MRF5S19060NR1 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Features
- Characterized with Series Equivalent Large-Signal Impedance Parameters
- Internally Matched for Ease of Use
- Integrated ESD Protection
- 200°C Capable Plastic Package
- N Suffix Indicates Lead-Free Terminations. RoHS Compliant.
- In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel.
Table 1. Maximum Ratings Table 2. Thermal Characteristics
- MTTF calculator available at http://www.freescale.com/rf . Select Tools/Software/Application Software/Calculators to access
the MTTF calculators by product. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2006. All rights reserved.
Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted)
- Part is internally matched both on input and output.
Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued)
1 MHz to VBW, Δ IM3<2dB)
Figure 1. MRF5S19060NR1/NBR1 Test Circuit Schematic Table 6. MRF5S19060NR1/NBR1 Test Circuit Component Designations and Values
Figure 2. MRF5S19060NR1/NBR1 Test Circuit Component Layout no impact on form, fit or function of the current product.
2.5 MHz Tone Spacing
Figure 3. 2-Carrier N-CDMA Broadband Performance @ P out = 12 Watts Avg. Figure 4. 2-Carrier N-CDMA Broadband Performance @ P out = 30 Watts Avg. Figure 5. Two-Tone Power Gain versus Figure 6. Third Order Intermodulation Distortion
Figure 12. MTTF Factor versus Junction Temperature MTTF factor by ID2 for MTTF in a particular application. Figure 13. 2-Carrier CCDF N-CDMA Figure 14. 2-Carrier N-CDMA Spectrum
1.2288 MHz
Figure 15. Series Equivalent Source and Load Impedance
MRF5S19060NR1 MRF5S19060NBR1 NOTES
MRF5S19060NR1 MRF5S19060NBR1 RF Device Data Freescale Semiconductor NOTES
MRF5S19060NR1 MRF5S19060NBR1 PACKAGE DIMENSIONS CASE 1486-03 ISSUE C TO-270 WB-4 PLASTIC MRF5S19060NR1 DATUM PLANE BOTTOM VIEW PIN 5 NOTE 8 AB C H DRAIN LEAD D AMaaa C D2 NOTES: 1. CONTROLLING DIMENSION: INCH. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M−1994. 3. DATUM PLANE −H− IS LOCATED AT THE TOP OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE TOP OF THE PARTING LINE. 4. DIMENSIONS D" AND E1" DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS .006 PER SIDE. DIMENSIONS D" AND E1" DO INCLUDE MOLD MISMATCH AND ARE DETER− MINED AT DATUM PLANE −H−. 5. DIMENSION b1" DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .005 TOTAL IN EXCESS OF THE b1" DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. DATUMS −A− AND −B− TO BE DETERMINED AT DATUM PLANE −H−. 7. DIMENSION A2 APPLIES WITHIN ZONE J" ONLY. 8. HATCHING REPRESENTS THE EXPOSED AREA OF THE HEAT SLUG. F ZONE J A DIM A MIN MAX MIN MAX MILLIMETERS .100 .104 2.54 2.64 INCHES A1 .039 .043 0.99 1.09 A2 .040 .042 1.02 1.07 D .712 .720 18.08 18.29 D1 .688 .692 17.48 17.58 D2 .011 .019 0.28 0.48 E .551 .559 14 14.2 E1 .353 .357 8.97 9.07 E2 .132 .140 3.35 3.56 E3 .124 .132 3.15 3.35 F b1 .164 .170 4.17 4.32 c1 .007 .011 0.18 0.28 e .025 BSC .106 BSC
0.64 BSC
2.69 BSC
STYLE 1: PIN 1. DRAIN 2. DRAIN 3. GATE 4. GATE 5. SOURCE aaa .004 0.10 GATE LEAD e E SEATING PLANE ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ ÇÇÇÇÇÇ NOTE 7 E5 .346 .350 8.79 8.89
MRF5S19060NR1 MRF5S19060NBR1 RF Device Data Freescale Semiconductor
MRF5S19060NR1 MRF5S19060NBR1
MRF5S19060NR1 MRF5S19060NBR1 RF Device Data Freescale Semiconductor
MRF5S19060NR1 MRF5S19060NBR1 Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF5S19060N Rev. 6, 5/2006 RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb-free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescales Environmental Products program, go to http://www.freescale.com/epp.