MRF6S21100HR3 FREESCALE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Features

  • Characterized with Series Equivalent Large-Signal Impedance Parameters
  • Internally Matched for Ease of Use
  • Qualified Up to a Maximum of 32 VDD Operation
  • Integrated ESD Protection
  • Designed for Lower Memory Effects and Wide Instantaneous Bandwidth

Applications

  • RoHS Compliant
  • In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel.

Table 1. Maximum Ratings Table 2. Thermal Characteristics

  1. MTTF calculator available at http://www.freescale.com/rf . Select Tools/Software/Application Software/Calculators to access

the MTTF calculators by product. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2007. All rights reserved.

Table 3. ESD Protection Characteristics Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted)

  1. Part is internally matched both on input and output.

Figure 1. MRF6S21100HR3(SR3) Test Circuit Schematic Table 5. MRF6S21100HR3(SR3) Test Circuit Component Designations and Values

Figure 2. MRF6S21100HR3(SR3) Test Circuit Component Layout

2.1 GHz

Figure 3. 2-Carrier W-CDMA Broadband Performance @ P out = 23 Watts Avg.

3.84 MHz Channel Bandwidth

10 MHz Carrier Spacing

Figure 4. 2-Carrier W-CDMA Broadband Performance @ P out = 55 Watts Avg. Figure 5. Two-Tone Power Gain versus Figure 6. Third Order Intermodulation Distortion

Figure 7. Intermodulation Distortion Products Figure 8. Pulsed CW Output Power versus Pout, OUTPUT POWER (WATTS) AVG. Figure 9. 2-Carrier W-CDMA ACPR, IM3, Figure 10. Power Gain and Drain Efficiency Figure 11. Power Gain versus Output Power

Figure 12. MTTF versus Junction Temperature is operated at VDD = 28 Vdc, Pout = 23 W Avg., and ηD = 27.6%. Figure 13. CCDF W-CDMA 3GPP , Test Model 1,

64 DPCH, 67% Clipping, Single-Carrier Test Signal

Figure 14. 2-Carrier W-CDMA Spectrum

3.84 MHz

3.84 MHz BW

Figure 15. Series Equivalent Source and Load Impedance

Figure 16. MRF6S21100HR3(SR3) Test Circuit Schematic — TD-SCDMA Table 6. MRF6S21100HR3(SR3) Test Circuit Component Designations and Values — TD-SCDMA

Figure 17. MRF6S21100HR3(SR3) Test Circuit Component Layout — TD-SCDMA

Pout, OUTPUT POWER (WATTS) AVG. Figure 18. 3-Carrier TD-SCDMA ACPR, ALT and Pout, OUTPUT POWER (WATTS) AVG. Figure 19. 6-Carrier TD-SCDMA ACPR, ALT and Figure 20. 3-Carrier TD-SCDMA Spectrum

1.28 MHz

Figure 21. 6-Carrier TD-SCDMA Spectrum

1.28 MHz BW

Figure 22. Series Equivalent Source and Load Impedance — TD-SCDMA

MRF6S21100HR3 MRF6S21100HSR3 RF Device Data Freescale Semiconductor PACKAGE DIMENSIONS CASE 465-06 ISSUE G NI-780 MRF6S21100HR3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.335 1.345 33.91 34.16 B 0.380 0.390 9.65 9.91 C 0.125 0.170 3.18 4.32 D 0.495 0.505 12.57 12.83 E 0.035 0.045 0.89 1.14 F 0.003 0.006 0.08 0.15 G 1.100 BSC 27.94 BSC H 0.057 0.067 1.45 1.70 K 0.170 0.210 4.32 5.33 N 0.772 0.788 19.60 20.00 Q .118 .138 3.00 3.51 R 0.365 0.375 9.27 9.53 STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE D G K C E H S F S 0.365 0.375 9.27 9.52 M 0.774 0.786 19.66 19.96 aaa 0.005 REF 0.127 REF bbb 0.010 REF 0.254 REF ccc 0.015 REF 0.381 REF Q2X MAMbbb B MT MAMbbb B MT B B (FLANGE) SEATING PLANE MAMccc B MT MAMbbb B MT AA (FLANGE) T N (LID) M (INSULATOR) MAMaaa B MT (INSULATOR) R MAMccc B MT (LID) CASE 465A-06 ISSUE H NI-780S MRF6S21100HSR3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.805 0.815 20.45 20.70 B 0.380 0.390 9.65 9.91 C 0.125 0.170 3.18 4.32 D 0.495 0.505 12.57 12.83 E 0.035 0.045 0.89 1.14 F 0.003 0.006 0.08 0.15 H 0.057 0.067 1.45 1.70 K 0.170 0.210 4.32 5.33 M 0.774 0.786 19.61 20.02 R 0.365 0.375 9.27 9.53 STYLE 1: PIN 1. DRAIN 2. GATE 5. SOURCE D K C E H F U (FLANGE) Z (LID) bbb 0.010 REF 0.254 REF ccc 0.015 REF 0.381 REF aaa 0.005 REF 0.127 REF S 0.365 0.375 9.27 9.52 N 0.772 0.788 19.61 20.02 MAMbbb B MT B B (FLANGE) SEATING PLANE MAMccc B MT MAMbbb B MT A A (FLANGE) T N (LID) M (INSULATOR) MAMccc B MT MAMaaa B MT R (LID) S (INSULATOR)

MRF6S21100HR3 MRF6S21100HSR3 PRODUCT DOCUMENTATION Refer to the following documents to aid your design process. Application Notes

  • AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins
  • EB212: Using Data Sheet Impedances for RF LDMOS Devices

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description 7 Jan. 2007 • Added “TD-SCDMA” to data sheet description paragraph, p. 1

  • Removed Lower Thermal Resistance and Low Gold Plating bullets from Features section as functionality is standard, p. 1
  • Removed Forward Transconductance from On Characteristics table as it no longer provided usable information, p. 2
  • Updated Part Numbers in Table 5, Component Designations and Values, to RoHS compliant part numbers, p. 3
  • Adjusted scale for Fig. 5, Two-Tone Power Gain versus Output Power, to better match the device’s capabilities, p. 5
  • Removed lower voltage tests from Fig. 11, Power Gain versus Output Power, due to fixed tuned fixture limitations, p. 6
  • Replaced Fig. 12, MTTF versus Junction Temperature with updated graph. Removed Amps2 and listed operating characteristics and location of MTTF calculator for device, p. 7
  • Added TD-SCDMA test circuit schematic, component designations and values, component layout, typical characteristic curves, test signal and series impedance, p. 9-12
  • Added Product Documentation and Revision History, p. 14

MRF6S21100HR3 MRF6S21100HSR3 RF Device Data Freescale Semiconductor Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center

2 Dai King Street

Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF6S21100H Rev. 7, 1/2007