MRFE6VP5150N NXP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 25
Technical content
Features
Wide Operating Frequency Range Extreme Ruggedness Unmatched Input and Output Allowing Wide Frequency Range Utilization Integrated Stability Enhancements Low Thermal Resistance Integrated ESD Protection Circuitry In Tape and Reel. R1 Suffix = 500 Units, 44 mm Tape Width, 13- -inch Reel. Document Number: MRFE6VP5150N Rev. 1, 7/2014 Freescale Semiconductor Technical Data 1.8–600 MHz, 150 W CW, 50 V WIDEBAND RF POWER LDMOS TRANSISTORS MRFE6VP5150NR1 MRFE6VP5150GNR1 (Top View) Drain A32 Figure 1. Pin Connections
41 Drain B
the source terminal for the transistors. Freescale Semiconductor, Inc., 2014.All rights reserved.
Freescale Semiconductor, Inc. Table 1. Maximum Ratings Table 2. Thermal Characteristics Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted)
- Continuous use at maximum temperature will affect MTTF.
- MTTF calculator available at http://www.freescale.com/rf
MTTF calculators by product. Select Documentation/Application Notes - - AN1955.
- Each side of device measured separately.
Freescale Semiconductor, Inc. Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted)(continued)
230 Pulse
0.62 Peak
50 No Device Degradation
- Each side of device measured separately.
- Measurements made with device in straight leadconfiguration before any lead forming operation is applied. Lead forming is used for gull wing
Freescale Semiconductor, Inc. Figure 2. Capacitance versus Drain- -Source Voltage Note: Each side of device measured separately. Figure 3. Normalized VGS versus Quiescent Figure 4. MTTF versus Junction Temperature - - CW under indicated test conditions.
4.14 Amps
4.97 Amps
Freescale Semiconductor, Inc.
230 MHz NARROWBAND PRODUCTION TEST FIXTURE
Figure 5. MRFE6VP5150NR1 Narrowband TestCircuit Component Layout — 230 MHz
Freescale Semiconductor, Inc. Table 6. MRFE6VP5150NR1 Narrowband Test Circuit Component Designations and Values — 230 MHz
Freescale Semiconductor, Inc. Figure 6. MRFE6VP5150NR1 Narrowband Test Circuit Schematic — 230 MHz Table 7. MRFE6VP5150NR1 Narrowband Test Circuit Microstrips — 230 MHz
Freescale Semiconductor, Inc. gate to gate, balanced configuration. drain to drain, balanced configuration. Figure 12. Narrowband Series Equivalent Source and Load Impedance — 230 MHz
Freescale Semiconductor, Inc. Table 8. 87.5–108 MHz Broadband Performance(In Freescale Reference Circuit, 50 ohm system) Table 9. Load Mismatch/Ruggedness(In Freescale Reference Circuit, 50 ohm system) IDQ(A+B) = 100 mA
98 CW > 65:1
50 No Device
Freescale Semiconductor, Inc. Figure 13. MRFE6VP5150NR1 Broadband Reference Circuit Component Layout — 87.5–108 MHz
Freescale Semiconductor, Inc. Table 10. MRFE6VP5150NR1 BroadbandReference Circuit Component Designations and Values — 87.5–108 MHz
24 AWG 1 Turn Primary, 24 AWG 1 Turn
2861000102 Fair-Rite
Freescale Semiconductor, Inc. Table 11. MRFE6VP51510NR1 Broadband Reference Circuit Microstrips — 87.5–108 MHz Figure 14. MRFE6VP5150NR1 Broadband Reference Circuit Schematic — 87.5–108 MHz
Freescale Semiconductor, Inc. Figure 15. Power Gain, Drain Efficiency and CW Output Figure 16. CW Output Power versus Gate- -Source
87.5 MHz
98 MHz
Figure 17. CW Output Power versus Gate- -Source
Freescale Semiconductor, Inc. Figure 18. CW Output Power versus Input Power Figure 19. Power Gain and Drain Efficiency
108 MHz
Freescale Semiconductor, Inc. gate to gate, balanced configuration. from drain to drain, balanced configuration. Figure 20. Broadband Series Equivalent Source and Load Impedance — 87.5–108 MHz
Freescale Semiconductor, Inc. Figure 21. 100 MHz Harmonics @ 150 W
Freescale Semiconductor, Inc. MRFE6VP5150NR1 MRFE6VP5150GNR1 PACKAGE DIMENSIONS
MRFE6VP5150NR1 MRFE6VP5150GNR1 RF Device Data Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MRFE6VP5150NR1 MRFE6VP5150GNR1
MRFE6VP5150NR1 MRFE6VP5150GNR1 RF Device Data Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MRFE6VP5150NR1 MRFE6VP5150GNR1
MRFE6VP5150NR1 MRFE6VP5150GNR1 RF Device Data Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MRFE6VP5150NR1 MRFE6VP5150GNR1 PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following resources to aid your design process. Application Notes AN1955: Thermal Measurement Methodology of RF Power Amplifiers AN1643: RF LDMOS Power Modules for GSM Base Station Application: Optimum Biasing Circuit Engineering Bulletins EB212: Using Data Sheet Impedances for RF LDMOS Devices Software Electromigration MTTF Calculator RF High Power Model Development Tools Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description
0 May 2014 Initial Release of Data Sheet
1 July 2014 Table 10, Broadband Reference Circuit ComponentDesignations and Values — 87.5–108 MHz: updated R 2 ,R 9a n dR 1 0r e s i s t o r s ,p .1 2
MRFE6VP5150NR1 MRFE6VP5150GNR1 RF Device Data Freescale Semiconductor, Inc. Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., respective owners. E 2014 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MRFE6VP5150N Rev. 1, 7/2014