MS11-CX240D5

MS11-CMX CRYDOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

SERIES MS11-CMX. Rev. 110707 PAGE 1 OF 3  DIN Rail Mount (TS 35)  MOSFET Output DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a DIN Rail (TS-35) mount air-cooled package. MODEL NO. MS11-CMX60D10 MS11-CMX100D6 INPUT SPECIFICATIONS Control Voltage Range 5-10 Vdc Nominal Input Impedance 300 Ohm Typical Input Current @ 5 Vdc 12 mA Must Turn On Voltage 5 Vdc Must Turn Off Voltage 1.0 Vdc OUTPUT SPECIFICATIONS Operating Voltage Range 0-60 Vdc 0-100 Vdc Load Current Range 0-10 Adc 0-6 Adc Max. Surge Current, (10 msec) 100 Apk 100 Apk Max.Off-State Leakage @ Rated Voltage 100 µAdc Max. On-State Resistance @ Rated Current (R DS-ON ) .018 Ohm .040 Ohm Max. On-State Voltage Drop @ Rated Current 0.18V 0.24V Max.Turn-On Time @ 10Vdc Control 1.0 msec Max. Turn-Off TIme @ 10Vdc Control 300 µsec GENERAL NOTES © 2007 CRYDOM Inc., Specifications subject to change without notice. 5-10 Vdc

300 Ohm

5 Vdc

1.0 Vdc

100 µAdc 1.0 msec 300 µsec Series MS11-CMX 3 -10 Amp  0-200 Vdc  DC Output Extra Low On State Resistance Input Status LED All parameters at 25ºC unless otherwise specified. Dielectric and insulation resistance are measured between input and output. Inductive loads should be diode suppressed. At 55 Vdc. 1 3 MS11-CMX60D5 5-10 Vdc

60 Apk

100 µAdc .10 Ohm 0.5V 1.0 msec 300 µsec MS11-CMX200D3 6-10 Vdc

6 Vdc

30 Apk

100 µAdc .20 Ohm 0.6V 1.0 msec 300 µsec For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030  FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506

SERIES MS11-CMX. Rev. 110707 PAGE 2 OF 3 Series MS11-CMX 3 -10 Amp  0-200 Vdc  DC Output All dimensions are in millimeters (not to scale) Colour of carrier including terminations - orange 29.0 12.585.0 54.0 -A2 +A1 Input Output CMX Series Solid State Relay CRYDOM DIN Rail TS35 GENERAL SPECIFICATIONS Dielectric Strength 2500 Vrms Insulation Resistance (Min.) @ 500 Vdc 10 9 Ohm Max. Capacitance (Input/Output) 15 pF Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -30 to 125°C MECHANICAL SPECIFICATIONS Weight: (typical) 30 g Encapsulation(SSR): Thermally Conductive Epoxy CURRENT DERATING CURVES 5.0 6.0 7.0 3.0 1.0 2.0 4.0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] LOAD CURRENT [AMPS] Max. Load Current vs. Temp. 10.0 12.0 6.0 2.0 4.0 8.0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] LOAD CURRENT [AMPS] CMX100D6 CMX60D5 CMX60D10 CMX200D3 APPROVALS (SSR ONLY) UL E116950 (3A, 6A & 10A Models) © 2007 CRYDOM Inc., Specifications subject to change without notice. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030  FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506

AC CONTROL (120Vac) MODEL NUMBERS (24Vac) MS11-CXE240A5 DC CONTROL (5Vdc) (24Vdc)1 Operating Voltage (47-63 Hz) [Vrms] 12-280 Load Current Range [Arms] .06-5 Transient Overvoltage [Vpk] 600 Max. Surge Current, (16.6ms) [Apk] 250 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.4 Maximum I 2 t for Fusing, (8.3 msec.) [A2sec] 260 Max. Off-State Leakage Current @ Rated Voltage [mArms] 0.1 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]2 500 Max. Turn-On Time 3 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec (AC Control) Power Factor (Min.) with Max. Load 0.5 Nominal Voltage 5Vdc 24Vdc MODEL NUMBERS Control Voltage Range 4-5 Vdc 15-32 Vdc 90-140 Vrms 18-36 Vrms Nominal Input Impedance 300 Ohm 1.0k Ohm 14.1k Ohm 4.2k Ohm Typical Input Current @ Nominal Voltage 12 mA 8 mA 10 mArms 5 mArms All parameters at 25ºC unless otherwise specified. 2Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3 Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). SCR Output Rating Ultra High Surge Crydom’s Patented Design SERIES MS11-CX. Rev. 012505 PAGE 1 OF 2 Series MS11-CX exceptional steady state current, plus ultra-high surge ratings. Models are available to switch up to 280 Vrms with AC or DC control, and either zero-cross or random turn-on ("R") switching ver- sions. © 2005 CRYDOM CORP, Specifications subject to change without notice.

