MS4515 TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
SENSOR SOLUTIONS ///MS4515 Page 1 07/2016 MS4515 SPECIFICATIONS PCB Mounted Pressure Transducers Pressure Ranges from 2 to 30 inches H2O Amplified Ratiometric Analog Output Differential & Gage Temperature Compensated 3.3V or 5.0 Vdc Supply Voltage The MS4515 is a small, ceramic based, PCB mounted pressure transducer from Measurement Specialties. The transducer is built using the latest CMOS sensor conditioning circuitry to create a low cost, high performance transducer designed to meet the strictest requirements from OEM customers. The MS4515 is fully calibrated and temperature compensated with a total error band (TEB) of less than 1.0% over the compensated range. The sensor operates from single supply of either 3.3 or 5.0Vdc and requires a single external component for proper operation. The rugged ceramic transducer is available in side port, top port, and manifold mount versions and can measure gage or differential pressure from 2 to 30 inches H2O. The 1/8” barbed pressure ports mate securely with 3/32” ID tubing.
SENSOR SOLUTIONS /// MS4515 07/2016 Page 2
FEATURES
Inches H2O Pressure Ranges PCB Mountable High Level Analog Output Barbed Pressure Ports
APPLICATIONS
Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel Meter Air Movement/Environmental Controls Pneumatic Controls STANDARD RANGES (INCHES H2O) Range Gage Differential Option Availability
2 DS, SS, TP, MM
4 DS, SS, TP, MM DS, SS, TP, MM
5 DS, SS, TP, MM DS, SS, TP, MM
10 DS, SS, TP, MM DS, SS, TP, MM -F
20 DS, SS, TP, MM DS, SS, TP, MM -F
30 DS, SS, TP, MM DS, SS, TP, MM -F
See Package Configurations: DS= Dual Side Port, SS= Single Side Port, TP= Top Port, MM= Manifold Mount Pin Style “L” is only available SS and MM port types. Pin Style “C” is only available SS, TP and MM port types.
SENSOR SOLUTIONS /// MS4515 07/2016 Page 3 BLOCK DIAGRAM ABSOLUTE MAXIMUM RATINGS Parameter Conditions Min Max Unit Notes Supply Voltage TA = 25 °C 2.7 5.5 V Output Current TA = 25°C 3 mA Load Resistance (RL) TA = 25°C 10 kΩ Storage Temperature -40 +125 °C Humidity TA = 25°C 95 %RH Non Condensing Overpressure TA = 25 °C, both Ports Not to Exceed 300 psi Burst Pressure TA = 25 °C, Port 1 psi See Table 1 ESD HBM -4 +4 kV EN 61000-4-2 Solder Temperature 250°C, 5 sec max. TABLE 1- BURST PRESSURE BY RANGE AND PACKAGE STYLE Range DS TP, SS, MM Unit 002 10 10 psi 004 10 10 psi 005 10 10 psi 010 10 10 psi 020 20 20 psi 030 20 20 psi
SENSOR SOLUTIONS /// MS4515 07/2016 Page 4 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Mechanical Shock Mil Spec 202F, Method 213B, Condition C, 3 Drops Mechanical Vibration Mil Spec 202F, Method 214A, Condition 1E, 1Hr Each Axis Thermal Shock 100 Cycles over Storage Temperature, 30 minute dwell Life 1 Million FS Cycles MTTF >10Yrs, 70 ºC, 1.188 Million Pressure Cycles, 120%FS Pressure PERFORMANCE SPECIFICATIONS Supply Voltage1: 5.0V or 3.3 Vdc Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Accuracy -0.25 0.25 %Span 2 Total Error Band (TEB) -1.0 1.0 %Span 3,5 Total Error Band (TEB) 4inH2O and Below -2.0 2.0 %Span 3,5 Supply Current 3 mA 5 Compensated Temperature 0 +60 ºC 4 Operating Temperature -10 +85 ºC Response Time 1 mS 5 Weight 3 grams Media Non-Corrosive Dry Gases Compatible with Ceramic, Silicon, Borosilicate Glass, RTV, Gold, Aluminum and Epoxy. See “Wetted Material by Port Designation” chart below. Notes 1. Proper operation requires an external capacitor placed as shown in Connection Diagram. Output is ratiometric to supply voltage variations of less than 10%. 2. Accuracy: The maximum deviation from a best fit straight line (B FSL) fitted to the output measured over the pressure range at 25°C. Includes all errors due to pressure non linearity, hysteresis, and non repeatability. 3. Total error band includes all accuracy errors, thermal erro rs over the compensated temperature range, and span and offset calibration tolerances. For ideal sensor output with respect to input pressure, reference Pressure Transfer Function charts below. TEB values are valid only at the calibrated supply voltage. 4. For errors beyond the compensated temperature range, see Extended Temperature Multiplier chart below. 5. This product can be configured for custom OEM requirements , contact factory for lower power consumption or higher accuracy.
