MRAC66P

MRAC WINCHESTER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 93

Technical content

Rack & Panel Rectangular ■ Miniature ■ Subminiature ■ Environmental ■ Removable Contacts While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester Interconnect disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information on the latest design specifications. MRAC Miniature Rectangular Connectors With Removable Contacts 2- 10 XAC External Miniature Rectangular Connectors With Removable Contacts 11 - 20 TMRAC Heavy Duty, Industrial and Commercial, Miniature Rectangular Rack and Panel Connectors With Removable Contacts 21 - 22 TXAC Heavy Duty, Industrial and Commercial, External Miniature Rectangular Rack and Panel Connector With Removable Contacts 23 - 24 MRA Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps 25 - 33 MRE Miniature Rectangular / #20 Contacts / .040" Dia. / 7.5 Amps 34 - 43 XMRA and XMRE External Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps #20 Contacts / .040" Dia. / 7.5 Amps 44 - 53 SLE, SME and SRE Sub Miniature / High Density Rectangular / .025" Dia. / 3 SREC Sub Miniature Rectangular Connector With Removable Contacts 58 - 60 42 Panel Mount Miniature / 22 AWG / .030" Dia. / 5 Amps 61 - 64 SRM Sub Miniature Rectangular / #20 Contacts / .040" Dia. / 7.5 Amps 65 - 70 PM1 High Voltage, Single Contact / #20 Contacts / .040" Dia. / 7.5 Amps 71 PM6 High Voltage Miniature / #20 Contacts / .040" Dia. / 7.5 Amps 72 SM Sub Miniature / #20 Contacts / 3 and 7.5 Amps 73 - 74 M High Voltage Miniature / #20 Contacts / .040" Dia. / 7.5 Amps 75 - 78 JF Miniature Side Mount / #20 Contacts / .040" Dia. / 7.5 Amps 79 - 81 JFA Miniature Side Mount / #16 Contacts / .062" Dia. / 13 Amps 82

100 Removable Contacts 83 - 91

107 Tools and Accessories 92 - 93

Contact a Winchester Interconnect sales representative for your V.35 Rack & Panel Data Communications Connectors www.winconn.com Table Of Contents

Removable contacts offer a substantial savings of time, labor and a great flexibility in the choice of circuitry. The contact is easily removed with the hand tool depicted and then placed by hand or with a simple insertion tool The MRAC Series is an important extension of the MRA line featuring a variety of crimp and solder removable contact styles. Except for body thickness, they are similar and interchangeable with the MRA Series. ■Closed Entry Removable Socket and Pin Contacts. ■Connector Inserts with 9 to 104 Contacts. ■Quick Crimp ... Snap in Place! ■To remove ... insert removal tool — “Push Out” Contact! Current Rating: Up to 13 amps No. of Contacts: 9, 14, 18, 20, 26, 34, 41, 42, 50, 66, 75, 104 Contacts: Must be ordered separately. Select from crimp, solder, dip solder, shielded or Wire- Wrap termination contacts. See 100 Series contact section. Contact Identificaiton: Standard contact identifica- tion is alphabetical except for MRAC66 and 75 which have numerical identification. To order numerical identification on MRAC 34, 50 or 104, specify MNAC**P or S. Electrical Data: Meets high potential performance of MIL-C-28748. The dielectric withstanding voltage is one minute electrification at 2000 VAC (sea level). Dielectric: MRAC Series: Standard glass filled diallyl phthalate, per MIL- M-14, SDG-F, color gray. Qualification: Military Versions are QPL’d to M28748/3 and M28748/4. Polarization: Gold plated guides provide positive polarization. Polarized nickel-plated brass and/or passivated stainless steel with anodized aluminum knobs available. Hoods: Anodized aluminum. May be applied to either plug or receptacle. Both top and side opening hoods available. CATALOG NO. MRAC 42P MS 18180-1 MRAC 42S MS 18181-1 MRAC 50P MS 18182-1 MRAC 50S MS 18183-1 MRAC 66P MS 18184-1 MRAC 66S MS 18185-1 MRAC 75P MS 18187-1 MRAC 75S MS 18188-1 MRAC 104P MS 18189-1 MRAC 104S MS 18190-1 CATALOG NO. MRAC 9P MS 14007-1 MRAC 9S MS 14006-1 MRAC 14P MS 18174-1 MRAC 14S MS 18175-1 MRAC 20P MS 18176-1 MRAC 20S MS 18177-1 MRAC 26P MS 14008-1 MRAC 26S MS 14005-1 MRAC MS34P MS 18178-1 MRAC MS34S MS 18179-1 Miniature Rectangular, Removable Contacts MRAC Series Specifications Military Cross Reference RP / 2 www.winconn.com

.38 1.000 .81 4-40 UNC 2A THD. .27 .86 .37 .86 Slot .038 Wide .78 .27 .52 .13R .44 .937 1.250 .86 4-40 UNC 2A THD. .86 .27 .37 .37 Slot .038 Wide .78 .27 MRAC 18S-G MRAC 18P-G MRAC 20S-G MRAC 20P-G MRAC 9S-G MRAC 9P-G MRAC 14S-G MRAC 14P-G .52 .78 .27 .37 Slot .038 Wide .86 .27 .37 .52.86 4-40 UNC 2A THD. 1.0781.250 1.563 .44 .22.56 1.000 1.313 .78 4-40 UNC 2A THD. .86 .37 Slot .038 Wide .78 .37 .27 .52.86 .075 Typ. 1.313 .09R .172 Typ. .09R .075 Typ. .78 .09R .075 Typ. .13R .27 .09R .13R .075 Typ. .130 Typ. .130 Typ. .130 Typ. Outline possible for positive polarization and for protection of contacts except for the MRAC 104 where the jackscrew locking device is recommended. Drawings and corresponding part numbers show G type guide sockets. It is recom- mended that guides be used wherever Dimensions are for reference only and are subject to change. Outline drawings on request. Standard Guide Pin mates with all types Brass For High Electrical Conductivity Beryllium Copper Guide Socket Actual Code Letter Size Photo How To Order: To obtain “K” or “N” guides in place of the standard “G” type, substitute the desired socket style code letter (“K” or “N”) for “G” in both the Plug and Receptacle Code Numbers. For General Use Phosphor Bronze For Extra Mechanical Strength Brass Plug Recepticle No. of Wt. in Ozs. Code Code Contactsw/o Contacts No. No. Plug Rec. MRAC9P MRAC9S 9 .15 .17 MRAC14P MRAC14S 14 .17 .2 MRAC18P MRAC18S 18 .17 .2 MRAC20P MRAC20S 20 .17 .25 MRAC26P MRAC26S 26 .42 .67 MRAC34P MRAC34S 34 .42 .67 Plug Recepticle No. of Wt. in Ozs. Code Code Contactsw/o Contacts No. No. Plug Rec. MRAC41 MRAC41S 41 .5 .7 MRAC42P MRAC42S 42 .5 .7 MRAC50P MRAC50S 50 .6 .85 MRAC66P MRAC66S 66 .7 1.05 MRAC75P MRAC75S 75 .9 1.3 MRAC104P MRAC104S 104 1.2 1.78 Miniature Rectangular, Removable Contacts MRAC Series RP / 3 www.winconn.com Physical Data Guide Sockets *For passivated stainless steel add S S suffix

Dimensions are for reference only and are subject to change. Outline drawings on request. Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC 104. MRAC 104 uses four #6 machine screws for mounting. *For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34, 50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard. Drawings and corresponding part numbers show G type guide sockets except for the MRAC104P and S which show JT hardware. .56 .09R .13R 1.312 1.625 4-40 UNC 2A THD .86 .27 .37 1.072 Slot .038 Wide .86 .52 .78 .37 .27 .75 .47 .23 .09R 4-40 UNC 2A THD Slot .038 Wide .27 .37 .86 .78 .27 .37 1.688 2.000 1.375 .86 .52 Mounting holes for number 4 machine screws .75 .47 .23 .09R 4-40 UNC 2A THD Slot .038 Wide .27 .37 .86 .78 .27.37 2.313 1.672 .86 .52 2.000 .73 .44 .09R .13R 2.312 2.625 4-40 UNC 2A THD .86 .27 .37 2.125 Slot .038 Wide .86 .52 .78 .37 .27 .22 MRAC 41S-G MRAC 41P-G MRAC 42S-G MRAC 42P-G MRAC 26S-G MRAC 26P-G MRAC 34S-G MRAC 34P-G .075 Typ .130 Typ .075 Typ .180 Typ Mounting holes for number 4 machine screws .075 Typ .180 Typ .075 Typ .130 Typ Miniature Rectangular, Removable Contacts MRAC Series Outline RP / 4 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. Mounting Note: Connectors MRAC 26, MRAC 20 and smaller, use guides for mounting in a hood or on a panel. Connectors MRAC 34, MRAC 42, MRAC 50, MRAC 66, and MRAC 75 use four #4 machine screws, in addition to guides, for mounting in a hood or on a panel. Guides are not recommended for use with MRAC 104. MRAC 104 uses four #6 machine screws for mounting. *For numerical contact identification instead of alphabetical, order MNAC._______P or S available in sizes 34, 50 and 104. Example MNAC 34P. MRAC 66 and 75 have numerical contact identification as standard. Drawings and corresponding part numbers show G type guide sockets except for the MRAC104P and S which show JT hardware. 1.109 .31R MRAC 75S-G MRAC 75P-G MRAC 104S-JT * MRAC 104P-J MRAC 50S-G MRAC 50P-G MRAC 66S-G MRAC 66P-G .47 .88 .75 .23 1.97 2.594 2.719 2.282.73 .16R Mounting holes for number 4 machine screws .86 .52 .27 4-40 UNC 2A THD .14 .86 Slot .038 Wide .37 .09 .78 .37 .27 .50 1.125 .2 5 1.969 2.281 1.672 4-40 UNC 2A THD .86 .27 .37 Slot .038 Wide .78 .37 .27 .52.86 .80 .27.37.16 6-32 UNC 2A THD. .52 .16 .16 .86 2.750 2.375 1.469 .38R .88 .44 .37 .16 .038 Dia. holes for safety wire 1.359 1.094 .16R .86 .52 1.234 .77.23 .97 .14 Slot .038 Wide .09 .78 .37 .27 .86 .37.27 4-40 UNC 2A THD 1.109 2.719 2.282 2.594 1.531 8-32 UNC THD. .075 Typ .180 Typ 2.000 Mounting holes for number 4 machine screws .150 Typ .180 Typ Mounting holes for number 6 machine screws .075 Typ .180 Typ Mounting holes for number 4 machine screws .075 Typ .180 Typ Miniature Rectangular, Removable Contacts MRAC Series RP / 5 www.winconn.com Outline

C Jacksocket Jackscrew 4-40 UNC except size 104/6-32 UNC 6-32 UNC THD. except size 104/8-32 UNC D .78 E .16 Hood Self Locking Pin Top Cable Opening Side Cable Opening F Mono- Jackscrew Top Cable Opening Mono- Jacksocket 052 Dia. Safety Wire Hole .16 Side Cable Opening A B Polarized jackscrews give the ease and assurance of threaded positive coupling. The actuating side consists of two turnable screws, one male and one female, each with knurled and slotted knobs. On the mating half are the two fixed screws required to complete the locking action. When mated, the jackscrews may be locked with a safety wire through the hole in the self-locking pin (in the jackscrew shaft). Connector with fixed Jackscrews Code designation: J AND Mating connector half with turnable Jackscrews-with-Knobs. Code designation: JT OR Mating connector half with Hood and turnable Long Jackscrews-with- Knobs. Code designation: JTC H, JTC H1 OR Mating connector half with Hood and turnable Monojacks. Code designation: JTDH, JTDH1 New Monojacks Assemble and Disassemble With Remarkable Ease and Speed To free the connector from the hood, simply remove four screws. Monojacks may be used on miniature rectangular connectors with from 34 to 104 contacts and with molds featuring guide hole and two mounting holes on both ends. Molds have 2 center thru holes and 4 mounting holes. Dimension A Dimension B H H 1H 8H 9 H 1 3 H H 1 H 8H 9 Dimension E Dimension F H H1 H8 H9 H13 H H1 H8 H9DC Connector Size Dimensions are for reference only and are subject to change. Outline drawings on request. MOLDINGS HAVE STRAIGHT THRU HOLES MONOJACKS ARE CAPTIVATED IN KEYHOLE SLOT OF HOOD AS SHOWN ABOVE. WHEN USING SHELLS, MONOJACKS ARE CAPTIVATED IN KEYHOLE OF SHELL AND CLEARANCE HOLES ARE PLACED IN HOODS. Miniature Rectangular, Removable Contacts MRAC Series Outline Jackscrews & Jacksockets Dimensions RP / 6 www.winconn.com

