MRF5S19090LR3 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 12

Technical content

Freescale Semiconductor, Inc. MRF5S19090LR3 and MRF5S19090LSR3 replaced by MRF5S19090HR3 and MRF5S19090HSR3. “H” suffix indicates lower thermal resistance package. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3MOTOROLA RF DEVICE DATA 1For More Information On This Product, Go to: www.freescale.com The RF MOSFET Line RF Power Field Effect Transistors N-Channel Enhancement-Mode Lateral MOSFETs Designed for PCN and PCS base station applications with frequencies up to 1.9 to 2.0 GHz. Suitable for TDMA, CDMA and multicarrier amplifier applications.

  • Typical 2-Carrier N-CDMA Performance for V DD = 28 Volts, IDQ = 850 mA, f1 = 1958.75 MHz, f2 = 1961.25 MHz IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 1.2288 MHz Channel Bandwidth Carrier. Adjacent Channels Measured over a 30 kHz Bandwidth at f1 -885 kHz and f2 +885 kHz. Distortion Products Measured over 1.2288 MHz Bandwidth at f1 -2.5 MHz and Output Power — 18 Watts Avg. Power Gain — 14.5 dB Efficiency — 25.8% ACPR — -51 dB IM3 — -37 dBc
  • Internally Matched, Controlled Q, for Ease of Use
  • High Gain, High Efficiency and High Linearity
  • Integrated ESD Protection
  • Designed for Maximum Gain and Insertion Phase Flatness
  • Capable of Handling 10:1 VSWR, @ 28 Vdc, 1960 MHz,

90 Watts CW Output Power

  • Excellent Thermal Stability
  • Characterized with Series Equivalent Large-Signal Impedance Parameters
  • Qualified Up to a Maximum of 32 V DD Operation
  • Low Gold Plating Thickness on Leads. L Suffix Indicates 40 µ″ Nominal.
  • In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel. MAXIMUM RATINGS Rating Symbol Value Unit Drain-Source Voltage VDSS 65 Vdc Gate-Source Voltage VGS -0.5, +15 Vdc Total Device Dissipation @ TC = 25°C Derate above 25°C PD 261 1.49 Watts W/°C Storage Temperature Range Tstg - 65 to +200 °C Operating Junction Temperature TJ 200 °C THERMAL CHARACTERISTICS Characteristic Symbol Value (1,2) Unit Thermal Resistance, Junction to Case Case Temperature 80°C, 90 W CW Case Temperature 80°C, 18 W CW RθJC 0.67 0.75 °C/W (1) MTTF calculator available at http://www.motorola.com/semiconductors/rf . Select Tools/Software/Application Software/Calculators to access the MTTF calculators by product. (2) Refer to AN1955/D, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.motorola.com/semiconductors/rf Select Documentation/Application Notes - AN1955. NOTE - CAUTION - MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed. Order this document by MRF5S19090L/D MOTOROLA SEMICONDUCTOR TECHNICAL DATA MRF5S19090LR3 MRF5S19090LSR3 1990 MHz, 18 W AVG., 2 x N-CDMA, 28 V LATERAL N-CHANNEL RF POWER MOSFETs CASE 465-06, STYLE 1 NI-780 MRF5S19090LR3 CASE 465A-06, STYLE 1 NI-780S MRF5S19090LSR3  Motorola, Inc. 2004 For More Information On This Product, Go to: www.freescale.com REV 1

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com ESD PROTECTION CHARACTERISTICS Test Conditions Class Human Body Model 1 (Minimum) Machine Model M3 (Minimum) Charge Device Model C7 (Minimum) ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Leakage Current (VDS = 65 Vdc, VGS = 0 Vdc) IDSS — — 10 µAdc Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) IDSS — — 1 µAdc Gate-Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) IGSS — — 1 µAdc ON CHARACTERISTICS (DC) Gate Threshold Voltage (VDS = 10 Vdc, ID = 200 µAdc) VGS(th) 2.5 2.7 3.5 Vdc Gate Quiescent Voltage (VDS = 28 Vdc, ID = 850 mAdc) VGS(Q) — 3.7 — Vdc Drain-Source On-Voltage (VGS = 10 Vdc, ID = 2 Adc) VDS(on) — 0.26 — Vdc Forward Transconductance (VDS = 10 Vdc, ID = 2 Adc) gfs — 5 — S DYNAMIC CHARACTERISTICS Reverse Transfer Capacitance (1) (VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss — 1.7 — pF FUNCTIONAL TESTS (In Motorola Test Fixture, 50 ohm system) 2-Carrier N-CDMA, 1.2288 MHz Channel Bandwidth Carriers. ACPR Common-Source Amplifier Power Gain (VDD = 28 Vdc, Pout = 18 W Avg., IDQ = 850 mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz) Gps 13.5 14.5 — dB Drain Efficiency (VDD = 28 Vdc, Pout = 18 W Avg., IDQ = 850 mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz) η 24 25.8 — % Third Order Intermodulation Distortion (VDD = 28 Vdc, Pout = 18 W Avg., IDQ = 850 mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz); IM3 measured over 1.2288 MHz bandwidth at f1 -2.5 MHz and f2 = +2.5 MHz) IM3 — -37 -35 dBc Adjacent Channel Power Ratio (VDD = 28 Vdc, Pout = 18 W Avg., IDQ = 850 mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz); ACPR measured over 30 kHz bandwidth at f1 -885 kHz and f2 +885 kHz) ACPR — -51 -48 dBc Input Return Loss (VDD = 28 Vdc, Pout = 18 W Avg., IDQ = 850 mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 =1990 MHz) IRL — -14.5 -9 dB (1) Part is internally matched both on input and output.

