MRFIC0970 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Ordering Information
Package Information
(QFN-20) (Scale 2:1) Definitive Data: Motorola reserves the right to change the Produc tion detail specifications as may be required to permit improvements in the design of its produc t. © Motorola, Inc., 2002. All rights reserved. The MRFIC0970 is a single supply, RF power amplifier designed for the 2.0 W GSM900 handheld radios. The device is packaged in the QFN-20 package, with exposed backside pad, which allows excellent electrical and thermal performance through a solderable contact.
- Target 3.2 V Characteristics: RF Output Power: 34.5 dBm Typical Efficiency: 50% Typical Single Positive Supply Solution Available in Tape and Reel only. R2 Suffix = 2500 Units per 12 mm, 13 inch Reel Technical Data MRFIC0970/D Rev. 0, 07/2002
3.2 V GSM GaAs
iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...
2 MRFIC0970 Technical Data MOTOROLA
Electrical Characteristics
Figure 1. Functional Block Diagram
1 Electrical Characteristics
Table 1. Maximum Ratings NOTES: 1. Maximum Ratings are those values beyond which damage to the device may occur. or Recommended Operating Conditions tables.
2 ESD (electrostatic discharge) immunity meets Human Body Model (HBM) ≤250 V and
Machine Model (MM) ≤60 V. This device is rated Moisture Sensitivity Level (MSL) 1. Additional ESD data available upon request. Table 2. Recommended Operating Conditions Freescale Semiconductor, Inc.
MOTOROLA MRFIC0970 Technical Data 3 Table 3. Electrical Specifications Freescale Semiconductor, Inc.
4 MRFIC0970 Technical Data MOTOROLA
2 Pin Connections
Figure 2. Pin Connections
3 Typical Performance Characteristics
Figure 3. Output Power versus Frequency Freescale Semiconductor, Inc.
6 MRFIC0970 Technical Data MOTOROLA
4 Application Schematic
Figure 7. Application Schematic Freescale Semiconductor, Inc.
5 Packaging
Figure 8. Outline Dimensions for QFN-20
1.0 BACKSIDE
- DIMENSIONS ARE IN MILLIMETERS.
- DIMENSIONS AND TOLERANCES PER ASME
- THE COMPLETE JEDEC DESIGNATOR FOR THIS PACKAGE
- CORNER CHAMFER MAY NOT BE PRESENT. DIMENSIONS
OF OPTIONAL FEATURES ARE FOR REFERENCE ONLY.
- COPLANARITY APPLIES TO LEADS, CORNER LEADS, AND
- FOR ANVIL SINGULATED QFN PACKAGES, MAXIMUM
Freescale Semiconductor, Inc.
HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217 1-303-675-2140 or 1-800-441-2447 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1, Minami-Azabu Minato-ku, Tokyo 106-8573 Japan 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 TECHNICAL INFORMATION CENTER: 1-800-521-6274 HOME PAGE: http://www.motorola.com/semiconductors Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. ìTypicalî parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including ìTypicalsî must be validated for each customer application by customerís technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. © Motorola, Inc. 2002 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...