MRFG35010AR1 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 20
Technical content
Designed for WiMAX, WLL/MMDS or UMTS driver and final applications. use in Class AB or Class A linear base station applications.
- Typical Single-Carrier W-CDMA Performance: V DD = 12 Volts, IDQ = 140 mA, Pout = 1 Watt Avg., f = 3550 MHz, Channel Bandwidth = 3.84 MHz, PAR = 8.5 dB @ 0.01% Probability on CCDF. Power Gain 10 dB Drain Efficiency 25% ACPR @ 5 MHz Offset -43 dBc in 3.84 MHz Channel Bandwidth
- 10 Watts P1dB @ 3550 MHz, CW
- Excellent Phase Linearity and Group Delay Characteristics
- High Gain, High Efficiency and High Linearity
- RoHS Compliant
- In Tape and Reel. R1 Suffix = 500 Units per 32 mm, 13 inch Reel.
Table 1. Maximum Ratings Table 2. Thermal Characteristics
- For reliable operation, the operating channel temperature should not exceed 150 °C.
Select Documentation/Application Notes - AN1955.
3.5 GHz, 10 W, 12 V
© Freescale Semiconductor, Inc., 2006. All rights reserved.
Table 3. Electrical Characteristics (TC = 25°C unless otherwise noted) 8.5 dB @ 0.01% Probability on CCDF.
- Measurements made with device in test fixture.
Figure 1. 3.5 GHz Test Circuit Schematic Table 4. 3.5 GHz Test Circuit Component Designations and Values
Figure 2. 3.5 GHz Test Circuit Component Layout
Figure 3. Single-Carrier W-CDMA Power Gain Figure 4. Single-Carrier W-CDMA ACPR and NOTE: All data is referenced to package lead interface. ΓS and ΓL are the impedances presented to the DUT. All data is generated from load pull, not from the test circuit shown.
3.84 MHz Channel Bandwidth
Figure 7. Series Equivalent Source and Load Impedance
Table 5. Class AB Common Source S-Parameters (V DD = 12 Vdc, IDQ = 1000 mA, TC = 25°C, 50 ohm system)
Table 6. Class AB Common Source S-Parameters (V DD = 12 Vdc, IDQ = 140 mA, TC = 25°C, 50 ohm system)
G E N (LID) C SEATING PLANE DIM A MIN MAX MIN MAX MILLIMETERS .795 .805 20.19 20.45 INCHES B .225 .235 5.72 5.97 C .125 .176 3.18 4.47 D .034 .044 0.89 1.12 E .055 .065 1.40 1.65 F .004 .006 0.10 0.15 G .562 BSC 14.28 BSC H .077 .087 1.96 2.21 K .085 .115 2.16 2.92 M .355 .365 9.02 9.27 N .355 .365 9.96 10.16 STYLE 1: PIN 1. GATE 2. DRAIN 3. SOURCE Q 2 x MAMbbb B MT NOTES: 1. CONTROLLING DIMENSION: INCH. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M−1994. 3. DIMENSION H IS MEASURED .030 (0.762) AWAY FROM PACKAGE BODY. Q .125 .135 3.18 3.43 R .225 .235 5.72 5.97 S .225 .235 5.72 5.97 aaa bbb ccc .005 0.13 .010 0.25 .015 0.38 MAMbbb B MT S (INSULATOR)K 2 x B (FLANGE) D 2 x MAMbbb B MT B MAMccc B MT H R (LID) F MAMccc B MT T AA M MAMaaa B MT (INSULATOR) NI-360HF
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRFG35010A Rev. 1, 6/2006