MRF281SR1_06 FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- Excellent Thermal Stability
- Characterized with Series Equivalent Large-Signal Impedance Parameters
- S-Parameter Characterization at High Bias Levels
- RoHS Compliant
- Available in Tape and Reel. R1 Suffix = 500 Units per 12 mm, 7 inch Reel.
Table 1. Maximum Ratings Table 2. Thermal Characteristics Table 3. Electrical Characteristics (TC = 25°C unless otherwise noted) packaging MOS devices should be observed.
2000 MHz, 4 W, 26 V
© Freescale Semiconductor, Inc., 2006. All rights reserved.
Table 3. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued)
Figure 1. Series Equivalent Input and Output Impedance Zin = Complex conjugate of source impedance. IMD, bias current and frequency.
Table 4. Common Source S-Parameters at VDS = 26 Vdc, ID = 250 mAdc
C FE H K2X NOTES: 1. CONTROLLING DIMENSIONS: INCHES. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. ALL DIMENSIONS ARE SYMMETRICAL ABOUT CENTERLINE UNLESS OTHERWISE NOTED. STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE D2X Z4X DIM A MIN MAX MIN MAX MILLIMETERS 0.180 0.190 4.572 4.83 INCHES B 0.140 0.150 3.556 3.81 C 0.082 0.116 2.083 2.946 D 0.047 0.053 1.194 1.346 E 0.004 0.010 0.102 0.254 F 0.004 0.006 0.102 0.152 H 0.025 0.031 0.635 0.787 K 0.060 0.110 1.524 2.794 M 0.197 0.203 5.004 5.156 N 0.177 0.183 4.496 4.648 R 0.147 0.153 3.734 3.886 S 0.157 0.163 3.988 4.14 bbb 0.010 REF 0.254 REF ccc 0.015 REF 0.381 REF MAMbbb B MT MAMccc B MT MAMccc B MT R (LID) S (INSULATOR) SEATING PLANET MAMccc B MT N (LID) A A (FLANGE) M (INSULATOR) MAMccc B MT B B (FLANGE) CASE 458C-03 ISSUE D NI-200Z MRF281ZR1 CE K2X NOTES: 1. CONTROLLING DIMENSIONS: INCHES. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSION H (PACKAGE COPLANARITY): THE BOTTOM OF LEADS AND REFERENCE PLANE T MUST BE COPLANAR WITHIN DIMENSION H. STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE D2X Z4X Y F H DIM A MIN MAX MIN MAX MILLIMETERS 0.180 0.190 4.572 4.830 INCHES B 0.140 0.150 3.556 3.810 C 0.082 0.116 2.083 2.946 D 0.047 0.053 1.194 1.346 E 0.004 0.010 0.102 0.254 H 0.000 0.004 0.000 0.102 F 0.004 0.006 0.102 0.152 K 0.050 0.090 1.270 2.286 M 0.197 0.203 5.004 5.156 N 0.177 0.183 4.496 4.648 R 0.147 0.153 3.734 3.886 S 0.157 0.163 3.988 4.140 MAMbbb B MT MAMccc B MT MAMccc B MT R (LID) S (INSULATOR) B (FLANGE) MAMccc B MT N (LID) SEATING PLANETAA (FLANGE) M (INSULATOR) MAMccc B MT B Y 0.020 0.040 0.508 1.016 bbb .010 REF 0.254 REF ccc .015 REF 0.381 REF
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MRF281 Rev. 5, 5/2006