MRX108-A NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Power Level Rotaries Series MR Distinctive Characteristics Actual Size Positive detent mechanism for distinct feel and audible feedback. Metal bushing and housing construction increases durability. Adjustable stopper plate allows 2-8 position settings. High contact reliability achieved by the self-cleaning contact mechanism. Break-before-make contact timing with various mechanism types: sliding contacts in MRX, contactor dish in MRY, and butt contacts in MRT models. Terminal types include PC-turret for MRX, turret for MRY, and solder lug for MRT models. Molded-in PC-turret and turret terminals prevent entry of flux and other contaminants.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Power Level Rotaries Series MR General Specifications Electrical Capacity (Resistive Load) For MRX: 2A @ 125V AC or 1A @ 30V DC For MRY: For MRY106G: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: See Supplement Index to find explanation of operating range. For all other MRY models: 3A @ 125V AC or 2A @ 30V DC For MRT: For MRT22: 10A @ 125V AC or 4A @ 30V DC For MRT23: 5A @ 125V AC or 3A @ 30V DC Other Ratings Contact Resistance: 10 milliohms maximum for MRX, MRY, & MRT; 20 milliohms maximum for MRY106G Insulation Resistance: 100 megohms minimum @ 500V DC for MRX & MRY 200 megohms minimum @ 500V DC for MRT Dielectric Strength: 1,000V AC minimum for 1 minute minimum Mechanical Life: 15,000 operations minimum Electrical Life: 7 ,500 operations minimum Contact Timing: Nonshorting (break-before-make) MRX: Self-cleaning, sliding contact; MRY: Rotary contactor dish; MRT: Butt contacts Indexing: 45° for MRX; 60° for MRY; 120° for MRT22; 60° for MRT23 Materials & Finishes Shaft: Brass with nickel plating Stopper Plate: Steel with zinc plating for MRX & MRY Bushing/Housing: Brass with nickel plating Movable Contacts: Silver alloy for MRX & MRT; copper with silver plating for MRY106; copper with gold plating for MRY106G End Contacts & Terminals: Silver alloy & copper with silver plating for MRX & MRT; silver alloy plus brass with silver plating for MRY106; silver alloy with gold plating for MRY106G Common Contacts & Terminals: Copper with silver plating for MRX, MRY106 & MRT22; brass with gold plating for MRY106G; brass with silver plating for MRT23 Base: Phenolic resin Environmental Data Operating Temperature Range: –10°C through +70°C (+14°F through +158°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 3 right angled directions, with 3 shocks in each direction) Installation Mounting Torque: .686Nm (6.08 lb •in) Cap Installation Force: 19.6 ~ 29.4N (4.41 ~ 6.61 lbf) Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications UL & C-UL MRT22 models recognized at 10A @ 125V AC; MRT23 models recognized at 5A @ 125V AC Recognized: UL File No. WOYR2.E44145 Add “/U” to end of part number to order UL mark on switch C-UL File No. WOYR8.E44145 Add “/C-UL” to end of part number to order C-UL mark on switch R
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Power Level Rotaries Series MR TYPICAL SWITCH ORDERING EXAMPLE KNOBS A Plain Black B Small Color Tipped C Large Color Tipped 108 COLORS For Plain Knob No Code Black For Color Tipped A Black B White C Red E Yellow F Green G Blue H Gray X X Shaft Actuated with PC-Turret Terminals ACTUATORS & TERMINALS Shaft Terminal MR Y A Shaft Actuated with Turret Terminals T Shaft Actuated with Solder Lug Terminals X Shaft Actuated with PC-Turret Terminals POLES & CIRCUITSACTUATORS & TERMINALS Y Shaft Actuated with Turret Terminals T Shaft Actuated with Solder Lug Terminals
108 SP with 2-8 Positions
204 DP with 2-4 Positions
106 SP with 2-6 Positions
106G SP with 2-6 Positions Gold Contacts 0.4VA
22 DPDT ON-NONE-ON
23 DPDT ON-OFF-ON
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE MRX108-A Shaft Actuated with Plain Black Knob SP with 2-8 Adjustable Positions PC-Turret Terminals IMPORTANT: MRT switches are supplied without UL marking unless specified. Specific models & ratings are noted on the General Specifications page. (3.15) Dia .124 (1.0) .039 (20.0) .787 (2.3) .091 (3.15) Dia .124 (1.0) .039 (20.0) .787 (2.3) .091 (3.15) Dia .124 (1.0) .039 (20.0) .787 (2.3) .091 (2.0) .079 (4.0) .157 (2.4) .094(0.9) .035 Thk = (0.7) .028 (5.0) .197 (0.8) .031 Thk = (0.9) .035 (5.0) .197 (1.3) Dia .051 Shaft Terminal Shaft Terminal