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 1. MRF5S19090 Test Circuit Schematic Table 1. MRF5S19090 Test Circuit Component Designations and Values

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 2. MRF5S19090 Test Circuit Component Layout

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 3. 2-Carrier N-CDMA Broadband PerformanceG ps, POWER GAIN (dB)

1.2288 MHz Channel Bandwidth

Figure 4. Two-Tone Power Gain versus Figure 5. Third Order Intermodulation Distortion Figure 6. Intermodulation Distortion Products Figure 7. Pulse CW Output Power versus

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Pout, OUTPUT POWER (WATTS) AVG. Figure 8. 2-Carrier N-CDMA ACPR, IM3, Power Gain Figure 9. 2-Carrier N-CDMA Spectrum Figure 10. MTBF Factor versus Junction TemperatureMTBF FACTOR (HOURS x AMPS )2 MTBF factor by ID2 for MTBF in a particular application.

1.2288 MHz

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. Figure 11. Series Equivalent Input and Output Impedance

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com NOTES

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3MOTOROLA RF DEVICE DATA 9For More Information On This Product, Go to: www.freescale.com NOTES

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com NOTES

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3MOTOROLA RF DEVICE DATA 11For More Information On This Product, Go to: www.freescale.com PACKAGE DIMENSIONS CASE 465-06 ISSUE F NI-780 MRF5S19090LR3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.335 1.345 33.91 34.16 B 0.380 0.390 9.65 9.91 C 0.125 0.170 3.18 4.32 D 0.495 0.505 12.57 12.83 E 0.035 0.045 0.89 1.14 F 0.003 0.006 0.08 0.15 G 1.100 BSC 27.94 BSC H 0.057 0.067 1.45 1.70 K 0.170 0.210 4.32 5.33 N 0.772 0.788 19.60 20.00 Q .118 .138 3.00 3.51 R 0.365 0.375 9.27 9.53 STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE D G K C E H S F S 0.365 0.375 9.27 9.52 M 0.774 0.786 19.66 19.96 aaa 0.005 REF 0.127 REF bbb 0.010 REF 0.254 REF ccc 0.015 REF 0.381 REF Q2X MAMbbb B MT MAMbbb B MT B B (FLANGE) SEATING PLANE MAMccc B MT MAMbbb B MT AA (FLANGE) T N (LID) M (INSULATOR) MAMaaa B MT (INSULATOR) R MAMccc B MT (LID) CASE 465A-06 ISSUE F NI-780S MRF5S19090LSR3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M−1994. 2. CONTROLLING DIMENSION: INCH. 3. DELETED 4. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.805 0.815 20.45 20.70 B 0.380 0.390 9.65 9.91 C 0.125 0.170 3.18 4.32 D 0.495 0.505 12.57 12.83 E 0.035 0.045 0.89 1.14 F 0.003 0.006 0.08 0.15 H 0.057 0.067 1.45 1.70 K 0.170 0.210 4.32 5.33 M 0.774 0.786 19.61 20.02 R 0.365 0.375 9.27 9.53 STYLE 1: PIN 1. DRAIN 2. GATE 5. SOURCE D K C E H F U (FLANGE) Z (LID) bbb 0.010 REF 0.254 REF ccc 0.015 REF 0.381 REF aaa 0.005 REF 0.127 REF S 0.365 0.375 9.27 9.52 N 0.772 0.788 19.61 20.02 MAMbbb B MT B B (FLANGE) SEATING PLANE MAMccc B MT MAMbbb B MT A A (FLANGE) T N (LID) M (INSULATOR) MAMccc B MT MAMaaa B MT R (LID) S (INSULATOR)

Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. MRF5S19090LR3 MRF5S19090LSR3 MOTOROLA RF DEVICE DATA For More Information On This Product, Go to: www.freescale.com Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All oper ating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. /C0069 Motorola Inc. 2004 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, Motorola Literature Distribution 3-20-1, Minami-Azabu, Minato-ku, Tokyo 106-8573, Japan P.O. Box 5405, Denver, Colorado 80217 81-3- 3440-3569 1-800-521-6274 or 480-768-2130 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 HOME PAGE: http://motorola.com/semiconductors MRF5S19090L/D◊ For More Information On This Product, Go to: www.freescale.com