MRF377HR3 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
Features
- Characterized with Series Equivalent Large-Signal Impedance Parameters
- Internally Matched for Ease of Use
- Device Designed for Push-Pull Operation Only
- Integrated ESD Protection
- Excellent Thermal Stability
- Lower Thermal Resistance Package
- Low Gold Plating Thickness on Leads, 40μ″ Nominal.
- RoHS Compliant
- In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel. R5 Suffix = 50 Units per 56 mm, 13 inch Reel.
Table 1. Maximum Ratings Table 2. Thermal Characteristics
- MTTF calculator available at http://www.freescale.com/rf. Select Tools/Software/Application Software/Calculators to access
the MTTF calculators by product. Select Documentation/Application Notes - AN1955. © Freescale Semiconductor, Inc., 2006. All rights reserved.
Table 3. ESD Protection Characteristics Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted)
- Each side of device measured separately.
- Part is internally matched both on input and output.
- Measurement made with device in push-pull configuration.
- Drains are tied together internally as this is a total device value.
Table 4. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued)
- Measurement made with device in push-pull configuration.
Table 5. 845-875 MHz Narrowband Test Circuit Component Designations and Values Figure 1. 845-875 MHz Narrowband Test Circuit Component Layout no impact on form, fit or function of the current product.
gate to gate, balanced configuration. from drain to drain, balanced configuration. Figure 7. 845-875 MHz Narrowband Series Equivalent Source and Load Impedance
Table 6. 470860 MHz Broadband Test Circuit Component Designations and Values
Figure 8. 470-860 MHz Broadband Test Circuit Component Layout no impact on form, fit or function of the current product.
Figure 9. Single-Channel DVBT OFDM
64 QAM Data Carrier Modulation
5 Symbols
Pout, OUTPUT POWER (WATTS) AVG. Figure 10. Single-Channel DVBT OFDM Broadband
470 MHz
660 MHz
560 MHz
860 MHz 760 MHz
Pout, OUTPUT POWER (WATTS) AVG. Figure 11. Single-Channel DVBT OFDM
860 MHz
760 MHz
Pout, OUTPUT POWER (WATTS) AVG. Figure 12. Single-Channel DVBT OFDM Broadband Performance
64 QAM
7.61 MHz
Figure 13. 8K Mode DVBT OFDM Spectrum
Figure 14. Single-Channel ATSC 8VSB Pout, OUTPUT POWER (WATTS) AVG. Figure 15. Single-Channel ATSC 8VSB Broadband Pout, OUTPUT POWER (WATTS) AVG. Figure 16. Single-Channel ATSC 8VSB Broadband
470 MHzVDD = 32 Vdc
Pout, OUTPUT POWER (WATTS) AVG. Figure 17. Single-Channel ATSC 8VSB Broadband Performance
560 MHz760 MHz
Figure 18. ATSC 8VSB Spectrum
3.25 MHz
Figure 19. 470860 MHz Broadband Series Equivalent Source and Load Impedance gate to gate, balanced configuration. from drain to drain, balanced configuration.
D Q G L K HE F C SEATING PLANE NOTES: 1. CONTROLLING DIMENSION: INCH. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M−1994. 3. DIMENSION H TO BE MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. 4. RECOMMENDED BOLT CENTER DIMENSION OF 1.140 (28.96) BASED ON 3M SCREW.4X B A T DIM A MIN MAX MIN MAX MILLIMETERS 1.335 1.345 33.91 34.16 INCHES B 0.380 0.390 9.65 9.91 C 0.180 0.224 4.57 5.69 D 0.325 0.335 8.26 8.51 E 0.060 0.070 1.52 1.78 F 0.004 0.006 0.10 0.15 G H 0.097 0.107 2.46 2.72 K 0.135 0.165 3.43 4.19 L N 0.851 0.869 21.62 22.07 Q 0.118 0.138 3.00 3.30 R 0.395 0.405 10.03 10.29 STYLE 1: PIN 1. DRAIN 2. DRAIN 3. GATE 4. GATE 5. SOURCE
1.100 BSC
0.425 BSC
27.94 BSC
10.8 BSC
J 0.2125 BSC 5.397 BSC M 0.852 0.868 21.64 22.05 S 0.394 0.406 10.01 10.31 bbb 0.010 REF 0.25 REF ccc 0.015 REF 0.38 REF MAMbbb B MT MAMbbb B MT B (FLANGE) MAMbbb B MT MAMccc B MT R (LID) S (INSULATOR) J MAMbbb B MT MAMccc B MT N (LID) M (INSULATOR) A NI-860C3
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF377H Rev. 1, 5/2006