9 – 2.22 – – 2.22 14 – 2.22 – – 2.22 18 – 2.22 – – 2.22 20 – 2.22 – 2.22 2.22 26 2.22 2.22 2.22 2.22 – 34 2.22 2.22 2.22 2.22 – 41 2.22 2.22 – – – 42 2.22 2.22 2.22 2.22 – 50 2.22 2.22 2.22 2.22 – 66 2.22 – – 2.22 – 75 2.22 2.22 2.22 2.22 – Size Type JTCU HH 1H 8 H 9 H13 Dimension A 9 – 2.47 – – 2.47 14 – 2.47 – – 2.47 18 – 2.47 – – 2.47 20 – 2.47 – 2.47 2.47 26 2.47 2.47 2.47 2.47 – 34 2.47 2.47 2.47 2.47 – 41 2.47 2.47 – – – 42 2.47 2.47 2.47 2.47 – 50 2.47 2.47 2.47 2.47 – 66 2.47 – – 2.47 – 75 2.47 2.47 2.47 2.47 – Size Size Size Dimension A 9 – 2.47 – – 2.47 14 – 2.47 – – 2.47 18 – 2.47 – – 2.77 20 – 2.47 – 2.47 2.47 26 2.73 2.47 2.47 2.47 – 34 2.47 2.47 2.47 2.47 – 41 2.47 2.47 – – – 42 2.47 2.47 2.47 2.47 – 50 2.47 2.47 2.47 2.47 – 66 2.47 – – 2.47 – 75 2.47 2.47 2.47 2.47 – Type JTCX HH 1H 8 H 9 H13 Dimension A 9 – 2.34 – – 2.34 14 – 2.34 – – 2.34 18 – 2.34 – – 2.34 20 – 2.34 – 2.34 2.34 26 2.61 2.34 2.34 2.34 – 34 2.34 2.34 2.34 2.34 – 41 2.34 2.34 – – – 42 2.34 2.34 2.34 2.34 – 50 2.34 2.34 2.34 2.34 – 66 2.34 – – 2.34 – 75 2.34 2.34 2.34 2.34 – Type JTCZ HH 1 H 8 H 9 H13 All jackscrews and sockets are stainless steel, passivated except J & JTD which are nickel plated brass. All knobs are aluminum, anodized except JTW and JTCW which are stainless steel, passivated.Hood Type Dimensions are for reference only and are subject to change. Outline drawings on request. A .19 Dia. .078 INT. HEX. A .22 Dia. .25 HEX. A .50 A .22 Dia. JTCZJTCXJTCUJTCW .078 INT. HEX. .19 Dia. .36 .22 Dia. .78 .25 HEX. JTX JZ .80 Typ. .16 Typ. 6-32 UNC 2 THD. 6-32 UNC 2 THD. (Typ.) JTUJTW Miniature Rectangular, Removable Contacts MRAC Series RP / 7 www.winconn.com Outline Jackscrews and Jacksockets Dimensions

DIMENSIONS Wt. Fits A B C D E F G Oz. Connector Dimensions are for reference only and are subject to change. Outline drawings on request. Hoods shown are MRE Hoods for use with MRAC Connectors Code No. Cable Opening Code No. Cable Opening Top Cable Opening Side Cable Opening Formed Hoods for MRAC Connectors are available in top and side opening for most MRAC Connectors - Deep Drawn Hoods are available for MRAC 34, MRAC 66 and MRAC 104 connectors ... providing additional strength. Hoods and cable clamps are of anodized aluminum. They provide support and strain relief for the cable and may be applied to either Plug or Receptacle. Hoods may be ordered separately (see code numbers in the tables below) or assembled on connectors. DIMENSIONS Wt. Fits A B C D E F G Oz. Connector Miniature Rectangular, Removable Contacts MRAC Series Outline Formed Aluminum Hoods Dimensions RP / 8 www.winconn.com

Lock Tabs (MRE-V shown) Lever & Pivot Assemblies (MRE-VL shown) Designed for MRAC connectors, this vibration lock features genuine simplicity of design, plus complete locking effectiveness. Assembly of either the lever-and-pivot assembly or the lock DIMENSIONS AB C D EFG H Code No. .128 Dia 3 Holes (No. 4 Mounting Screw) .150 Dia 3 Holes (No. 6 Mounting Screw) Wt. Oz. Hoods shown are MRA Hoods for use with MRAC Connectors MRAC 104P MRAC 104S MRAC 66P MRAC 66S MRAC 34P MRAC 34S Fits Connector Wt. Oz. Code No. Top Cable Opening Side Cable Opening MRAC 104P MRAC 104S MRAC 66P MRAC 66S MRAC 34P MRAC 34S Fits ConnectorCode No. Wt. Oz. Dimensions are for reference only and are subject to change. Outline drawings on request. Lever & Pilot Assembly MRE-VL MRE-VL2 Used on Connectors MRAC 9, 14, 18, 20, 26, 34, 41, and 42 MRAC 50 MRAC 75 Lock Tabs (See Note) MRE-V MRE-V2 Nomenclature MRAC 50 and MRAC 75 connectors use the standard MRE 50 and MRE 75 mounting brackets. H A B C D E F G 2.625 .11R Panel Opening D C.08 .08 For MRA; 66;104 G B For MRA 34 Only B C D G A .1935 Dia. 2 Holes (.228 Dia. 2 Holes For 104) .08 E Cable Opening H E Cable Opening A Note 1:When panel mounting the lock-tab half of a MRAC 34, MRAC 42 or MRAC 50 connector, flat washers (.033 minimum thickness) should be used on the mounting screws to shim the molding away from the panel. Note 2: Each code number indicates two units, i.e., the “MRE-VL” consists of two levers and two pivots (unassembled*), and the “MRE-V” consists of two tabs. Note 3: These units are supplied unassembled to facilitate handling. The pivot is easily assembled to the lever merely by inserting the hooked end through the lever opening. It will automatically snap into proper position. Patent #2,760,174. parts to the plug and receptacle is quick and easy. The unit locks automatically when the mating plug and receptacle are engaged. Unlocking and disengaging can be done with one hand. Rack & Panel Miniature Rectangular , Removable Contacts MRAC Series RP / 9 www.winconn.com Vibration Locks Dimensions / Outline Hoods Dimensions / Outline

H Guides G* Phosphor Bronze Cylindrical Guides K Beryllium Copper Cylindrical Guides N* Brass Cylindrical Guides Guides are not recommended for Size 104 “P” indicates two guide pins or two jackscrews (EX. JTCP) “S” indicates two guide sockets or two jacksockets (Ex. GS) Jackscrew Locks *J Polarized Fixed Jackscrew and Jacksocket JT Polarized Short Turning Jackscrew and Jacksocket JTC Polarized Long Turning Jackscrew and Jacksocket JTD Polarized Long Turning Mono-Jackscrew and Mono-Jacksocket for Sizes 34, 42, 50, 66, 75, and 104 only. JZ Same as J but with 6-32 mtg. thd. (Std. on 104) JTW Same as JT but with knurled round knob with internal hex (not avail. 104) JTU Same as JT but with knurled round knob with screwdriver slot (not avail. 104) JTX Same as JT but with hex knob (not avail. 104) JTCW Same as JTC but with knurled round knob with internal hex (not avail. 104) JTCU Same as JTC but with knurled round knob with screwdriver slot (not avail. 104) JTCX Same as JTC but with hex knob (not avail. 104) **JTCZ Same as JTC but with prybar knob (not avail. 104) * For passivated stainless steel add SS suffix. Request availablity information. *Material: Nickel Plated Brass standard GV L ■ Step 7 Special Options: Consult Sales Department Notes: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel 2. When ordering molding less hardware and hood for use with JTD Monojacks, connectors must be ordered as follows: Pin connector = MRAC 34P8, MRAC 42P8, etc. Socket connector = MRAC 34S8, MRAC 42S8, etc. The number “8” indicates special housing for use with the JTD Monojack hardware (available on sizes 34, 42, 50, 66, 75 and 104).

34 SMRAC

■ Step 1 Series: MRAC MNAC Numerical contact identification on sizes 34, 50, and 104. ■ Step 3 Contact Designation: P - Pin S - Socket When ordering moldings less hardware to be used with monojacks, see note 2 below. ■ Step 2 Number of Contacts: 9, 14, 18, 20, 26, 34, 41, 42, 50, 66, 75, 104 See note 1 below. ■ Step 4 Guides and Jackscrew Locks: (See bottom Chart) ■ Step 5 Hoods: H - Standard top opening. Sizes 26 thru 104 only. H1 - Standard side opening. Available all sizes. H8 - Large top opening. Sizes 26 thru 104 only. H9 - Large side opening. Available all sizes. H13 -Large top opening, high hood. Sizes 9, 14, 18 & 20 only. ■ Step 6 Vibration Locks: V - Lock Tab V2 - Lock Tab (Size 50 & 75) VL - Lever & Pivot Ass’y VL2 - Lever & Pivot Ass’y (Size 50 & 75) ■ Step 4 *** Miniature Rectangular, Removable Contacts l MRAC Series

Ordering Information

RP / 10 www.winconn.com

Designed for external installation, the XAC is the MRAC removable contact connector equipped with protective shells and mounting plates for chassis or cable mounting on metal containers, bulkheads, or any outside surface equipment. Lighter and smaller than other external connectors, they provide dependable service under adverse conditions. Inserts are housed in protective shells and there is screw lock coupling of plug and receptacle. Current Rating: Up to 13 amps No. of Contacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, 104 Contacts: Contacts must be ordered separately. Select from crimp, solder, dip solder, shielded or wire wrap terminations. Electrical Data: Meets high potential performance requirements of MIL-C-28748. The dielectric withstanding voltage is one minute electrification at 2000 VAC. Military versions are QPL’d to M28748/3 and M28748/4. Dielectric: Diallyl Phthalate, MIL-M-14, Type SDG-F, Color Gray Polarization: Seven positions available for pin and slot polarization on shells. Additional polariza- tion can be provided with various arrangements of jackscrews and guides. Accessories: Shells, formed and drawn hoods, mounting plates, jackscrews and jacksockets. XAC34SF2A010 XAC34PM1A000 XAC34PC1A700 CATALOG NO. XMRE75-0400XS MS 18192SXX XMRE75-0400XP MS 18192-S6 XMRA66-0700 MS 18193-T1 XMRA66-0800 MS 18193-S1 XMRA 104-0700 MS 18193-T2 XMRA 104-0800 MS 18193-S2 XJTCMS605P MS 18194-1 XJTCMS605S MS 18194-2 XJTCMS608P MS 18194-3 XJTCMS608S MS 18194-4 XJTMS605P MS 18195-1 XJTMS605S MS 18195-2 XJTMS606P MS 18195-3 XJTMS606S MS 18195-4 XJMS602P MS 18196-1 XJMS602S MS 18196-2 CATALOG NO. XAC9-0300X MS 18192-T8 XAC14-0300X MS 18192-T1 XAC20-0300X MS 18192-T2 XMRE9-0400X MS 18192-S8 XMRE14-0400X MS 18192-S1 XMRE20-0400X MS 18192-S2 XMRE26-0300X MS18192-T9 XMRE26-0400X MS 18192-S9 XMRE34-0300X MS18192-T3 XMRE34-0400X MS 18192-S3 XMRE42-0300X MS 18192-T4 XMRE42-0400X MS 18192-S4 XMRE50-0300X MS18192-T5 XMRE50-0400X MS 18192-S5 XMRE75-0300XP MS 18192-T6 XMRE75-0300XS MS 18192-TXX CATALOG NO. XJMS603P MS 18196-3 XJMS603S MS 18196-4 XNMS700P MS 18197-1 XNMS700S MS 18197-2 XNMS702P MS 18197-3 XNMS702-S MS 18197-4 XMRA 14-0010 MS 18198-1 XMRA 20-0010 MS 18198-2 XMRA 34-0010 MS 18199-1 XMRA42-0010 MS 18199-2 XMRA50-0010 MS 18199-3 XMRA75-0010 MS 18199-4 XMRA66-0010 MS 18200-1 XMRA104-0010 MS 18200-2 External Miniature Rectangular, Removable Contacts XAC Series RP / 11 www.winconn.com Specifications

