MRF7S38010H FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
Features
- Characterized with Series Equivalent Large-Signal Impedance Parameters
- Internally Matched for Ease of Use
- Integrated ESD Protection
- Greater Negative Gate-Source Voltage Range for Improved Class C Operation
- RoHS Compliant
- In Tape and Reel. R3 Suffix = 250 Units per 32 mm, 13 inch Reel.
Table 1. Maximum Ratings Table 2. Thermal Characteristics
- Continuous use at maximum temperature will affect MTTF.
- MTTF calculator available at http://www.freescale.com/rf . Select Tools/Software/Application Software/Calculators to access the MTTF
Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2007. All rights reserved.
Table 3. ESD Protection Characteristics Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) 0.5 MHz Channel Bandwidth @ ±5.25 MHz Offset.
- Part internally matched both on input and output.
Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued) Mask System Type G @ Pout = 2 W Avg.
Figure 1. MRF7S38010HR3(HSR3) Test Circuit Schematic Table 5. MRF7S38010HR3(HSR3) Test Circuit Component Designations and Values
Figure 2. MRF7S38010HR3(HSR3) Test Circuit Component Layout
Figure 7. Intermodulation Distortion Products Figure 8. Intermodulation Distortion Products Figure 9. WiMAX, ACPR, Power Gain and Drain Figure 10. Power Gain and Drain Efficiency Figure 11. Power Gain versus Output Power
4 Bursts, 7 MHz Channel
Figure 12. MTTF versus Junction Temperature is operated at VDD = 30 Vdc, Pout = 2 W Avg., and ηD = 17%. Figure 13. OFDM 802.16d Test Signal
7 MHz
Figure 14. WiMAX Spectrum Mask Specifications
Figure 15. Series Equivalent Source and Load Impedance
MRF7S38010HR3 MRF7S38010HSR3 PACKAGE DIMENSIONS
MRF7S38010HR3 MRF7S38010HSR3 RF Device Data Freescale Semiconductor
MRF7S38010HR3 MRF7S38010HSR3
MRF7S38010HR3 MRF7S38010HSR3 RF Device Data Freescale Semiconductor
MRF7S38010HR3 MRF7S38010HSR3 PRODUCT DOCUMENTATION Refer to the following documents to aid your design process. Application Notes
- AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins
- EB212: Using Data Sheet Impedances for RF LDMOS Devices
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description 0 Aug. 2007 • Initial Release of Data Sheet
MRF7S38010HR3 MRF7S38010HSR3 RF Device Data Freescale Semiconductor Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF7S38010H Rev. 0, 8/2007