5 Amp 240 Vac AC Output

Crydom's family of SPST-NO relays achieves the highest power switching capability in a DIN mounted air-cooled package. Advanced features include Input Status LED DIN Rail Mount (TS-35) No input status LED on AC control modules. OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS DC CONTROL MS11-CXE240D5 120Vac 24Vac AC CONTROL MS11-CX240A5 MS11-CXE240A5 GENERAL NOTES For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700  FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com  WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070  FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506

5.0 6.0 3.0 1.0 2.0 4.0 20 40 60 80 LOAD CURRENT [AMPS] Max. Load Current vs. Temp. Dielectric Strength 50/60Hz Input/Output/Base 2500 Vrms Insulation Resistance (Min.) @ 500 Vdc 10 9 Ohm Max. Capacitance Input/Output 10 pF Ambient Operating Temperature Range -30 to 80ºC Ambient Storage Temperature Range -30 to 80ºC Weight: (typical) Encapsulation (SSR): Thermally Conductive Epoxy SERIES MS11-CX Rev. 012405 PAGE 2 OF 2 © 2005 CRYDOM CORP, Specifications subject to change without notice. R Random Turn-On Switching Example: MS11-CX240D5R, MS11-CX240A5R APPROVALS ( SSR ONLY ) UL E 116949 CSA LR 81689 VDE 70938 UG (240V, DC Control Only) All dimensions are in millimeters (not to scale) Colour of carrier and termination housing - orange 30 grms Series MS11-CX 5Amp  240 Vac  AC Output Input status LED is on DC control module only 29.0 12.585.0 54.0 -A2 +A1 Input Output CX Series Solid State Relay CRYDOM DIN Rail TS35 GENERAL SPECIFICATIONS MECHANICAL SPECIFICATION CURRENT DERATING CURVE AMBIENT TEMPERATURE [ C] AVAILABLE OPTIONS For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700  FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com  WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070  FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506

SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment.

• Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
• Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
• Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
• Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
• Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
• Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
• Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSI ONE.
• Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra
• Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one L'omissione di seguire queste istruz ioni provocherà la morte o di lesioni serie RISCO DE DESCARGA ELÉTTRICA OU EXPLOSÃO
• Desconectar o equipamento de toda á energia antes de instalar ou trabalhar com este equipamen to
• Verificar todas as conexões e recolocar todas as tampas antes de religar o equipamento O não cumprimento destas instruções pode levar á morte ou lesões sérias. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
• Respecter les consignes de montage, et notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• The product's side panels may be hot, allow time for product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Failure to follow this instruction can result in serious injury, or equipment damage. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. A não observância destas precauções pode provocar a morte, ferimentos graves ou danos materiais. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
• I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo apparecchio. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos extraños en el producto. RISCO DE DANO MATERIAL E DE AQUECIMENTO
• Os painéis laterais do produto podem estar quentes; dê tempo ao produto para arrefecer antes de lhe tocar.
• Siga devidamente as instruções de montagem.
• Não permita a entrada de líquidos e de objectos estranhos no produto. DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / AVISO SERIES MS11-CMX. Rev. 110707 PAGE 3 OF 3

ANNEX – ENVIRONMENTAL INFORMATION: The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die X O O O O O Solder X O O O O O 䰘ӊ - ⦃ֱֵᙃ: ヺড়ЁढҎ⇥݅੠೑⬉ᄤ㸠ϮᷛޚSJ/T11364 - 2006, ৡ⿄ 䪙 ∲ 䬝Ӌ䫀 ໮⒈㘨㣃 ໮⒈Ѡ㣃䝮 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) ञᇐԧ㢃⠛ X O O O O O ⛞᥹⚍ X O O O O O © 2007 CRYDOM Inc., Specificat ions subject to change without notice.