MRF392 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MRF392MOTOROLA RF DEVICE DATA The RF Line /C0078/C0080/C0078 /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0080/C0117/C0115/C0104/C0045/C0080/C0117/C0108/C0108 /C0082/C0070 /C0080/C0111/C0119/C0101/C0114 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114 Designed primarily for wideband large–signal output and driver amplifier stages in the 30 to 500 MHz frequency range.

  • Specified 28 Volt, 400 MHz Characteristics — Output Power = 125 W Typical Gain = 10 dB Efficiency = 55% (Typ)
  • Built–In Input Impedance Matching Networks for Broadband Operation
  • Push–Pull Configuration Reduces Even Numbered Harmonics
  • Gold Metallization System for High Reliability
  • 100% Tested for Load Mismatch
  • Circuit board photomaster available upon request by contacting RF Tactical Marketing in Phoenix, AZ. 1, 45, 8 The MRF392 is two transistors in a single package with separate base and collector leads and emitters common. This arrangement provides the designer with a space saving device capable of operation in a push–pull configuration. PUSH–PULL TRANSISTORS MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO 30 Vdc Collector–Base Voltage VCBO 60 Vdc Emitter–Base Voltage VEBO 4.0 Vdc Collector Current — Continuous IC 16 Adc Total Device Dissipation @ TC = 25°C (1) Derate above 25°C PD 270 1.54 Watts W/°C Storage Temperature Range Tstg –65 to +150 °C Junction Temperature TJ 200 °C THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 0.65 °C/W NOTE: 1. This device is designed for RF operation. The total device dissipation rating applies only when the device is operated as an RF push–pull amplifier. Order this document by MRF392/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0082/C0070/C0051/C0057/C0050

125 W, 30 to 500 MHz

CONTROLLED “Q” BROADBAND PUSH–PULL RF POWER TRANSISTOR NPN SILICON CASE 744A–01, STYLE 1  Motorola, Inc. 1997 REV 8

  1. Each transistor chip measured separately.
  2. Both transistor chips operating in push–pull amplifier.

Figure 1. 400 MHz Test Fixture

Figure 2. Output Power versus Input Power Figure 3. Output Power versus Input Power Figure 4. Output Power versus Supply Voltage Figure 5. Output Power versus Supply Voltage Figure 6. Series Equivalent Input/Output Impedance

225 MHz 400 MHz

225 MHz

500 MHz

400 MHz

ZOL * = given output power, voltage and frequency. collector–to–collector respectively.

CASE 744A–01 ISSUE C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. STYLE 1: PIN 1. EMITTER (COMMON) 2. COLLECTOR 3. COLLECTOR 4. EMITTER (COMMON) 5. EMITTER (COMMON) 6. BASE 7. BASE 8. EMITTER (COMMON) –T– M K K L G F V Q 4 PL 2 PL U 4 PL D 4 PL R 56 78 12 34 –B– MAM0.76 (0.030) B M –A– SEATING PLANE N E C J H DIM MIN MAX MIN MAX INCHESMILLIMETERS A 22.60 23.11 0.890 0.910 B 9.52 10.03 0.375 0.395 C 6.65 7.16 0.262 0.282 D 1.60 1.95 0.063 0.077 E 2.94 3.40 0.116 0.134 F 2.87 3.22 0.113 0.127 G 16.51 BSC 0.650 BSC H 4.01 4.36 0.158 0.172 J 0.07 0.15 0.003 0.006 K 4.34 4.90 0.171 0.193 L 12.45 12.95 0.490 0.510 M 45 NOM 45 NOM N 1.051 11.02 0.414 0.434 Q 3.04 3.35 0.120 0.132 R 9.90 10.41 0.390 0.410 U 1.02 1.27 0.040 0.050 V 0.64 0.89 0.025 0.035 /C0095/C0095 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MRF392/D /C0042/C0077/C0082/C0070/C0051/C0057/C0050/C0047/C0068/C0042