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Power Level Rotaries Series MR Pole Model Number of Positions Stopper Settings Number of Terminals Schematics SP MRX108 2-8 2, 3, 4, 5, 6, 7, 8 1 COM, 8 LOAD MRY106 MRY106G 2-6 2, 3, 4, 5, 6 1 COM, 6 LOAD DP MRX204 2-4 2, 3, 4 2 COM, 8 LOAD DPDT MRT22 2 ON-NONE-ON 2-3 2-1 5-6 5-4 MRT23 3 ON-OFF-ON 2-3 OPEN 2-1 5-6 OPEN 5-4 4P MRX402 2 1 & 2 4 COM, 8 LOAD POLES & CIRCUITS POSITION SETTING FOR MRX & MRY MODELS Each switch is supplied with the stopper set for the maximum number of positions allowed for that model. Prior to installation, the desired position setting should be made. Contact factory for continuous rotation. 1. Using the actuator knob, turn the shaft counterclockwise to the extreme left. If the shaft is not turned to this extreme position where the white line on the knob points to the number 1 position shown on the side of the switch, proper setting cannot be achieved. 2. Remove the knob from the shaft and loosen the nut far enough to allow raising the stopper plate for resetting to the desired position. 3. Note the position numbers on the side of the switch; these correspond to the terminal numbers and stopper holes. Insert the stopper in the hole numbered for the maximum desired number of stop settings. Satisfactory switch functioning cannot be assured if the stopper plate is not properly positioned. 4. Tighten the nub (beveled side up) firmly against the stopper plate. TYPICAL SWITCH DIMENSIONS MRX • PC-Turret Terminals Single, Double & Four Pole MRX108 1 2 1 2 1 2 1 2 A B C D 1 3 4 6 2 5 (COM) 1 2 3 4 1 2 3 4 A B 1 2 3 4 5 6 A 1 2 3 4 5 6 7 8 A 2 1 8 1 6 AT513M Hex Face Nut AT507M Locking Ring AT509 Lockwasher MRX MRY Mounting Hardware Packaged Loose with Each Switch Hex Nut Stopper Plate Factory Assembled: 50° Keyway (3.15) Dia .124 COM A (2.3) .091 (0.9) Typ .035 (0.8) Typ .031 (10.0) .394 (5.0) .197 (17.3) .681 (5.6) .220 (20.0) .787 (1.0) .039 M6 P0.75 COM B A COM C D B 90° Typ 22.5° 45° Typ (1.5) Typ .059 (0.5) Typ .020 (4.0) Dia .157 (14.0) Dia .551
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Power Level Rotaries Series MR KNOBS A AT433 Plain Black Color Codes: Black White Red Yellow Green BlueA B C E F G GrayH (11.0) Dia .433 (19.0) Dia .748 (9.5) .374 (13.0) .512 (0.5) .020 (16.0) Dia .630 (9.5) Dia .374 (14.3) .563 (9.5) .374 (0.5) .020 (11.0) Dia .433 (18.0) Dia .709 (9.5) .374 (15.8) .622 (0.5) .020 Base Material: Polyester Base Color: Black Polyamide Tip Colors: A, B, C, E, F , G, H Material: Polyacetal Color: Black only Base Material: Polyester Base Color: Black Polyamide Tip Colors: A, B, C, E, F , G, H B AT4103 Small Color Tipped C AT4104 Large Color Tipped PANEL CUTOUTS & MAXIMUM EFFECTIVE PANEL THICKNESS TYPICAL SWITCH DIMENSIONS MRY • Turret Terminals Single Pole MRT • Solder Lug Terminals Double Pole MRY106 MRT22 PC FOOTPRINTS FOR MRX SINGLE, DOUBLE, & FOUR POLE Maximum Effective Panel Thickness With Standard Hardware: MRX & MRY .095” (2.4mm); MRT .106” (2.7mm) Without Locking Ring: MRX & MRY .126” (3.2mm); MRT .138” (3.5mm) (6.35) Dia .250 (5.6) .220 (0.6) .024 (6.35) Dia .250 (6.5) .256 (2.2) Dia .087 (3.15) Dia .124 Keyway 18° (5.6) .220 (1.0) .039 (16.9) .665 (20.0) .787 (2.3) .091 (1.3) Dia Typ .051 (5.0) .197 (8.0) .315 M6 P0.75 ACOM 4 3 60° Typ (14.0) Dia .551 3 2 1 (4.0) .157 M6 P0.75 Keyway (20.0) .787 (7.5) .295 (8.5) .335 (12.0) .472 (1.1) x (2.0) Typ .043 x .079 (3.15) Dia .124 (24.0) .945 654 (13.0) .512 (4.5) .177 (5.0) .197 (2.3) .091120° (4.5) Dia .177 (1.32) Dia Typ .052 (1.98) Dia Typ .078 A (10.0) Dia .394 45°Typ 22.5° C D 90°Typ B (4.5) Dia .177 (1.32) Dia Typ .052 (1.98) Dia Typ .078 A (10.0) Dia .394 45°Typ 22.5° B (4.5) Dia .177 (1.32) Dia Typ .052 (1.98) Dia .078 A (10.0) Dia .394 45°Typ 22.5° 60°Typ (1.85) Dia Typ .073 (9.0) Dia .354 A Single Pole Double Pole Four Pole Without Keyway With Keyway