DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. High-Reliability Power Inductors MS414PJB
3314 POWER INDUCTORS
Document MS541-1 Revised 09/24/12 Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel. Weight 44.1 – 46.5 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm ■ High temperature material allows operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion 1. When ordering, please specify testing code: MS414PJB105MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified induc- tance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Com- ponents” before soldering. Inductance DCR Isat (A)5 Irms (A)6 ±20%2 max3 SRF (MHz)4 10% 20% 30% 20°C 40°C Part number1 (µH) (Ohms) min typ drop drop drop rise rise
© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. MS414PJB Series (3315) 3314y POWER INDUCTORS Typical L vs CurrentTypical L vs Frequency 0.01 0.1 11 0 Current (A) 0.1 10000 1000 100 Inductance (µH) 1 µH 10 µH 3.3 µH 33 µH 100 µH 330 µH 1000 µH 0.01 0.1 11 0 Frequency (MHz) 0.1 10000 1000 100 Inductance (µH) 1 µH 10 µH 3.3 µH 33 µH 100 µH 330 µH 1000 µH Current Derating -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated Current 120 110 100 25°C Isat Irms Dimensions are in inches mm Document MS541-2 Revised 09/24/12