Plug: The complete connector half which has the plug shell as part of its assembly. Receptacle: The complete connector half which has the receptacle shell as part of its assembly. Shell: The metal housing in which a male or female insert is assembled. A shell is either a plug shell or a receptacle shell: Plug Shell - one which is designed to be inserted into a receptacle shell. Receptacle Shell - one which is designed to receive and enclose the plug shell upon engagement. Male Insert: The molded insulator body containing pin contacts. Female Insert: The molded insulator body containing socket contacts. Pin Contacts: Male Contacts that fit into the socket contacts. Socket Contacts: Female Contacts tubular in shape, which receive the pin contacts and retain them by spring tension. Polarization: A means of controlling the engagement of a plug and receptacle so that correct mating of the contacts is achieved. Accessories: Those components such as hoods and mounting plates which are attachable to a plug or receptacle to facilitate mounting and/or handling of the connector, and to prevent inadvertent cross-mating. Self-locking pins Jackscrew and Jacksocket Knobs Receptacle Plug Shell Male Insert Mounting Plate Receptacle Shell Female Insert Fixed Jackscrew Fixed Jacksocket Turnable Jacksocket Turnable Jackscrew External Miniature Rectangular, Removable Contacts XAC Series Connector Assemblies Definition of Connector Terms RP / 12 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.) *For numerical contact identification instead of alphabetical, order XNAC**P or S available in sizes 34, 50, and 104. Sizes 66 and 75 have numerical contact identification as standard. The spacing, arrangement, and identificaion of contacts of the XAC inserts are the same as those found on the Series MRAC removable contact connectors for the same number of contacts. Mounting Holes For No. 4 Machine Screws XAC 66 1.109 .31R 1.969 2.281 .50 .25 1.125 XAC 26 .09R .13R 1.312 1.625 .56 XAC 9 .09R 1.000 1.313 .38 XAC 14 .09R .937 1.250 .44 .13R XAC 18 .09R 1.000 1.313 .56 .13R XAC 20 .09R 1.250 1.563 .44 .13R .22 XAC 34* 1.688 2.000 .75 .09R.23 .47 XAC 42 2.000 2.313 .75 .09R .23 .23 .73 .47 XAC 50* 2.282 2.594 .88 .16R .23 .73 .75 2.719 .47 XAC 75 1.094 .16R 2.282 2.719 Mounting Holes For No. 6 Machine Screws XAC 104* 1.469 .38R .44 2.594 1.234 1.109 .77 .23 1.531 .88 2.375 2.750 .075 Typ .172 Typ .075 Typ .130 Typ .075 Typ .130 Typ .075 Typ .130 Typ .075 Typ .180 Typ .075 Typ .130 Typ Mounting Holes For No. 4 Machine Screws .075 Typ .180 Typ Mounting Holes For No. 4 Machine Screws .075 Typ .180 Typ Mounting Holes For No. 4 Machine Screws .150 Typ .180 Typ Mounting Holes For No. 4 Machine Screws .075 Typ .180 Typ .075 Typ .180 Typ External Miniature Rectangular, Removable Contacts XAC Series RP / 13 www.winconn.com Contact Arrangements

Turnable jackscrew-jacksocket combination (M, C, or D) assembles on either Plug or Recep- tacle; the mating connector-half (either Receptacle or Plug) must then contain fixed jackscrew-jacksocket combination (F). Both short and long turning jackscrews (M and C) have knurled and slotted knobs for locking by hand or screwdriver. Knob is assembled on shaft with hollow, removable, self-locking pin. Safety wiring of engaged halves is achieved by using the through-hole in self-locking pin in the knob. Monojacks (D) are long turning one-peice locking devices with slotted and knurled head. Shaft has through-hole for safety wire. available with hoods only, in sizes 34, 42, 50, 66, 75, and 104. Drawings show extension of standard knobs beyond shell and beyond hood. Dimensions are for reference only and are subject to change. Outline drawings on request. Views are rear (wiring end) of female inserts. (Male inserts are opposite.) *On sizes 9, 14, 18, and 20, only large top opening hoods are available when (c) long turning jackscrews are used. Catalog Number for large top opening hoods is - 0300X. Example: XAC20-0300X Jackscrew locking device assures positive coupling of engaged connectors to prevent accidental disconnecting from vibration or physical shock. It also aids easy connection and separation of connector plug and receptacle. Mounted connector-half houses one non-turnable fixed jackscrew and jacksocket to insure connector polarization. Mating-half houses one of the three types of turning jackscrew and jacksocket (M, C, or D). Standard Knobs - Extension Beyond Hood XAC 9* 14* 18* 20* 26 34 42 50 66 75 104 34 42 50 66 75 104 Dimension A Dimension B LOCKING DEVICE SPECIFICATIONS WT. OZ. CODE See Notes MATERIAL AND LETTER 1 & 2 FINISH Jackscrew Nickel Plated Brass Jacksocket Fixed F 0.15 Jackscrew Short Stainless Steel with Jacksocket Turnable M 0.30 Passivating Dip Jackscrew Long Stainless Steel with Jacksocket Turnable C 0.45 Passivating Dip Mono-Jackscrew Long Turnable D 1.07 Nickel Plated Brass Mono-Jacksocket Knob Standard — — Aluminum Anodized Note 1: Weights are for pairs; i.e. for a jackscrew and jacksocket, etc., so weight figure may be added once to weights of other accessories when computing total weight of plug or receptacle. Note 2: Weights of turnable jack- screws and turnable jacksockets include knob and rollpins, except mono-jackscrew and mono-jacksocket, which is a one-piece construction (shaft and knob made in one piece); weight of fixed jackscrew and jacksocket includes nuts. .73 Fixed Jackscrews (F) Monojacks (D) Used With Hoods Long Turning Jackscrews (C) Used With Hoods Short Turning Jackscrews (M) Used Only Without Hoods External Miniature Rectangular, Removable Contacts XAC Series Jackscrew & Jacksockets Specifications

Applications

RP / 14 www.winconn.com

0300 0400 0300X 0400X 0700 0800 Dimension A – Type CW 66 – – – – .47 .47 Dimension A – Type CU 66 – – – – .72 .72 HoodsSize 0300 0400 0300X 0400X 0700 0800 Dimension A – Type CX 66 – – – – .61 .61 Dimension A – Type CZ 66 – – – – .72 .72 HoodsSizeAll jackscrews and sockets are stainless steel, passivated (except F & D which are nickel plated brass). All knobs are Dimensions are for reference only and are subject to change. Outline drawings on request. CZCXCUCW A A A A .19 Dia. .078 INT. HEX. .22 Dia. .25 HEX. .50 .22 Dia. .22 Dia. .97 .19 Dia. .33 MUMW .73 .25 HEX. FZMX .23 6-32 UNC 2 THD. (TYP.) aluminum, anodized except MW and CW which are stainless steel, passivated. External Miniature Rectangular, Removable Contacts XAC Series RP / 15 www.winconn.com Outline - Jackscrews Dimensions

Hoods - Side Cable Opening DIMENSIONS AB CD E F G Hood Part No. (If ordered separately) Type F Jackscrews Type D Jack Sockets and Jackscrews ForUse With Type C Jack Sockets and Jackscrews Dimensions are for reference only and are subject to change. Outline drawings on request. The XAC Series uses standard XMRA/ XMRE protective hardware. To order separately, use XMRE/XMRA catalog numbers indicated. XMRA Drawn Hoods for use with XAC Connectors. DIMENSIONS AB C D E F Hood Part No. (If ordered separately) Type F Jackscrews Type D Jack Sockets and Jackscrews ForUse With Type C Jack Sockets and Jackscrews Hoods - Top Cable Opening .08 .08 .08Top Cable Opening Side Cable Opening External Miniature Rectangular, Removable Contacts XAC Series Outline Hoods- Drawn Aluminum Dimensions RP / 16 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. For use with Type C Jacksockets & Jackscrews Cable OpeningDimensionsFor use with Monojacks Hood Part No. (If ordered separately) AB CD E Dia. F Dia. XMRE 20-0400 XMRE 20-0600J 1.28 1.56 2 .5 .38 – XMRE 34-0400D XMRE 34-0400 XMRE 34-0600J 1.25 2 2.42 .83 .66 – * For use with G, K, or N guides, eliminate letter “J” from part number For use with Fixed Jackscrews* Hoods - Top Cable Opening For use with Type C Jacksockets & Jackscrews Cable OpeningDimensionsFor use with Monojacks Hood Part No. (If ordered separately) AB CD E Dia. F Dia. Wt. Oz. (Inc. 2 Cable Clamps and Screws) For use with Fixed Jackscrews* XMRE 34-0300D XMRE 34-0300 XMRE 34-0500J 1.25 2 1.69 .83 .66 – * For use with G, K, or N guides, eliminate letter “J” from part number Hoods - Side Cable Opening XMRE Formed Hoods for use with XAC Connectors Wt. Oz. (Inc. 2 Cable Clamps and Screws) Side Cable OpeningLarge Top Cable OpeningTop Cable Opening External Miniature Rectangular, Removable Contacts XAC Series RP / 17 www.winconn.com Outline Hoods- Formed Aluminum Dimensions

Dimensions are for reference only and are subject to change. Outline drawings on request. Important Note When Ordering Plug and Receptacle Shells The shell part numbers given in the table show an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-2*000 becomes XMRE9- 2B000 when polarization in position “B” is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE9-2000. DIMENSIONS Wt. ABCD EFG O z . XMRE 34-2*000 XMRE 42-2*000 XMRE 50-2*000 XMRA 66-2*000 XMRE 75-2*000 XMRA 104-2*000 Shell Part No. (If ordered separately) TYPICAL SHELLS FOR MONOJACKS STYLE No. 4000 Shells are .040 in. thick. Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the “live” socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. Any of seven positions (A, B, C, D, E, F or G) may be specified for polarization; non-polarized shells have the slot and pin omitted. For Connector Size A B C 34, 42, 50, 66, 75 .11 .120 .06R 104 .14 .150 .07R For XAC 34, 42, 50, 66, For XAC 75 Receptacle Shell and 104 Configurations Configuration Style No. 2000 Shells are .040 in. thick. .06R .03R .06R .06R ED .14R.120 Dia.

2 Holes

B C .14R .120 Dia. ED .114 G .06R .500 .120 Dia.

6 HolesG

.384 R. B C ED ED.06R .06R .120 Dia.

4 Holes

.150 Dia.

6 Holes

.875 G .20 R. .421 R. ..140 Dia.4 Holes B C .766 .383 .117 B C For All XAC For XAC 9 to 26 For XAC 34, 42, For XAC 66 For XAC 75 For XAC 104 Configurations and 50 C Typ. C Typ. B Dia.

