MRFIC1801 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MRFIC1801MOTOROLA RF DEVICE DATA The MRFIC Line /C0049/C0046/C0056 /C0071/C0072/C0122 /C0065/C0110/C0116/C0101/C0110/C0110/C0097 /C0083/C0119/C0105/C0116/C0099/C0104 Designed primarily for use in DECT, Japan Personal Handy System (PHS), other wireless Personal Communication Systems (PCS) applications, and 2.4 GHz ISM band applications. The MRFIC1801 is a single pole, double throw reflective antenna switch featuring low insertion loss and high power handling capability in a low-cost SOIC-8 package. The integrated circuit requires no off-chip matching and provides for easy control circuit interface. The high power handling capability allows application in higher power wireless systems than traditional GaAs antenna switches. Together with the rest of the MRFIC180X series, this GaAs IC family offers the complete transmit and receive functions, less LO and filters, needed for a typical 1.8 GHz cordless telephone.

  • Usable Frequency Range 1.5 to 2.5 GHz
  • High 1.0 dB Compression Point = 29 dBm (Typ)
  • Low Transmit Insertion Loss = 0.75 dB (Typ)
  • High Transmit to Receive Isolation = 22 dB (Typ)
  • Single Control Pin for Easy Switching Signal Interface
  • Low Current Drain = 300 µA (Typ) in TX, 45 µA (Typ) in RX
  • Low Cost Surface Mount Plastic Package
  • Order MRFIC1801R2 for Tape and Reel. R2 Suffix = 2,500 Units per 12 mm, 13 inch Reel.
  • Device Marking = M1801 Functional Block Diagram and Pin Assignment 39 pF 39 pF 100 pFRX VC VSS TX 39 pF VDD ANTENNA 100 pF PIN 14321 5678 Order this document by MRFIC1801/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0082/C0070/C0073/C0067/C0049/C0056/C0048/C0049

1.8 GHz

CASE 751–05 (SO-8)  Motorola, Inc. 1997 REV 2

local Motorola Distributor or Sales Office. V and VSS = –2.5 V, but a negative VSS is not required. VSS can be grounded. Table 1. Logic Table

CASE 751–05 ISSUE S SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.18 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MRFIC1801/D◊