MRF7S21110H NXP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

Features

  • 100% PAR Tested for Guaranteed Output Power Capability
  • Characterized with Series Equivalent Large- -Signal Impedance Parameters
  • Internally Matched for Ease of Use
  • Integrated ESD Protection
  • Greater Negative Gate- -Source Voltage Range for Improved Class C Operation
  • Designed for Digital Predistortion Error Correction Systems
  • RoHS Compliant
  • In Tape and Reel. R3 Suffix = 250 Units, 56 mm Tape Width, 13 inch Reel.

Table 1. Maximum Ratings Table 2. Thermal Characteristics

  1. Continuous use at maximum temperature will affect MTTF.
  2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF

Select Documentation/Application Notes - - AN1955. © Freescale Semiconductor, Inc., 2007- -2008, 2011.All rights reserved.

Table 3. ESD Protection Characteristics Table 4. Electrical Characteristics(TA =2 5°C unless otherwise noted) Channel Bandwidth @±5M H zO f f s e t .

  1. Part internally matched both on input and output.

Table 4. Electrical Characteristics(TA =2 5°C unless otherwise noted)(continued)

Figure 1. MRF7S21110HR3(HSR3) Test Circuit Schematic Table 5. MRF7S21110HR3(HSR3) Test Circuit Component Designations and Values

Figure 2. MRF7S21110HR3(HSR3) Test Circuit Component Layout

Figure 12. Power Gain versus Output Power Figure 13. CCDF W- -CDMA IQ Magnitude Channel Bandwidth @±5M H zO f f s e t .

3.84 MHz

Figure 14. Single- -Carrier W- -CDMA Spectrum

Figure 15. Series Equivalent Source and Load Impedance

MRF7S21110HR3 MRF7S21110HSR3 PACKAGE DIMENSIONS

MRF7S21110HR3 MRF7S21110HSR3 RF Device Data Freescale Semiconductor

MRF7S21110HR3 MRF7S21110HSR3

MRF7S21110HR3 MRF7S21110HSR3 RF Device Data Freescale Semiconductor

MRF7S21110HR3 MRF7S21110HSR3 PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following documents and software to aid your design process. Application Notes

  • AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins
  • EB212: Using Data Sheet Impedances for RF LDMOS Devices Software
  • Electromigration MTTF Calculator
  • RF High Power Model For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description 0 Sept. 2007 • Initial Release of Data Sheet 1 July 2008 • Added Input Signal in front of PAR for consistency throughout data sheet p. 2, 6, 7, 8

  • Corrected Table 4, Typical Performances, Output Power Variation over Temperature value from 0.276 to 0.028, p. 3
  • Updated Fig. 14, CCDF W- -CDMA 3GPP, Test Model 1,64 DPCH, 50% Clipping, Single- -Carrier Test Signal, to better representproduction test signal, p. 8 2 Mar. 2011 • Modified data sheet to reflect RF Test Reduction described in Product and Process Change Notification number, PCN13628, p. 1, 2
  • Fig. 13, MTTF versus Junction Temperature removed, p. 8. Refer to the device’s MTTF Calculator available at freescale.com/RFpower. Go to Design Resources > Software and Tools.
  • Fig. 14, CCDF W- -CDMA IQ Magnitude Clipping, Single- -Carrier Test Signal and Fig. 15, Single- -Carrier W- -CDMA Spectrum updated to show the undistorted input test signal, p. 8 (renumbered as Figs. 13 and 14 respectively after Fig. 13 removed)
  • Added Electromigration MTTF Calculator and RF High Power Model availability to Product Software, p. 14

MRF7S21110HR3 MRF7S21110HSR3 RF Device Data Freescale Semiconductor Information in this document is provided solely to enablesystem and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its productsfor any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and allliability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components insystems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributorsharmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007- -2008, 2011. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) + 3 316 93 54 84 8( F r e n c h ) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1- -8- -1, Shimo- -Meguro, Meguro- -ku, Tokyo 153- -0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF7S21110H Rev. 2, 3/2011