SENSOR SOLUTIONS /// MS4515 07/2016 Page 5 CONNECTION DIAGRAM Notes 1. Place 100nF capacitor between Supply and GND to within 2 c m of sensor. PRESSURE AND TEMPERATURE TRANSFER FUNCTION 0.000 0.330 1.650 2.970 3.300 Pmin Output Voltage (V) PmaxPressure 0.165 3.135 A Type B Type 0.000 0.500 2.500 4.500 5.000 Pmin Output Voltage (V) PmaxPressure 0.250 4.750 A Type B Type Pmax-Pmin *A Type: Pmax-Pmin * + 0.250B Type: + 0.500(Pressure applied - Pmin) (Pressure applied - Pmin) Pmax-Pmin * (Pressure appliedA Type: Pmax-Pmin * + 0.165B Type: - Pmin) + 0.330 (Pressure applied - Pmin)
SENSOR SOLUTIONS /// MS4515 07/2016 Page 6 EXTENDED TEMPERATURE MULTIPLIER CHART PACKAGE, PINOUT & PRESSURE TYPE CONFIGURATION 0.0 0.5 1.5 -10 2.0 0 10 20 30 40 50 60 80 70 90 1.0 2.5
SENSOR SOLUTIONS /// MS4515 07/2016 Page 7 Pressure Type Pmin Pmax Description Differential/ Bidirectional -Prange +Prange Output is proportional to the difference between Port 1 and Port 2. Output swings positive when Port 1> Port 2. Output is 50% of supply voltage when Port 1=Port 2 Gage 0psiG +Prange Output is proportional to the difference between 0psiG (Pmin) and Port 1. Output swings positive when Port 1> Port 2. Prange is equal to the maximum full scale pressure specified in the ordering information. WETTED MATERIAL BY PORT DESIGNATION Material Style Port Ceramic Silicon Borosilicate Glass RTV Gold Aluminum Epoxy DS, MM Port 1 X X X X X Port 2 X X X X X X X SS, TP,SM Port 1 X X X X X X X "X" Indicates Wetted Material Pin Name Pin Function SUPPLY 2 Positive Supply Voltage OUTPUT 3 Analog Output GND 4 Ground 1, 5-8 No Connection
SENSOR SOLUTIONS /// MS4515 07/2016 Page 8 DIMENSIONS (are in INCHES [mm]) Model: MS4515-DSvoxxxyP Model: MS4515-DSvoxxxyS
SENSOR SOLUTIONS /// MS4515 07/2016 Page 9 Model: MS4515-SSvoxxxyP Model: MS4515-SSvoxxxyS
SENSOR SOLUTIONS /// MS4515 07/2016 Page 10 Model: MS4515-TPvoxxxyP Model: MS4515-TPvoxxxyS
SENSOR SOLUTIONS /// MS4515 07/2016 Page 11 Model: MS4515-SSvoxxxyL Model: MS4515-MMvoxxxyL
SENSOR SOLUTIONS /// MS4515 07/2016 Page 12 Model: MS4515-MMvoxxxyP Model: MS4515-MMvoxxxyS
SENSOR SOLUTIONS /// MS4515 07/2016 Page 13 Model: MS4515-SSvoxxxyC Model: MS4515-TPvoxxxyC
SENSOR SOLUTIONS /// MS4515 07/2016 Page 14 Model: MS4515-MMvoxxxyC
SENSOR SOLUTIONS /// MS4515 07/2016 Page 15 AVAILABLE OPTIONS Gel Coat (-F Option) The MS4515 is designed for non ionic and clean dry air applications. Select this option for added protection in high humidity or slightly corrosive environments with the application of a silicone gel elastomer to sensor and ASIC. For questions concerning media compatibility, contact the factory.
ORDERING INFORMATION
Model - Package Style Supply Voltage Output Type Pressure Range (“ H2O) Pressure Type Pin Style Option Type MS4515 SS = Single Sideport DS = Dual Sideport TP = Top Port MM = Manifold Mount 3 = 3.3 Vdc 5 = 5.0 Vdc A = 10% to 90% B = 5% to 95% 002 004 005 010 020 030 D = Differential G = Gage P = Thru Hole S = J Lead L = In Line C = Castellation Blank = No Option F = Gel Coating NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity company
45738 Northport Loop West
Fremont, CA 94538 Tel: +1 800 767 1888 Fax: +1 510 498 1578 customercare.frmt@te.com MEAS Switzerland Sarl, a TE Connectivity company Ch. Chapons-des-Prés 11 CH-2022 Bevaix Tel: +41 32 847 9550 Fax: +41 32 847 9569 customercare.bevx@te.com Measurement Specialties (China) Ltd., a TE Connectivity company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen, 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is belie ved to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s ob ligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved.