MS12AFW NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS Distinctive Characteristics Available in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability. Antijamming design protects contacts from damage due to excessive downward force on the actuator. High internal barriers between poles and insulating sheet between case and actuator block give added protection to contacts. Specially composed silver alloy contacts for power applications or gold contacts for logic level applications give high contact reliability. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of frame to case well above base and terminals provides 1,500V dielectric strength. Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS General Specifications Electrical Capacity (Resistive Load) Power Level (code W): 6A @ 125V AC or 3A @ 250V AC Logic Level (code G): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Logic/Power Level (code A): Combines W & G ratings Note: Find additional explanation of dual rating & operating range in Supplement section. Other Ratings Contact Resistance: 10 milliohms maximum for silver; 20 milliohms maximum for gold Insulation Resistance: 1,000 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 100,000 operations minimum Electrical Life: 25,000 operations minimum for silver; 50,000 operations minimum for gold Contact Timing: Nonshorting (break-before-make) Total Travel: On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm) Materials & Finishes Actuator: Glass fiber reinforced polyester Frame: Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount Dust Cover: Phosphor bronze with nickel plating Case: Glass fiber reinforced diallyl phthalate resin (UL94V-0) Movable Contacts: Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Stationary Contacts: Silver capped copper with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Terminals: Copper or brass with silver or gold plating Environmental Data Operating Temp Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Wave Soldering recommended (PC Mount). See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 rated case UL Recognized: All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. C-UL Recognized: All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. CSA Certified: All Double Throw & 3 Throw models certified at 6A @ 125V AC, 3A @ 250V AC, & 0.4VA maximum @ 28V DC; CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. R
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS ACTUATORS A .150” (3.8mm) Wide for Single or Double Pole B .323” (8.2mm) Wide for Double Pole
1 AMS
Gold Contacts with 0.4VA Rating SPDT ON-NONE-ON Circuit CIRCUITS
2 ON NONE ON
3 ON OFF ON
0 ON ON ON
& RATINGS W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4V A max. @ 28V AC/DC max. A Gold over Silver; Rated 6A @ 125V AC & 0.4V A max. @ 28V AC/DC max. IMPORTANT: Switches are supplied without UL, C-UL & CSA markings un- less specified. Specific models & ratings are noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE MS12ASG30 G .150” (3.8mm) Wide Actuator MOUNTING F Panel Mount (Terminal 01 only) N PCB Mount (Terminal 03 only) S Bracket Mount (Terminals 13, 30, & 40 only) TERMINALS
01 Solder Lug
03 Straight PC
13 Straight with Bracket
30 Right Angle PC
40 Vertical PC
1 SPDT
2 DPDT
S TYPICAL SWITCH ORDERING EXAMPLE
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS Slide Position Connected Terminals Throw & Schematics Pole Model Left Center Right Left Center Right Note: Terminal numbers are not actually on the switch. SP MS12 MS13 ON ON NONE OFF ON ON 2-1 OPEN 2-3 SPDT DP MS22 MS23 ON ON NONE OFF ON ON 2-1 5-4 OPEN 2-3 5-6 DPDT For 3 Throw (3-On) Connected Terminals & Schematics Pole Model Left Center Right External Connection SP MS20 ON ON ON The SP3T model utilizes a double pole base. External connections must be made during field installation.2-1 5-4 2-3 5-4 2-3 5-6 ACTUATORS Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. W Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC Gold over Silver POLES & CIRCUITS 2 (COM) 1 3 4 6 2 5 (COM) A G A CONTACT MATERIALS & RATINGS Note: Complete explanation of operating range in Supplement section. Power Level 6A @ 125V AC or Logic Level or 0.4VA maximum @ 28V AC/DC maximum .150” (3.8mm) Wide for Single Pole (out) 6 3 (out)(out) External Conn Common (in) .150” (3.8mm) Wide for Double Pole B .323” (8.2mm) Wide for Double Pole Only (3.8) .150 (3.8) .150(3.8) .150 (3.8) .150 (3.8) .150 (8.2) .323 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection 1 (out) 4 (out) 6 (out) 2 (in) External Connection
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS Epoxy Seal (2.0) .079 (2.0) .079 (4.0) .157 (1.1) .043 Thk = (0.8) .031 MOUNTING TYPES & TERMINALS Panel Mount (Combines with Solder Lug Terminal 01 only) Support Bracket Mount (For Terminals 13, 30, & 40) F S Straight PC Mount (Combines with Straight PC Terminal 03 only) N 13Solder Lug01 Straight PC03 TYPICAL SWITCH DIMENSIONS Solder Lug Terminals Single Pole MS12AFW01 Actuator in LEFT Position Solder Lug Terminals Double Pole MS22BFW01 Actuator in LEFT Position Dimension A = .268” (6.8mm) for on-none-on .319” (8.1mm) for on-off-on & on-on-on Maximum Panel Thickness: .197” (5.0mm) (17.53) .690 (2.4) Dia Typ .094 A (9.0) .354 (17.53) .690 (2.4) Dia Typ .094 A (4.19) .165 SP or DP with .150” (3.8mm) Actuator DP only with .323” (8.2mm) Actuator Maximum Panel Thickness: For Straight PC with Bracket Terminal 13: .197” (5.0mm) For Angle Mount Terminals 30 & 40: .177” (4.5mm) Straight PC with Bracket Right Angle PC30 Vertical PC40 Epoxy Seal (4.8) .189 (6.35) .250 (1.17) .046 Thk = (0.8) .031 (6.1) .240 (6.6) .260 (19.6) .772 (17.53) .690 (1.2) R Typ .047 (3.8) Sq .150 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.7) Typ .185 (0.5) .020 (0.4) .016 (5.1) .201 (6.4) .252 (4.5) .177 ONON (12.7) .500 (0.5) .020 (2.0) .079 (6.1) .240 (19.6) .772 (17.53) .690 (1.2) R Typ .047 (8.2) .323 (6.1) .240 (19.6) .772 (17.53) .690 (1.2) R Typ .047 (3.8) .150 (3.8) .150 (1.1) x (2.0) Typ .043 x .079 (0.8) Typ .031 (4.7) Typ .185 (0.5) .020 (0.4) .016 (5.1) .201 (7.6) .299 (4.5) .177 ONON 4 1 (2.0) Typ .079 (12.7) .500 (4.8) .189 (0.5) .020 (11.4) .449
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS TYPICAL SWITCH DIMENSIONS Straight PC Terminals with Bracket Single Pole MS12ANG03 Actuator in LEFT Position MS22BNG03 Actuator in LEFT Position Straight PC Terminals Double Pole Straight PC Terminals Single Pole MS22BSG13 Actuator in LEFT Position (1.6) Typ .063 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (4.7) Typ .185 (1.8) Dia Typ .073 (4.7) Typ .185 (4.8) .189 (1.8) Dia Typ .073 3 6 1 4 (1.6) Typ .063 (2.4) Typ .095 (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059CL Straight PC Terminals with Bracket Double Pole MS12ASG13 Actuator in LEFT Position (6.6) .260 (3.8) Sq .150 (0.8) Typ .031 (4.7) Typ .185 (4.8) .189 (5.1) .201 (6.4) .252 (6.35) .250 ONON (12.7) .500 (0.5) .020 (1.17) .046 (8.2) .323 (3.8) .150 (0.8) Typ .031 (4.7) Typ .185 (4.8) .189 (5.1) .201 (7.6) .299 (6.35) .250 ONON 4 1 (1.17) Typ .046 (12.7) .500 (4.8) .189 (0.5) .020 (11.4) .449 (3.8) .150 (3.8) .150 (5.6) .220 (3.8) .150 (0.8) Typ .031 (4.7) Typ .185 (0.36) .014 (5.1) .201 (13.1) .516 (6.7) .264 (15.8) .622 (4.8) .189 (0.4) Typ .016 ONON (12.7) .500 (0.5) .020 (1.17) .046 (7.1) .280 (3.2) .126 (1.2) Typ .047 (3.8) .150 (10.4) .409 (8.2) .323 (10.4) .409 (3.8) .150 (0.8) Typ .031 (4.7) Typ .185 (0.36) .014 (5.1) .201 (14.3) .563 (6.7) .264 (15.8) .622 (4.8) .189 (0.4) Typ .016 ONON 4 1 (1.2) Typ .047 (12.7) .500 (4.8) .189 (0.5) .020 (11.9) .469 (1.17) Typ .046 (3.2) .126
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS TYPICAL SWITCH DIMENSIONS Right Angle PC Terminals Single Pole MS12ASG30 Actuator in LEFT Position Right Angle PC Terminals Double Pole MS22BSG30 Actuator in LEFT Position Vertical PC Terminals Single Pole MS12ASG40 Actuator in LEFT Position Vertical PC Terminals Double Pole MS22BSG40 Actuator in LEFT Position 3 2 1 (1.8) Dia Typ .073 (4.7) Typ .185 (9.53) .375 (6.6) Typ .260 (1.5) Dia Typ .059 (1.5) Dia Typ .059 2 13 (4.7) Typ .185 (6.6) Typ .260 (12.7) .500 5 46 (3.81) .150 (1.8) Dia Typ .073 (10.16) .400 (1.5) Dia Typ .059 (4.45) Typ .175 (3.81) Typ .150 (1.8) Dia Typ .073 (4.8) .189 (1.5) Dia Typ .059 (12.7) .500 (4.45) Typ .175 (3.81) Typ .150 (1.8) Dia Typ .073 (0.4) Typ .016 (13.2) .520 (5.7) .224 (9.53) .375 (1.2) .047 (1.27) .050 (0.5) .020 (3.2) .126(3.81) .150 (3.8) Sq .150 (5.1) .201 (12.7) .500 1 2 3 (6.6) .260 (0.8) Typ .031 (4.7) Typ .185 (3.8) .150 (3.8) .150 (13.2) .520 (0.4) Typ .016 (6.2) .245 (3.2) .126 (0.5) .020 (3.81) .150 (1.27) Typ .050 (1.2) .047 (5.7) .224 (12.7) .500 (8.2) .323 (5.1) .201 (3.8) .150 (13.2) .520 (0.4) Typ .016 (3.8) .150 (1.2) Typ .047 (4.45) .175 (1.2) Typ .047 (4.45) .175 (3.8) Sq .150 (0.4) .016 (5.3) .209 (5.1) .201 (10.16) .400 (3.81) Typ .150 (0.8) Typ .031 (2.7) .106 (6.9) .270 ONON (6.6) .260 (12.7) .500 (0.5) .020 (1.27) .050 (8.2) .323 (1.2) Typ .047 (4.45) .175 (3.8) .150 (0.4) .016 (5.3) .209 (5.1) .201 (12.7) .500 (3.81) Typ .150 (0.8) Typ .031 (2.7) .106 (6.9) .270 ONON (11.4) .449 5 (12.7) .500 (0.5) .020 (4.8) .189 (1.27) Typ .050 (12.7) .500 (11.4) .449 4 5 6 1 2 3 (4.7) Typ .185 (0.8) Typ .031