4 Corner

B Dia. .06R Mtg. Hole Style 9 .28 .156 Typ. .312 Typ. Polarizing Slot A F B C External Miniature Rectangular, Removable Contacts XAC Series Outline Shells- Receptacles Dimensions Shells - Receptacles RP / 18 www.winconn.com

Important Note When Ordering Plug Shells The shell part numbers given in the table shows an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9-1*000 becomes XMRE9-1B000 when polarization in position “B” is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE9-1000. Shells are .040 in. thick. Stainless steel shells available for 66 and 104 sizes. Dimensions vary from those shown for aluminum shells. Check sales for availability and dimensions on all sizes. DIMENSIONS Wt. ABCD EFG O z . XMRE 34-1*000 XMRE 42-1*000 XMRE 50-1*000 XMRA 66-1*000 XMRE 75-1*000 XMRA 104-1*000 Shell Part No. (If ordered separately) TYPICAL SHELLS FOR MONOJACKS STYLE No. 3000 Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the “live” socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. Any of seven positions (A, B, C, D, E, F or G) may be specified for polarization; non-polarized shells have the slot and pin omitted. For XAC 104 For XAC 75 For XAC 66 For XAC 34, 42, For XAC 75 For All XAC and 50 For XAC 9 to 26 Configurations For XAC 75 For XAC 34, 42, 50, 66, Plug Shell Configuration and 104 Configurations Style No. 1000 Shells are .040 in. thick. A2 Slots B Dia. Holes C Typ.C Typ. B Dia. Dimensions are for reference only and are subject to change. Outline drawings on request. .06R B C F .508 A Polarizing Pin .156 Typ. .312 Typ. .14R .06R DE .120 Dia. Mtg. Hole Style 9 B C .14R G .468 .120 Dia. .06R DE .120 Dia. .06R .03R G .06R .372 R. .500 .120 Dia. B C DE .06R B C .150 Dia. .875 .421 R. DE .06R .120 Dia. .766 .20 R.G .140 Dia. B C .117 .383 For Connector Size A B C 34, 42, 50, 66, 75 .11 .120 .06R 104 .14 .150 .07R External Miniature Rectangular, Removable Contacts XAC Series RP / 19 www.winconn.com Outline Shells - Plugs Dimensions

■ Step 9 Special Gaskets: Omit letter when gaskets are not required. G- Bulkhead gasket, style #0000G. Use only when mounting plate is specified. F- Face gasket, style #0000F. Use with male insert only. B- If both gasket #0000G and gasket #0000F are desired. Check plant for availability ** on all gaskets. ■ Step 8 Mounting Plate: 00- When no mounting plate is required *10- Mounting plate, style #0010. Note: See section XMRA/E RP/ 57. *Mounting plates are not used with jackscrews. ■ Step 7 (See bottom chart) ■ Step 6 Polarization Position: A, B, C, D, E, F or G. Omit letter when polarization is not required. ■ Step 5 Shell Type: 0 No shell 1 Plug shell, style 1*000. ** 2 Receptacle shell, style *000. ** 3 Plug shell, monojack type, style 3 *000. ** 4 Receptacle, monojack type, style 4 *000. ** 7 Stainless Steel Plug shell, style 7*000. ** 8 Stainless Steel Receptacle shell, style 8 *000. Polarizing Position Request availability information ■ Step 4 Jackscrews (See bottom chart) ■ Step 3 Pin or Socket Contacts: P - Pin S - Socket ■ Step 1 Series: XAC, XNAC Numerical contact identification on sizes 34, 50, and 104. ■ Step 2 No. of Contacts: 9, 14, 18, 20, 26, 34, 42, 50, 66, 75, and 104 See note 1 below Guides G- Cylindrical guide with single spring member. Recommended for ground only. K- Cylindrical guide with four spring members. May be used for electrical contact. N- Cylindrical guide without spring member. Recommended for extra mechanical strength. Jackscrews and Jacksockets * M- Polarized short turnable jackscrew and jacksocket. Cannot be used with hoods. * C- Polarized long turnable jackscrew and jacksocket for use with hoods. * D- Polarized one-piece mono-jackscrew and mono-jacksocket (no separate knob); to be used with hoods on sizes: 34, 42, 50, 66, 75, and 104. **F- Polarized fixed jackscrew and jacksocket usable with or without hood; (no knob required). MW- Same as M but with knurled round knob with internal hex. MU- Same as M but with knurled round knob with screwdriver slot. MX- Same as M but with hex knob. CW- Same as C but with knurled round knob with internal hex. CU- Same as C but with knurled round knob with screwdriver slot. CX- Same as C but with hex knob. CZ- Same as C but with prybar knob. Request availability information * Material: Nickel Plated Brass standard ■ Step 4 ■ Step 7 Formed Hoods: 0- No Hood. 3- Hood, top opening, style #0300, for use with Type “C” or “D” jackscrews. 4- Hood, side opening, style #0400, for use with Type “C” or “D” jackscrews. 5- Hood, top opening, style #0500J, for use with “F” style jackscrews. 6- Hood, side opening, style #0600J, for use with “F” style jackscrews. Deep Drawn Hoods: 7- Hood, top opening, style #0700, for use with Type “C” or “D” jackscrews. 8- Hood, side opening, style #0800, for use with Type “C” or “D” jackscrews. 9- Hood, top opening, style #0900, for use with “F” jackscrews. 2- Hood, side opening, style #0200, for use with “F” jackscrews. Note: Addition of “X” to code # indicates cable opening larger than std. See hoods for cable opening size. Example: XAC20PC1A300 X Note: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel External Miniature Rectangular, Removable Contacts XAC Series Ordering Informations RP / 20 www.winconn.com

Removable contacts offer a substantial savings of time, labor and a great flexibility in the choice of circuitry. The contact is easily removed with the hand tool depicted and then placed by hand or with a simple insertion tool. The TMRAC Series was designed specifically for the industrial/commercial customer for application in high temperature, rough service operations. This series features the same military-type anodized aluminum hoods, rugged polyester thermoplastic insulators, screw-machine removable contacts, guide and hardware as the MRAC Series. Insulators: Polyester thermoplastic, black color. High potential performance: withstanding voltage is one minute electrification at 2000 VAC (sea level). Insulation Resistance: 500V Thermal Shock:-55 oF to +150oF Hoods: Anodized aluminum. May be applied on plug or receptable. Both top and side opening hoods available. Polarization: Gold plated guides provide positive polorization. Polarized nickel-plated brass and/or passivated stainless Contacts: Must be ordered separately. Select from crimp, solder, dip solder, shielded or Wire-Wrap termination contacts. See 100 Series contact section. Contact Identification: Standard contact identification is alphabetical. Sizes: .040" diameter and .062" diameter contacts in 7.5-amp and 13-amp current ratings. Termination Types: Crimp, dip-solder, solder removable in .040" and .062" diameter. Wire Wrap tails and stabilizing bushings for .025" and .045" square. Current Rating: 7.5 amps maximum for .040" contacts. 13 amps maximum for .062" contacts. TMRAC 34S-G TMRAC 34P-G of Underwriters Laboratories Inc. File No. E31650 ® Recognized under the Component Program CSA Certified File No. LR34182 steel jackscrews with anodized aluminum knobs are available. Number of Contacts: Eight size connectors: 9-, 14-, 50-contact, available in either .040" or .062" diameter. Heavy Duty, Industrial and Commercial Mini Rectangular Rack & Panel Connector TMRAC Series RP / 21 www.winconn.com Specifications

H ■ Step 4 Guides and Jackscrew Locks: (See bottom Chart) ■ Step 5 Hoods: H - Standard top opening. Sizes 26, 34, 42 & 50 only. H1 - Standard side opening. Available all sizes. H8 - Large top opening. Sizes 26, 34, 42 & 50 only. H9 - Large side opening. Available all sizes. H13 -Large top opening, high hood. Sizes 9, 14, 18 & 20 only. GV L ■ Step 6 Vibration Locks: V - Lock Tab V2 - Lock Tab (Size 50) VL - Lever & Pivot Ass’y VL2- Lever & Pivot Ass’y (Size 50) ■ Step 7 Special Options: Consult Sales Department ■ Step 1 Insert Series Code: TMRAC ■ Step 2 Number of Contacts: 9, 14, 18, 20, 26, 34, 42, 50, See note 1 below. ■ Step 3 Contact Designation: P - Pin S - Socket When ordering moldings less hardware for use with mono-jacks, see note 2 below. S34TMRAC Guides G* Phosphor Bronze Cylindrical Guides K Beryllium Copper Cylindrical Guides N* Brass Cylindrical Guides “P” indicates two guide pins or two jackscrews (EX. JTCP) “S” indicates two guide sockets or two jacksockets (Ex. GS) * For passivated stainless steel add SS suffix. Jackscrew Locks *J Polarized Fixed Jackscrew and Jacksocket JT Polarized Short Turning Jackscrew and Jacksocket JTC Polarized Long Turning Jackscrew and Jacksocket JTD Polarized Long Turning Mono-Jackscrew and Mono-Jacksocket for Sizes 34, 42, and 50 only. JZ Same as J but with 6-32 mtg. thd. JTW Same as JT but with knurled round knob with internal hex JTU Same as JT but with knurled round knob with screwdriver slot JTX Same as JT but with hex knob JTCW Same as JTC but with knurled round knob with internal hex JTCU Same as JTC but with knurled round knob with screwdriver slot JTCX Same as JTC but with hex knob JTCZ Same as JTC but with prybar knob Request availablity information. *Material: Nickel Plated Brass standard ■ Step 4 Notes: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel 2. When ordering hoods, hardware and connectors separately for use with JTD Monojacks, connectors must be ordered as follows: Pin connector = TMRAC34P8, TMRAC42P8, etc. Socket connector = TMRAC34S8, TMRAC42S8, etc. The number “8” indicates special housing for use with the JTD Monojack hardware (available on sizes 34, 42, and 50). All dimensions for TMRAC housings are the same as MRAC housings. All hoods, hardware, and accesories used on the TMRAC Series are the same as those used on the MRAC Series. See MRAC Series section for part numbers and dimensions. Note the TMRAC Series maximum number of contacts is 50. * TMRAC Series RP / 22 www.winconn.com

The TXAC Series was designed for external installation specifically for the industrial/ commercial customer in high temperature, rough service applications. This series features the same military-type anodized aluminum hoods, rugged polyester thermo- TXAC34SF2A010 TXAC34PM1A000 TXAC34PC1A700 plastic insulators, screw-machine removable contacts, guide and jack hardware, and protective, anodized aluminum shells as the XAC Series. These features make this Series suitable for chassis mounting, bulkheads, or any outside surface equipment. Insulators: Polyester thermoplastic, green color. High potential performance: withstanding voltage is one minute electrification at 2000 VAC (sea level). Insulation Resistance: 500V Thermal Shock:-55 oF to +150oF Hoods: Anodized aluminum. May be applied on plug or receptable. Both top and side opening hoods available. Polarization: Gold Plated guides provide positive polarization. Polarized nickel-plated brass and/or passivated stainless Contact Identification: Standard contact identification is alphabetical. Sizes: .040" diameter and .062" diameter contacts in 7.5-amp and 13-amp current ratings. Contact Resistance: @ 7.5 amps, 14 millivolts max. @ 13 amps, 10 millivolts max. Termination Types: Crimp, dip-solder, solder removable in .040" and .062" diameter. Wire Wrap tails and stabilizing bushings for .025" and .045" square. Current Rating: 7.5 amps maximum for .040" contacts. 13 amps maximum for .062" contacts. Recognized under the Component Program of Underwriters Laboratories Inc. File No. E31650 ® CSA Certified File No. LR34182 steel with anodized aluminum knobs are available. 7-position pin and slot polarization on shells. Number of Contacts: Eight size connectors: 9-, 14-, contact, available in either .040" or .062" diameter. Contacts: Must be ordered separately. Select from crimp, solder, dip solder, shielded or Wire- Wrap termination contacts. See 100 Series contact section. Heavy Duty, Industrial and Commercial, External Mini Rectangular Rack & Panel Connectors TXAC Series RP / 23 www.winconn.com Specifications

