MS512PYA222MSZ

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. High Reliability Power Inductors MS512PYA

6030 POWER INDUCTORS

Inductance2 DCR (mOhms)3 SRF (MHz)4 Irms (A)6 Part number1 ±20% (µH) typ max min typ Isat (A)5 20°C rise 40°C rise 1. When ordering, please specify testing code: MS512PYA332MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Terminations Tin-lead (63/37) over copper. Core material Composite Weight 0.6 – 0.7 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 400/7″reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Exceptionally low DCR; soft saturation Irms Testing Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Document MS800-1 Revised 09/17/12

© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document MS800-2 Revised 09/17/12 L vs Current Current (A) Inductance (µH) 0.20 0.05 0.10 0.15 0.25 0.30 51 01 52 02 53 03 54 0 0.18 µH 05 10 15 20 25 30 35 40 0.2 0.1 0.4 0.5 0.3 0.6 Current (A) Inductance (µH) 0.33 µH 0.2 0.4 0.6 0.8 Current (A) Inductance (µH) 0.56 µH 05 10 15 20 25 30 35 40 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Current (A) Inductance (µH) 1.0 µH 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Current (A) Inductance (µH)0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 1.2 µH Current (A) Inductance (µH)0 0.4 0.8 1.2 1.6 2.0 2.4 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 1.8 µH Current (A) Inductance (µH) 2.0 0.5 1.0 1.5 2.5 3.0 24 68 10 12 14 16 18 20 2.2 µH Current (A) Inductance (µH) 3.3 µH 02 46 81 01 21 41 61 82 0 MS512PYA Series

© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document MS800-3 Revised 09/17/12 MS512PYA Series -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated rmsI 120 110 100 25°C Dimensions are in inches mm 0.122 3,1 max XXX 0.258 ±0.008 6,56 ±0,2 0.250 ±0.008 6,36 ±0,2 Recommended Land Pattern Dash number 0.049 ±0.002 1,25 ±0,05 0.110 ±0.01 2,79 ±0,25 0.056 1,43 0.159 4,04 A Dash B number (in / mm) (in / mm) ±0.008 in ±0,20 mm -181 0.213 / 5.42 0.224 / 5.69 -331 0.213 / 5.42 0.224 / 5.69 -561 0.213 / 5.42 0.224 / 5.69 -102 0.206 / 5.24 0.213 / 5.42 -122 0.206 / 5.24 0.213 / 5.42 -182 0.204 / 5.18 0.210 / 5.33 -222 0.201 / 5.12 0.206 / 5.24 -332 0.200 / 5.08 0.204 / 5.18 A (see table) B (see table) Suggested Land Pattern