MRF240 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

MRF240MOTOROLA RF DEVICE DATA The RF Line /C0078/C0080/C0078 /C0083/C0105/C0108/C0105/C0099/C0111/C0110 /C0082/C0070 /C0080/C0111/C0119/C0101/C0114 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114/C0115 . . . designed for 13.6 volt VHF large–signal class C and class AB linear power amplifier applications in commercial and industrial equipment.

  • High Common Emitter Power Gain
  • Specified 13.6 V, 160 MHz Performance: Output Power = 40 Watts Power Gain = 9.0 dB Min Efficiency = 55% Min
  • Load Mismatch Capability at Rated Voltage and RF Drive
  • Silicon Nitride Passivated
  • Low Intermodulation Distortion, d3 = –30 dB Typ MAXIMUM RATINGS Rating Symbol Value Unit Collector–Emitter Voltage VCEO 16 Vdc Collector–Base Voltage VCBO 36 Vdc Emitter–Base Voltage VEBO 4.0 Vdc Collector Current — Continuous IC 8.0 Adc Total Device Dissipation @ TC = 25°C (1) Derate above 25°C PD 100 0.57 Watts W/°C Storage Temperature Range Tstg –65 to +150 °C THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case (2) R θJC 1.75 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector–Emitter Breakdown Voltage (IC = 20 mAdc, IB = 0) V(BR)CEO 16 — — Vdc Collector–Emitter Breakdown Voltage (IC = 20 mAdc, VBE = 0) V(BR)CES 36 — — Vdc Emitter–Base Breakdown Voltage (IE = 5.0 mAdc, IC = 0) V(BR)EBO 4.0 — — Vdc Collector Cutoff Current (VCB = 15 Vdc, IE = 0) ICBO — — 10 mAdc ON CHARACTERISTICS DC Current Gain (IC = 4.0 Adc, VCE = 5.0 Vdc) hFE 10 70 150 — DYNAMIC CHARACTERISTICS Output Capacitance (VCB = 12.5 Vdc, IE = 0, f = 1.0 MHz) C ob — 90 125 pF NOTES: (continued) 1. This device is designed for RF operation. The total device dissipation rating applies only when the device is operated as an RF amplifier. 2. Thermal Resistance is determined under specified RF operating conditions by infrared measurement techniques. Order this document by MRF240/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0082/C0070/C0050/C0052/C0048

40 W, 145–175 MHz

CASE 145A–09, STYLE 1  Motorola, Inc. 1994

  1. To MIL–STD–1311 Version A, Test Method 2204B, Two Tone, Reference Each T one.

Figure 1. 160 MHz Test Circuit Schematic

Figure 2. Power Gain versus Frequency Figure 3. Output Power versus Input Power Figure 4. Output Power versus Supply Voltage Figure 5. Output Power versus Supply Voltage Figure 6. Output Power versus Supply Voltage

160 MHz

75 MHz

Figure 7. Series Equivalent Input/Output Impedances ZOL * =voltage and frequency.

MRF240MOTOROLA RF DEVICE DATA PACKAGE DIMENSIONS CASE 145A–09 ISSUE M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 1: PIN 1. EMITTER 2. BASE 3. EMITTER 4. COLLECTOR DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.370 0.385 9.40 9.78 B 0.320 0.330 8.13 8.38 C 0.670 0.790 17.02 20.07 D 0.215 0.235 5.46 5.97 J 0.003 0.007 0.08 0.18 L 0.055 0.070 1.40 1.78 M 45 NOM 45 NOM R 0.299 0.307 7.59 7.80 S 0.158 0.178 4.01 4.52 T 0.083 0.100 2.11 2.54 U 0.098 0.132 2.49 3.35 /C0095 /C0095 SEATING PLANE S J U KD L A R M 42B E P T 8–32UNC–2A WRENCH FLAT C

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 MRF240/D /C0042/C0077/C0082/C0070/C0050/C0052/C0048/C0047/C0068/C0042