■ Step 1 Insert Series Code: TXAC ■ Step 2 No. of Contacts: 9, 14, 18, 20, 26, 34, 42, and 50 See note 1 below. ■ Step 5 Shell Type: 0 No shell 1 Plug shell, style 1*000. ** 2 Receptacle shell, style 2*000. ** 3 Plug shell, monojack type, style 3 *000. ** 4 Receptacle, monojack type, style 4 *000. ** 7 Stainless Steel Plug shell, style 7*000. ** 8 Stainless Steel Receptacle shell, style 8 *000. Polarizing Position Request availability information ■ Step 4 Jackscrews (See bottom chart) ■ Step 6 Polarization Position: A, B, C, D, E, F or G. Omit letter when polarization is not required. ■ Step 7 (See bottom chart) ■ Step 9 Special Gaskets: Omit letter when gaskets are not required. G- Bulkhead gasket, style #0000G. Use only when mounting plate is specified. F- Face gasket, style #0000F. Use with male insert only. B- If both gasket #0000G and gasket #0000F are desired. Check plant for availability on all gaskets. ■ Step 8 Mounting Plate: 00- When no mounting plate is required *10- Mounting plate, style #0010. *Mounting plates are not used with jackscrews. ■ Step 3 Pin or Socket Contacts: P - Pin S - Socket Formed Hoods: 0- No Hood. 3- Hood, top opening, style #0300, for use with Type “C” or “D” jackscrews. 4- Hood, side opening, style #0400, for use with Type “C” or “D” jackscrews. 5- Hood, top opening, style #0500J, for use with “F” style jackscrews. 6- Hood, side opening, style #0600J, for use with “F” style jackscrews. Deep Drawn Hoods: 7- Hood, top opening, style #0700, for use with Type “C” or “D” jackscrews. 8- Hood, side opening, style #0800, for use with Type “C” or “D” jackscrews. 9- Hood, top opening, style #0900, for use with “F” jackscrews. 2- Hood, side opening, style #0200, for use with “F” jackscrews. Note: Addition of “X” to code # indicates cable opening larger than std. See hoods for cable opening size. Example: TXAC20PC1A300 X ■ Step 7 Jackscrews and Jacksockets * M- Polarized short turnable jackscrew and jacksocket. Cannot be used with hoods. * C- Polarized long turnable jackscrew and jacksocket for use with hoods. * D- Polarized one-piece mono-jackscrew and mono-jacksocket (no separate knob); to be used with hoods on sizes: 34, 42, and 50. * F- Polarized fixed jackscrew and jacksocket usable with or without hood (no knob required). Sizes: 34, 42, and 50. MW- Same as M but with knurled round knob with internal hex. MU- Same as M but with knurled round knob with screwdriver slot. MX- Same as M but with hex knob. CW- Same as C but with knurled round knob with internal hex. CU- Same as C but with knurled round knob with screwdriver slot. CX- Same as C but with hex knob. CZ- Same as C but with prybar knob. * Request availability information *** Material Nickel plated brass - standard ■ Step 4 All dimensions for TXAC housing are the same as MRAC housings. All hoods, shells, hardware, and accesories used on the TXAC Series are the same as those used on the XAC Series. See the XAC Series section for part numbers and dimensions. Note the TXAC Series maximum number of contacts is 50. Note: 1. Contacts are ordered separately. See 100 Series contact section of Rack & Panel TXAC Series Ordering Infomation Dimensions RP / 24 www.winconn.com

The MRA Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current and voltage ratings for their size. Performance tests show them to well exceed military standards. Except for contact size, the MRA and MRE Series share the same hoods, hardware and accessories. Right angle, dip solder, pin or socket contacts are available. Consult factory. Dimensions are for reference only and are subject to change. Outline drawings on request. HoodPlug MRA 34P-GReceptacle MRA 34S-G Dielectric: Gray glass filled diallyl phthalate, per MIL-M-14, SDG-F. Polarization: Gold plated guides provide polarization. Polarized nickel- plated brass and/or passivated stainless steel jackscrews with anodized aluminum knobs are available. Hoods: Anodized aluminum. May be applied to either plug or receptacle. Both top and side opening hoods available. Current Rating: 13 amps Number of contacts: 9, 14, 20, 34, 41, 42, 50, 50- 8, 66, 75, 104 Pin Contacts: .062 diameter, gold plated brass Socket Contacts: Phosphor bronze, gold plated Terminations: .070 dia. solder cup is standard. Will accommodate up to #16 AWG stranded wire. Pin and Socket contacts available with .030 diameter dip solder termina- tions. Consult Sales Dept. for lengths available. Electrical Data: Meets high potential performance of MIL-C-28748. Military versions are QPL’d to M28748/1 and M28748/2. The minimum dielectric withstanding voltage is one minute electrification 1000 VAC, sea level. RP / 25 www.winconn.com Specifications Miniature Rectangular / #16 Contacts / .062" Dia. / 13 Amps MRA Series

9 14 20 34 41 42 50 50-8 66 75 104 Dip Solder For pin and socket contacts, .030 diameter dip solder terminations, straight or right angle for mounting to printed circuit board or for use with flexible cable. Solder Cup For pin and socket contacts, .070 diameter solder cup is the standard termination for cable and panel mount applications. Wire accommodation: up to #16 AWG stranded.

3 Types of Guide Sockets are Available

The “K” guide socket is an excellent electrical conductor. Its extra spring-tension provides a high normal force uniformily distributed along the surface of the engaged pilot guide, thus minimizing electrical resistance. The multivolt drop across extreme ends of the engaged pilot and socket guide is 10 mv. at 20 amps. The “G” type socket is the standard guide supplied. It has good physical strength and may be used electrically in a low current circuit or as a contact for ground leads. The high physical strength of the “N” guide socket allows a greater degree of forcible tightening against a mounting surface than is permitted by the other guide sockets. This feature is particularly desirable for mounting connectors which will be subject to severe vibration in service. “N” guides are not to be used electrically. N Type For extra Mechanical Strength Brass Standard Guide Pin mates with all types Brass NUMBER OF CONTACTSWEIGHT IN OZ. PLUG RECEPTACLE MRA-50-8 with 8, 20 amp solder cup contacts and 50, 13 amp solder cup contacts CONTACTS CURRENT PIN MAX. WIRE SOLDER RATING DIAMETER SIZE CUP DIA 8 20 amps .093 #12 AWG .106 D .50 13 amps .062 #16 AWG .070 D * For passivated stainless steel add SS suffix MRA Series Termination Types Guide Sockets Physical Data Special RP / 26 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. Drawings and corresponding part numbers show G type guide sockets. .37 1.313 1.000 .070 Dia. Solder Cup .37 .27 .86 .78 .37 .27 4-40 UNC-2A THD. Slot .038 Wide Plug MRA 9P-G Receptacle MRA 9S-G Receptacle MRA 14S-G .44 1.250 .937 .075 Typ. .130 Typ. .070 Dia. Solder Cup .150 Typ. .168 Typ. 4-40 UNC-2 THD. Type .86 .37.27 .062 Dia. Slot .038 Wide .78 .37 .27 Plug MRA 14P-G Receptacle MRA 20S-G Plug MRA 20P-G .44 .062 Dia. 1.563 1.250 .130 Typ. .075 Typ. .150 Typ. .175 Typ. 4-40 UNC-2 THD. Type Slot .038 Wide .86 .37.27 .27 .78 .37 Receptacle MRA 41S-G Plug MRA 41P-G Slot .038 Wide 4-40 UNC-2 THD. Type .070 Dia. Solder Cup .44 2.625 .070 Dia. Solder Cup .86 .27 2.312 .27.37 .78 .37 .75 .23 .47 1.688 2.000 .070 Dia. Solder Cup .27 .37 .86 Slot .038 Wide4-40 UNC-2 THD. Type Plug MRA 34P-G Receptacle MRA 34S-G .27.37 .78 .172 Typ. .150 Typ. .130 Typ. Mounting Holes For No. 4 Machine Screws .180 Typ. .075 Typ. .075 Typ. MRA Series RP / 27 www.winconn.com Outline

.070 Dia. Solder Cup .75 .47 .23 2.313 2.000 4-40 UNC-2 THD. Slot .038 Wide .070 Dia. Solder Cup .27 .37 .09R .86 .78 .27 .062 Dia. .75 .88 .23 .47 2.282 2.594 2.719 4-40 UNC-2 THD. Slot .038 Wide .86 .27 .37 .09 .14 .37 .27 .78 Plug MRA 50P-G Receptacle MRA 50S-G Plug MRA 42P-G Receptacle MRA 42S-G .37 Plug MRA 50-8P-G Receptacle MRA 50-8S-G .25 1.125 .50 1.969 2.281 .16 4-40 UNC-2A THD. Slot .038 Wide .106 Dia. Solder Cup .070 Dia. Solder Cup .78 .37 .27.27 .86 .37 Plug MRA 66P-G Receptacle MRA 66S-G .16 4-40 UNC-2 THD. Slot .038 Wide 1.125 .25 .50 .31R .13 2.281 1.969 .27 .37 .86 .070 Dia. Solder Cup .37 .27 .78 1.531 .88 .44 2.375 2.750 4-40 UNC-2 THD. 1.234 1.109 .77 .23 2.282 2.594 2.719 Plug MRA 75P-G Receptacle MRA 75S-G 4-40 UNC-2 THD. Slot .038 Wide .86 .27 .37 .09 .14 .78 .27.37 Plug MRA 104P-JT Receptacle MRA 104S-J .27 .16 .16 .98 .788-32 UNC-2A Thd. .560 .37 .038 Dia. hole for safety wire .560 .37 .075 Typ. Mounting Holes For No. 4 Machine Screws .180 Typ. .075 Typ. .180 Typ.Mounting Holes For No. 4 Machine Screws .150 Typ. .180 Typ.Mounting Holes For No. 4 Machine Screws .075 Typ. Mounting Holes For No. 4 Machine Screws .180 Typ. .075 Typ. .180 Typ. .150 Typ. .180 Typ.Mounting Holes For No. 4 Machine Screws Dimensions are for reference only and are subject to change. Outline drawings on request. Drawings and corresponding part numbers show G type guide sockets. MRA Series Outline RP / 28 www.winconn.com

.78 .98 for size 104 6-32 UNC 2 Thread except size 104 which is 8-32 UNC2 .16 .16 Hood E Self Locking Pin Mono- Jacksocket F .052 Dia. Safety Wire Hole Mono- Jackscrew BA The drawings show the extension of the jack- screw knobs beyond a typical MRA connector and beyond the connector-and-hood assembly (center drawings). Dimensions given are constant for all connectors except as noted. Other dimensions applicable to various hood styles are detailed in the chart. Polarized jackscrews give the ease and assur- ance of threaded positive coupling. The actuating side consists of two turnable screws, one male and one female, each with knurled and slotted knobs. On the mating half are the two fixed screws required to complete the locking action. When mated, the jackscrews may be locked with a safety wire through the hole in the self-locking pin (in the jackscrew shaft). MOLDINGS HAVE STRAIGHT THRU HOLES MONOJACKS ARE CAPTIVATED IN KEYHOLE SLOT OF HOOD AS SHOWN ABOVE. WHEN USING SHELLS, MONOJACKS ARE CAPTIVATED IN KEYHOLE OF SHELL AND CLEARANCE HOLES ARE PLACED IN HOODS. Dimension E Dimension F H H1 H8 H9 H H1 H8 H9 Dimension A Dimension B H H1 H8 H9 H H1 H8 H9 Connec- tor Size Dimen C Dimen D New Monojacks Assemble and Disassemble With Remarkable Ease and Speed To free the connector from the hood, simply remove four screws. Monojacks may be used on miniature rectangular connectors with from 34 to 104 contacts, molds have 2 center thru holes and 4 mounting holes. Dimensions are for reference only and are subject to change. Outline drawings on request. Connector with fixed Jackscrews. Code designation: J Mating connector half with turnable Jackscrews-with-Knobs. Code designation: JT Mating connector half with Hood and turnable Long Jackscrews-with Knobs. Code designation: JTCH, JTCH1 Mating connector half with Hood and turnable Monojacks. Code designation: JTDH, JTDH1 MRA Series RP / 29 www.winconn.com Jackscrews & Jacksockets Dimensions

