/11 Inductance2 Percent Q3 SRF min4 DCR max5 Imax Part number1 Turns (nH) tolerance min (GHz) (mOhm) (A) MS536RAT90N_SZ 9 90 5,2 95 1.140 15 3.5 MS536RATR11_SZ 10 111 5,2 87 1.020 15 3.5 MS536RATR13_SZ 11 130 5,2 87 0.900 20 3.0 MS536RATR17_SZ 12 169 5,2 95 0.875 25 3.0 MS536RATR21_SZ 13 206 5,2 95 0.800 30 3.0 MS536RATR22_SZ 14 222 5,2 92 0.730 35 3.0 MS536RATR25_SZ 15 246 5,2 95 0.685 35 3.0 MS536RATR31_SZ 16 307 5,2 95 0.660 35 3.0 MS536RATR38_SZ 17 380 5,2 95 0.590 50 2.5 MS536RATR42_SZ 18 422 5,2 95 0.540 60 2.5 MS536RATR49_SZ 19 491 5,2 95 0.535 65 2.0 MS536RATR54_SZ 20 538 5,2 87 0.490 90 2.0 AIR CORE INDUCTORS 1. When ordering, specify tolerance and testing codes: MS536RATR54GSZ Tolerance: G = 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10003 2. Inductance measured at 50 MHz on an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A test fixture and correlation. 3. Q measured at 50 MHz on an Agilent/HP 4291A or equivalent with a 16193A test fixture or equivalent. 4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft CCF1268 test fixture. 5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Terminations Tin-lead (63/37) over copper Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 800 per 13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 6.1 mm pocket depth High-Reliability Air Core InductorsMS536RAT ■ High Q over a wide range of frequencies ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Tin-lead (63/37) terminations ensure the best possible board adhesion
cps@coilcraft.com www.coilcraft-cps.com © Coilcraft, Inc. 2011 Specifications subject to change without notice. Please check our website for latest information. 135° max 0° min Recommended Land Pattern Strip Length 0.095 2,42 0.185 4,70 0.080 2,04 0.314 7,98 A max B max C max DE 0.240 ±0.015 10,55 6,60 5,97 6,10 ±0,38 7,98 ±0,51 E B D C A Document MS185-2 Revised 10/24/11 MS536RAT Series Air Core Inductors Typical L vs Frequency Typical Q vs Frequency Dimensions are in inches mm AIR CORE INDUCTORS Typical Current Derating Suggested Land Pattern 1 10 Frequency (MHz) Inductance (nH) 100 1000 90 nH 246 nH 422 nH 169 nH 1000 900 800 700 600 500 400 300 200 100 11 0 Frequency (MHz) Q factor 100 1000 90 nH 246 nH 422 nH 169 nH 250 200 150 100 -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated rmsI 120 110 100 25°C