9 – 2.22 1.91 2.22 14 – 2.22 1.66 2.22 20 – 2.22 1.66 2.22 34 2.22 2.22 2.22 2.22 41 2.22 2.22 – – 42 2.22 2.22 2.22 2.22 50 2.22 2.22 2.22 2.22 50-8 2.22 – – 2.22 66 2.22 – – 2.22 75 2.22 2.22 2.22 2.22 HH 1H 8H 9 Dimension A 9 – 2.47 2.16 2.47 14 – 2.47 1.91 2.47 20 – 2.47 1.91 2.47 34 2.47 2.47 2.47 2.47 41 2.47 2.47 – – 42 2.47 2.47 2.47 2.47 50 2.47 2.47 2.47 2.47 50-8 2.47 – – 2.47 66 2.47 – – 2.47 75 2.47 2.47 2.47 2.47 Size Size HH 1H 8H 9 Dimension A 9 – 2.34 2.03 2.34 14 – 2.34 1.78 2.34 20 – 2.34 1.78 2.34 34 2.34 2.34 2.34 2.34 41 2.34 2.34 – – 42 2.34 2.34 2.34 2.34 50 2.34 2.34 2.34 2.34 50-8 2.34 – – 2.34 66 2.34 – – 2.34 75 2.34 2.34 2.34 2.34 HH 1H 8H 9 Dimension A 9 – 2.47 2.16 2.47 14 – 2.47 1.91 2.47 20 – 2.47 1.91 2.47 34 2.47 2.47 2.47 2.47 41 2.47 2.47 – – 42 2.47 2.47 2.47 2.47 50 2.47 2.47 2.47 2.47 50-8 2.47 – – 2.47 66 2.47 – – 2.47 75 2.47 2.47 2.47 2.47 Type JTCW All jackscrews and sockets are stainless steel, passivated, except J & JTD which are nickel-plated brass. All knobs are aluminum, anodized except JTW and JTCW which are stainless steel, passivated. Hood Type Type JTCU Type JTCX Type JTCZ Dimensions are for reference only and are subject to change. Outline drawings on request. .19 Dia. .078 Int. Hex. JTCW JTCU JTCX JTCZ JTUJTW JZJTX A Typ. A Typ. .22 Dia. A Typ. .25 Hex A Typ. .22 Dia..50 .19 Dia. .078 Int. Hex .36 .22 Dia. .78 .25 Hex 6-32 UNC 2 THD. (Typ) 6-32 UNC 2 THD. (Typ) .80 Typ. .16 Typ. MRA Series Outline Jackscrews & Jacksockets Dimensions RP / 30 www.winconn.com

Code No. Dimensions Cable Opening Wt. Oz. Fits ConnectorAB C DE FG H and H-8 Cable Clamps (Top Opening) Code No. Dimensions Cable Opening Wt. Oz. Fits ConnectorA BCD EF G H-1 and H-9 Cable Clamps (Side Opening) * H Hoods for MRA 9, 14, and 20 will not accept JTC hardware. Use H8 hoods. ABCD E FG DIMENSIONS – TOP OPENING Wt. Oz. Style “Z” “Y” “Y” “Y” Fits Connector MRA 34P MRA 34S MRA 50-8P MRA 50-8S MRA 66P MRA 66S MRA 104P MRA 104S ABC D E H G DIMENSIONS – SIDE OPENINGCatalog No. Style “Z” “Y” “Y” “Y” Fits Connector MRA 34P MRA 34S MRA 50-8P MRA 50-8S MRA 66P MRA 66S MRA 104P MRA 104S Wt. Oz. MRE Series hoods for use with MRA Series connectors Side Cable OpeningTop Cable Opening Catalog No. Side Cable OpeningTop Cable Opening A B C E (cable opening) H A D G “Y” Style EG B C D “Z” Style .228 Dia. 2 Holes For 104* .191 Dia. 2 Holes* Dimensions are for reference only and are subject to change. Outline drawings on request. .08 .08 .08 MRA Series RP / 31 www.winconn.com Outline Hoods- Drawn Aluminum Outline Hoods- Formerd Aluminum Dimensions Dimensions

Vibration Locks* Vibration locks offer simplicity of design and positive locking in excess of 50G shock impact and 10G vibration acceleration. Mating halves automatically lock when engaged. To unlock, depress the levers. Drilled holes in the levers are provided for safety wiring. Vibration locks are available separately for assembly on connectors now in service. Each code number indicates two units: two levers with two pivots, and two lock tabs. *US Patent Number 2760174 Lever & Pilot Assembly MRE-VL MRE-VL2 Lock Tabs (See Note) MRE-V MRE-V2 Used on Connectors MRA 9, 14, 20, 34, 41, 42, 66 MRA 50,75 Note: When panel mounting the lock-tab half of a MRA 34, MRA 42 or MRA 50 and MRA 66 connector, flat washers (.033 minimum thickness) should be used on the mounting screws to shim the moulding away from the panel. Each form matches the back opening contour of its appropriate shell, and stays easily in place during the potting operation. Of negligible weight, it need not be removed from the connector after potting. Because of floating contacts, connector halves should always be engaged during the potting operation to preserve contact alignment. Potting Form Fig. Code No. A B MRA 9 FM 3 .77 .43 MRA 14 FM 2 .93 .49 MRA 20 FM 2 1.12 .49 MRA 26 FM 2 1.18 .61 MRA 34 FM 1 1.38 .80 MRA 41 FM 2 2.18 .49 MRA 42 FM 1 1.69 .80 MRA 50 FM 1 1.97 .80 MRA 75 FM 1 1.98 1.16 Dimensions Code No. DIMENSIONS ABC D E F G H .128 Dia 3 Holes (No. 4 Mounting Screw) .150 Dia 3 Holes (No. 6 Mounting Screw) Wt. Oz. Lock Tabs (MRE-V shown) Lever & Pivot Assemblies (MRE-VL shown) Dimensions are for reference only and are subject to change. Outline drawings on request. Figure 1 Figure 2 Figure 3 A A A B B B H A B C D E F G 2.625 .11R Panel Opening MRA 50 and MRA 75 connectors use the standard MRE 50 and MRE 75 mounting brackets MRA Series Hoods - Locking Dimensions / Outline Mounting Brackets Dimensions / Outline Pre-Shaped Nylon Potting Forms RP / 32 www.winconn.com

H ■ Step 1 Insert Series Code By adding “ML” to the series code, connector is supplied with diallyl phthalate type SDG-F and mil plated contacts. Example: MRAML ■ Step 3 Contact Designation: P - Pin S - Socket When ordering molding less hardware to be used with mono-jacks, see Note below. ■ Step 4 Type of Contact: Blank = Standard Solder Cup Straight Dip Solder .030" dia.: D3 = .094" D4 = .125" D5 = .156" For additional lengths in 1/32" increments, contact Winchester’s Sales Department. ■ Step 5 Guides and Jackscrew Locks: (See bottom Chart) ■ Step 6 Hoods: H - Standard Top Opening* H1 - Standard Side Opening H8 - Large Top Opening H9 - Large Side Opening See Hood Section for Availability *(Note: H Hoods for MRA 9, 14 and 20 will not accept JTC hardware. Use H8 hoods.) ■ Step 7 Vibration Locks: V - Lock Tab V2 - Lock Tab (Size 50 & 75) VL - Lever & Pivot Ass’y VL2 - Lever & Pivot Ass’y (Size 50 & 75) ■ Step 8 Accessories: FM - Potting Forms. Cannot be Used with Hoods. Request availability informa- tion. ■ Step 9 Special Options: Consult Sales Department Guides *G Phosphor Bronze Cylindrical Guides* *K Beryllium Copper Cylindrical Guides *N Brass Cylindrical Guides* Guides are not recommended for Size 104 “P” indicates two guide pins or two jackscrews (EX. JTCP) “S” indicates two guide sockets or two jacksockets. (Ex. GS) Jackscrew Locks *** J Polarized Fixed Jackscrew and Jacksocket JT Polarized Short Turning Jackscrew and Jacksocket JTC Polarized Long Turning Jackscrew and Jacksocket JTD Polarized Long Turning Mono-Jackscrew and Mono-Jacksocket for Sizes 34, 42, 50, 66, 75, and 104 only. ■ Step 5 * For passivated stainless steel add SS suffix. ( Example: MRA34SGSS) Mounting Note: Connectors MRA 9, MRA 14, MRA 20 and MRA41 use guides or fixed jacks for mounting in a hood or on a panel. Connectors MRA 34, MRA 42, MRA 50, MRA 66, MRA 75 use four #4 machine screws, and MRA 104 uses four #6 machine screws for mounting in a hood or on a panel. Guides are not recom- mended for use with MRA 104. MRA 34 S GV L Note: When ordering hoods, hardware and connectors separately for use with JTD Monojacks, connec- tors must be ordered as follows: Pin connector = MRA34P8, MRA42P8, etc. Socket connector = MRA34S8, MRA42S8, etc. The number “8” indicates special housing for use with the JTD Monojack hardware (available on sizes 34, 42, 50, 66, 75 and 104). JZ Same as J but with 6-32 mtg. thd. (Std. on 104) JTW Same as JT but with knurled round knob with internal hex (not avail. 104) JTU Same as JT but with knurled round knob with screwdriver slot (not avail. 104) JTX Same as JT but with hex knob (not avail. 104) JTCW Same as JTC but with knurled round knob with internal hex (not avail. 104) JTCU Same as JTC but with knurled round knob with screwdriver slot (not avail. 104) JTCX Same as JTC but with hex knob (not avail. 104) JTCZ Same as JTC but with prybar knob (not avail. 104) Request availablity information. *Material: Nickel-plated brass - standard. ■ Step 2 Number of Contacts: 9, 14, 20, 34, 41, 42, 50, 50-8, 66, 75, 104 *** MRA Series RP / 33 www.winconn.com

Receptacle MRE 14S-G Plug MRE 14P-G Hood MRE 14H MRE Series plugs and receptacles are the accepted standard for rectangular-shaped, miniature, internal-type connectors. They embody all of the features expected of true miniaturization: maximum utility of space, extremely lightweight and unusually high working voltage and current ratings. Their long life and trouble-free service continue to make them highly popular for use in aircraft, instrumentation and portable equipment. The MRE and MRA series share the same hoods, hardware and accessories. Current Rating: 7.5 amps No. of Contacts: 7, 8, 26, 34, 41, 42, 50, 75, 104 Pin Contacts: .040 dia., gold plated brass Socket Contacts: Phosphor bronze plated gold. Termination Types: .048 dia. solder cup is standard. It will accept up to #20 AWG stranded wire. Pin and Socket Contacts available with dip solder terminations, .025 Dia. Check Sales Dept. for lengths available. Electrical Data: Meets high potential performance requirements of MIL-C-28748. Military versions are QPL’d to M28748/5 and M28748/6. The dielectric withstanding voltage is one minute at 1200 volts. Dielectric: Brown mineral filled diallyl phthalate. Also available in gray glass filled diallyl phthalate, per MIL-M-14, SDG-F. Polarization: Gold plated guides provide positive polarization. Polarized nickel-plated brass and/or passivated stainless steel jackscrews with anodized aluminum knobs are available. Hoods: Anodized aluminum. May be applied to either plug or receptacle. Both top and side openings are available. MRE Series Miniature Rectangular / #20 Contacts / .040" Dia. / 7.5 Amps Specification RP / 34 www.winconn.com

For mounting on printed circuit boards, .025 diameter straight dip solder terminations (for Pin Contacts and Socket Contacts) are available. Consult the Sales Department for available lengths. Solder Cup .048 diameter solder cup is the standard termination for cable and panel mounting applications. It will accept up to #20 AWG stranded wire. The “K” guide socket is an excellent electrical conductor. Its extra spring-tension provides a high normal force uniformily distributed along the surface of the engaged pilot guide, thus minimizing electrical resistance. The multivolt drop across extreme ends of the engaged pilot and socket guide is 10 mv. at 20 amps. The “G” type socket is the standard guide supplied. It has good physical strength and may be used electrically in a low current circuit or as a contact for ground leads. The high physical strength of the “N” guide socket allows a greater degree of forcible tightening against a mounting surface than is permitted by the other guide sockets. This feature is particularly desirable for mounting connectors which will be subject to severe vibration in service. “N” guides are not to be used electrically. N Type For extra Mechanical Strength Brass Standard Guide Pin mates with all types Brass Plug Winchester Electronics Code No. 7 MRE 7P-G MRE 7S-G 7 none .3 .3 8 MRE 8P-N MRE 8S-N 8 none .2 .2 9 MRE 9P-G MRE 9S-G 9 none .3 .3 11 MRE 11 P-G MRE 11S-G 11 none .3 .3 14 MRE14P-G MRE 14S-G 14 none .3 .3 18 MRE 18P-G MRE 18S-G 18 none .4 .4 20 MRE 20P-G MRE 20S-G 20 none .5 .4 21 MRE 21P-G MRE 21S-G 21 none .5 .5 Rec.Plug Weight Oz. No. Standard Contacts,

10 Amps

(.052 dia. solder cup for #18 AWG) Recept. Winchester Electronics Code No. Total No. of Contacts Plug Winchester Electronics Code No. Rec.Plug Weight Oz. No. Standard Contacts, (.052 dia. solder cup for #18 AWG) Recept. Winchester Electronics Code No. Total No. of Contacts26 MRE 26P-G MRE 26S-G 26 none .6 .5 34 MRE 34P-G MRE 34S-G 34 none .8 .7 41 MRE 41P-G MRE 41S-G 41 none .8 .6 42 MRE 42P-G MRE 42S-G 42 none .9 .8 50 MRE 50P-G MRE 50S-G 50 none 1.0 .9 75 MRE 75 P-G MRE 75S-G 75 none 1.5 1.3 104 MRE 104P-JT MRE 104S-G 104 none 3.3 2.2 No. Standard Contacts,

7.5 Amps

(.048 dia. solder cup for #20 AWG) No. Standard Contacts, (.048 dia. solder cup for #20 AWG) HOW TO ORDER: To obtain “K” or “N” guides in place of the standard “G” type, substitute the desired socket style code letter (“K” or “N”) for “G” in both the Plug and Receptacle Code Numbers. (See Code Numbers in table at right. * For passivated stainless steel add SS suffix MRE Series RP / 35 www.winconn.com Termination Types Guide Forms Physical Data

Dimensions are for reference only and are subject to change. Outline drawings on request. .37 .09 R .13 .906 1.219 .86 .27 .37 4-40 NC-2 THD. Slot .038 Wide .37 .27 .78 Receptacle MRE 7S-G Plug MRE 7P-G Receptacle MRE 9S-G Plug MRE 9P-G Receptacle MRE 8S-N Plug MRE 8P-N .37 .09 R .750.562 .20 .37 .75 4-40 NC-2 THD. Slot .020 Wide .72 .37 .20 Note: For MRE8, "G" guides not available .37 .09 R .11 1.000 1.313 .86 .27 .37 4-40 NC-2 THD. Slot .038 Wide .78 .37 .27 .075 Typ. .172 Typ. .070 Typ. .09 R .094 Typ. .075 Typ. .172 Typ. MRE Series Outline RP / 36 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. 1.250 .44 .86 .27 .37 4-40 NC-2 THD. SLOT 0.38 WIDE .78 .37 .27 .56 .09R 1.000 .06 .13R .27 .37 .86 SLOT .038 WIDE .78 Receptacle MRE 18S-N Plug MRE 18P-N Receptacle MRE 14S-G Plug MRE 14P-G Receptacle MRE 20S-N Plug MRE 20P-N 4-40 NC-2 THD. 1.250 1.560 .06 Receptacle MRE 21S-N Plug MRE 21P-N SLOT .038 WIDE.13R .37 .13 2.250 1.937 4-40 NC-2 THD. Receptacle MRE 26S-N Plug MRE 26P-N Receptacle MRE 34S-N Plug MRE 34P-N .13 2.000 .09R .27 .37 .75 .23 .47 .37 .27 SLOT .038 WIDE .78.86 SLOT 0.38 WIDE 4-40 NC-2 THD. 4-40 NC-2 THD. .37 .27 SLOT 0.38 WIDE 1.313 .937 .06 .86 .78 .27 .37 .37 .27 .78.86 .78.86 1.688 .56 1.625 1.312 4-40 NC-2 THD. .075 Typ. .13R .09R .130 Typ. .075 Typ. .130 Typ. .075 Typ. .09R .130 Typ. .075 Typ. .13R .075 Typ. .130 Typ. .075 Typ. MOUNTING HOLES FOR NO.4 MACHINE SCREWS .180 Typ. .172 MRE Series RP / 37 www.winconn.com Outline

Dimensions are for reference only and are subject to change. Outline drawings on request. Receptacle MRE 41S-N Plug MRE 41P-N SLOT 0.38 WIDE 4-40 NC-2 THD. .44 .06 .27 .37 .86 .37 .27 .78 SLOT 0.38 WIDE4-40 NC-2 THD. .23 .47 .09R .16 .27 .37 .37 .27 Plug MRE 42P-G Receptacle MRE 42S-G Plug MRE 50P-N Receptacle MRE 50S-N Receptacle MRE 75S-N Plug MRE 75P-N SLOT 0.38 WIDE 4-40 NC-2 THD. 2.282 1.109 1.234 .77.23 .86 .27 .37 .13.094 .78 .37 .27 4-40 NC-2 THD. SLOT 0.38 WIDE .88 .16R.23 .16R .27 .09 .27 Receptacle MRE 104S-JT Plug MRE 104P-J

062 DIA HOLE

.44 .37 8-32 UNC 2A THD 6-32 UNC 2A THD .27.37 Receptacle MRE 11S-G Plug MRE 11P-G SLOT 0.38 WIDE4-40 NC-2 THD. .09R 2.625 2.312 .75 2.313 2.000 .86 .78 .78 .37 2.281 2.594 2.719 .86 .781 1.094 1.531 .88 2.375 2.750 2.719 2.594 .13 .78.78 .16 .75 .47 .86 .37 1.359 .16 .075 Typ. .180 Typ. MOUNTING HOLES FOR NO.4 MACHINE SCREWS .13R .09R .130 Typ. .075 Typ. .075 Typ. MOUNTING HOLES FOR NO.4 MACHINE SCREWS .180 Typ. .075 Typ. .16R MOUNTING HOLES FOR NO.4 MACHINE SCREWS .180 Typ. .075 Typ. .13R .130 Typ. MOUNTING HOLES FOR NO.4 MACHINE SCREWS .075 Typ. .180 Typ. MRE Series Outline RP / 36 www.winconn.com

C Dimension E Dimension F H H1 H8 H9 H H1 H8 H9 Dimen D Connector with fixed Jackscrews. Code designation: J Mating connector half with turnable Jack- screws-with-Knobs. Code designation: JT Mating connector half with Hood and turnable Long Jackscrews- with Knobs. Code designation: JTCH, JTCH1 Mating connector half with Hood and turnable Monojacks. Code designation: JTDH, JTDH1 New Monojacks Assemble and Disassemble With Remarkable Ease and Speed To free the connector from the hood simply remove four screws. Monojacks may be used on miniature rectangular connectors with from 34 to 104 contacts. Molds have 2 center thru holes and 4 mounting holes. MONOJACKS ARE CAPTIVATED IN KEYHOLE SLOT OF HOOD AS SHOWN ABOVE. WHEN USING SHELLS, MONOJACKS ARE CAPTIVATED IN KEYHOLE OF SHELL AND CLEARANCE HOLES ARE PLACED IN HOODS.MOLDINGS HAVE STRAIGHT THRU HOLES Dimensions are for reference only and are subject to change. Outline drawings on request. 4-40 NC-2 THD. EXCEPT SIZE 104 WHICH IS 6-32 NC 2 JACKSOCKET JACKSCREW AND OR OR .98 For Size 104 .78 6-32 UNC 2 THREAD EXCEPT SIZE 104 WHICH IS 8-32 UNC 2 .16 HOOD BA C D E E 052 DIA SAFETY WIRE HOLESELF LOCKING PIN.16 The drawings show the extension of the jackscrew knobs beyond a typical MRA connector and beyond the connector-and-hood assembly (center drawings). Dimensions given are constant for all connectors except as noted. Other dimensions applicable to various hood styles are detailed in the chart. Polarized jackscrews give the ease and assurance of threaded positive coupling. The actuating side consists of two turnable screws, one male and one female, each with knurled and slotted knobs. On the mating half are the two fixed screws required to complete the locking action. When mated, the jackscrews may be locked with a safety wire through the hole in the self-locking pin (in the jackscrew shaft). MONO JACKSCREW MONO JACKSOCKET MRE Series RP / 39 www.winconn.com Jackscrews & Jacksockets Dimensions

All jackscrews and sockets are stainless steel, passivated, except for J & JTD which are nickel-plated brass. All knobs are aluminum, anodized except JTW and JTCW which are stainless steel, passivated. Hood Type HH 1H 8H 9 Dimension A 7 – 2.16 2.16 – 9 – 2.47 2.16 2.47 14 – 2.47 1.91 2.47 18 – 2.47 1.91 2.47 20 – 2.47 1.91 2.47 21 2.16 2.47 2.16 2.47 26 2.47 2.47 2.47 2.47 34 2.47 2.47 2.47 2.47 41 2.47 2.47 – – 42 2.47 2.47 2.47 2.47 50 2.47 2.47 2.47 2.47 75 2.47 2.47 2.47 2.47 Size Size HH 1H 8H 9 Dimension A 7 – 1.91 1.91 – 9 – 2.22 1.91 2.22 14 – 2.22 1.66 2.22 18 – 2.22 1.66 2.22 20 – 2.22 1.66 2.22 21 1.91 2.22 1.91 2.22 26 2.22 2.22 2.22 2.22 34 2.22 2.22 2.22 2.22 41 2.22 2.22 – – 42 2.22 2.22 2.22 2.22 50 2.22 2.22 2.22 2.22 75 2.22 2.22 2.22 2.22 Size HH 1H 8H 9 Dimension A 7 – 2.03 2.03 – 9 – 2.34 2.03 2.34 14 – 2.34 1.78 2.34 18 – 2.34 2.03 2.34 20 – 2.34 1.78 2.34 21 2.03 2.34 2.03 2.34 26 2.61 2.34 2.34 2.34 34 2.34 2.34 2.34 2.34 41 2.34 2.34 – – 42 2.34 2.34 2.34 2.34 50 2.34 2.34 2.34 2.34 75 2.34 2.34 2.34 2.34 Type JTCX SizeType JTCW Type JTCU HH 1H 8H 9 Dimension A 7 – 2.16 2.16 – 9 – 2.47 2.16 2.47 14 – 2.47 1.91 2.47 18 – 2.47 2.16 2.47 20 – 2.47 1.91 2.47 21 2.16 2.47 2.16 2.47 26 2.77 2.47 2.47 2.47 34 2.47 2.47 2.47 2.47 41 2.47 2.47 – – 42 2.47 2.47 2.47 2.47 50 2.47 2.47 2.47 2.47 75 2.47 2.47 2.47 2.47 Type JTCZ .19 DIA .078 INT. HEX. JTCZJTCW A A .50 .22 DIA. A .25 HEX. .22 DIA. JTCX JTCU JTU JTW JTX JZ .22 DIA..22 DIA. .078 INT. HEX. A .36 .25 HEX. .78 .80 TYP. .16 TYP. 6-32 UNC 2 THD. (TYP.) 6-32 UNC 2 THD. (TYP.) Dimensions are for reference only and are subject to change. Outline drawings on request. MRE Series Outline Jackscrews & Jacksockets Dimensions RP / 40 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. Top Cable Opening MRA104H-9 FOR DIMENSIONS SEE PAGE RP/36 Code No. Dimensions Cable Opening Wt. Oz. Fits ConnectorAB C DE FG Code No. Dimensions Cable Opening Wt. Oz. Fits ConnectorAB C DE FG MRA104H FOR DIMENSIONS SEE PAGE RP/36 * H Hoods for MRE 7, 8, 9, 14, 18 and 20 will not accept JTC hardware. Use H8 hoods. Side Cable Opening MRE Series RP / 41 www.winconn.com Outline Hoods- Formed Aluminum Dimensions

& Pilot Assembly MRE-VL MRE-VL2 Lock Tabs (See Note) MRE-V MRE-V2 Used on Connectors MRA 9, 14, 20, 34, 41, 42, 66 MRE 50,75 Note: When panel mounting the lock-tab half of a MRE 34, MRE 42 or MRE 50 and MRE 66 connector, flat washers (.033 minimum thickness) should be used on the mounting screws to shim the molding away from the panel. Code No. DIMENSIONS AB CD E F G H .128 Dia 3 Holes (No. 4 Mounting Screw) .150 Dia 3 Holes (No. 6 Mounting Screw) Wt. Oz. Potting Form Fig. Code No. A B MRE 7 FM 3 .62 .43 MRE 8 FM 2 .46 .43 MRE 9 FM 3 .77 .43 MRE 14 FM 2 .93 .49 MRE 18 FM 2 .87 .61 MRE 20 FM 2 1.12 .49 MRE 21 FM 3 1.68 .43 MRE 26 FM 2 1.18 .61 MRE 34 FM 1 1.38 .80 MRE 41 FM 2 2.18 .49 MRE 42 FM 1 1.69 .80 MRE 50 FM 1 1.97 .80 MRE 75 FM 1 1.98 1.16 Dimensions Lock Tabs (MRE-V shown) Lever & Pivot Assemblies (MRE-VL shown) Dimensions are for reference only and are subject to change. Outline drawings on request. Each form matches the back opening contour of its appropriate shell, and stays easily in place during the potting operation. Of negligible weight, it need not be removed from the connector after potting. Because of floating contacts, connector halves should always be engaged during the potting operation to preserve contact alignment. are provided for safety wiring. Vibration locks are available separately for assembly on connectors now in service. Each code number indicates two units: two levers with two pivots, and two lock tabs. *US Patent Number 2760174 Vibration Locks* Vibration locks offer simplicity of design and positive locking in excess of 50G shock impact and 10G vibration acceleration. Mating halves automatically lock when engaged. To unlock, depress the levers. Drilled holes in the levers Figure 1 Figure 2 Figure 3 A A A B B B H A B C D E F G 2.625 .11R Panel Opening MRE 50 and MRE 75 connectors use the standard MRE 50 and MRE 75 mounting brackets MRE Series Hoods - Locking Dimensions / Outline Mounting Brackets Dimensions / Outline Pre-Shaped Nylon Potting Forms RP / 42 www.winconn.com

H ■ Step 4 Type of Contact: Blank = Standard Solder Cup Straight Dip Solder .025" dia.: D3 = .094" D4 = .125" D5 = .156" For additional lengths in 1/32" increments, contact Winchester’s Sales Department. ■ Step 5 Guides and Jackscrew Locks: (See bottom Chart) ■ Step 6 Hoods: H - Standard Top Opening* H1 - Standard Side Opening H8 - Large Top Opening H9 - Large Side Opening *For MRE 7, 8, 9, 14, 18 and 20, JTC hardware may not be used with H hoods. Use H8 hoods. ■ Step 7 Vibration Locks: V - Lock Tab V2 - Lock Tab (Size 50 & 75) VL - Lever & Pivot Ass’y VL2 - Lever & Pivot Ass’y (Size 50 & 75) ■ Step 8 Accessories: FM - Potting Forms. Cannot be Used with Hoods. Request availability informa- tion. ■ Step 9 Special Options: Consult Sales Department Guides *G Phosphor Bronze Cylindrical Guides* *K Beryllium Copper Cylindrical Guides *N Brass Cylindrical Guides* Guides are not recommended for Size 104 “P” indicates two guide pins or two jackscrews (Ex. JTCP) “S” indicates two guide sockets or two jacksockets. (Ex. GS) Jackscrew Locks ***J Polarized Fixed Jackscrew and Jacksocket JT Polarized Short Turning Jackscrew and Jacksocket JTC Polarized Long Turning Jackscrew and Jacksocket JTD Polarized Long Turning Mono-Jackscrew and Mono-Jacksocket for Sizes 34, 42, 50, 75, and 104 only. ■ Step 5 MRE 34 S GV L * For passivated stainless steel add SS suffix (Example: MRE34SGSS) Mounting Note: Connectors MRE 41, MRE 26, and smaller use guides for mounting in a hood or on a panel. Connectors MRE 34, MRE 42, MRE 50, MRE 75, use four #4 machine screws, in addition to guides, for mounting in a hood or on a panel. JZ Same as J but with 6-32 mtg. thd. (Not available 5-3, 8) (Std. on 104) JTW Same as JT but with knurled round knob with internal hex (not avail. 5-3, 8, 104) JTU Same as JT but with knurled round knob with screwdriver slot (not avail. 5-3, 8, 104) JTX Same as JT but with hex knob (not avail. 5- 3, 8, 104) JTCW Same as JTC but with knurled round knob with internal hex (not avail. 5-3, 8, 104) JTCU Same as JTC but with knurled round knob with screwdriver slot (not avail. 5-3, 8, 104) JTCX Same as JTC but with hex knob (not avail. 5-3, 8, 104) JTCZ Same as JTC but with prybar knob. Request availablity information. *Material: Nickel-plated brass - standard Example: MRE34SJTDBH8 Note: When ordering hoods, hardware and connectors separately for use with JTD Monojacks, connec- tors must be ordered as follows: Pin connector = MRE34P8, MRE42P8, etc. Socket connector = MRE34S8, MRE42S8, etc. The number “8” indicates special housing for use with the JTD Monojack hardware (available on sizes 34, 42, 50, 66, 75 and 104). ■ Step 1 Insert Series Code: MRE By adding “ML” to the series code, connector is supplied with diallyl phthalate type SDG-F and mil plated contacts. Example: MREML ■ Step 3 Contact Designation: P - Pin S - Socket When ordering molding less hardware to be used with mono-jacks, see note below. ■ Step 2 Number of Contacts: 7, 8, 9, 11, 14, 18, 20, 21, 26, 34, 41, 42, 50, 75, 104 *** MRE Series RP / 43 www.winconn.com

Current Rating: XMRA - 13 amps XMRE - 7.5 amps No. of Contacts: XMRA - 9, 14, 20, 34, 42, 50, 50-8, 66, 75, 104 XMRE - 9, 14, 18, 20, 26, 34, 42, 50, 75, 104 Pin Contacts: XMRA - .062 diameter, gold plated brass XMRE - .040 diameter, gold plated brass Socket Contacts: Phosphor bronze plated gold. Termination Types: XMRA - .070 dia. solder cup will accept up to #16 AWG stranded wire. XMRE - .048 dia. solder cup will accept up to #20 AWG stranded wire. Electrical Data: Both XMRE and XMRA meet high potential performance requirements of MIL-C-28748. Military versions are QPL’d to M28748/1 and M28748/2 (XMRA) and to M28748/5 and M28748/6 (XMRE) The minimum dielectric withstanding voltage is one minute electrification at 1000 VAC (sea level) for XMRA and 1200 VAC for XMRE Series. Dielectric: Brown mineral filled diallyl phthalate. Also available in gray glass filled diallyl phthalate, per MIL-M-14, SDG-F. Polarization: A polarizing stud in the plug shell and a mating slot in the receptacle shell eliminates misalignment. Jackscrews and jacksockets or guide pins and sockets are alternative methods of polarization. Hoods: Anodized Aluminum. May be applied to both plug and receptacles. Both top and side opening hoods are available. The XMRE and XMRA Series connectors are designed to provide a sturdy, space-saving, lightweight electrical connection. Inserts are housed in protective shells with screw lock coupling plus wall and cable mounting accessories available. A typical Series “XMRE” Receptacle and Plug fully wired and potted. XMRA & XMRE Series XMRA & XMRE Series External Miniature Rectangular / #16 Contacts / .062" Dia. 13 Amps & #20 Contacts / .040" Dia. / 7.5 Amps Specifications RP / 44 www.winconn.com

Plug: The complete connector half which has the plug shell as part of its assembly. Receptacle: The complete connector half which has the receptacle shell as part of its assembly. Shell: The metal housing in which a male or female insert is assembled. A shell is either a plug shell or a receptacle shell. Plug Shell: One which is designed to be inserted into a receptacle shell. Receptacle Shell: One which is designed to receive and enclose the plug shell upon engagement. Male Insert: The molded insulator body containing pin contacts. Femal Insert: The molded insulator body containing socket contacts. Pin Contacts: Male metal conductors that fit into the socket contacts. Socket Contacts: Female metal conductors, tubular in shape, which receive the pin contacts and retain them by spring tension. Polarization: A means of controlling the engagement of a plug and receptacle so that correct mating of the contacts is achieved. Potting Form: A plastic mold used to retain and shape the sealing compound during the moisture-proofing, or potting operation. Potting: A method of moisture-proofing the back of a plug or receptacle and the soldered wire connections by injecting a free flowing sealing compound into a pre-shaped form and allowing it to set. The result is a homoge- neous mass, chemically bonded to the back of the insert and around the soldered connections. Accessories: Those components such as hoods, mounting plates and finger grips which are attachable to a plug or receptacle to facilitate mounting and/or handling of the connector. XMRA & XMRE Series www.winconn.com Connector Assemblies Connector Terms

Dimensions are for reference only and are subject to change. Outline drawings on request. Contact Arrangements

9 Contacts 14 Contacts 18 Contacts 20 Contacts

XMRE 9 or XMRA9 XMRE 14 or XMRA 14 XMRE 18 XMRE 20 0r XMRA 20 .38 1.313 1.000 .09R .11 .44 .09R .09R.56 .06 .09R.44 .06

26 Contacts

.09R 1.625 1.312 .06 .75 .47 .23 2.000 1.688 .75 .47 .23 .09R .16 2.313 2.000 .09R.23 .47 .75 .09R.23 .47 .75 .88 .16 1.969 .25 1.125 .25 .31R .13 2.281 .16 1.234 .23 1.109 .44 1.250 .937 1.313 1.000 1.563 1.250 2.000 1.688 .16 2.719 2.594 2.281 1.531 .88 2.375 2.7501.969 .50 1.125 .50 2.281 2.719 2.594 2.282 .77 Views are rear (wiring end) of female inserts (male inserts are mirror image). The spacing, arrangement, and identification of contacts of the XMRE inserts are the same as found on the Series MRE Connectors for the same number of contacts. .172 Typ. .075 Typ. .075 Typ. .130 Typ. .13R .13R .13R .075 Typ. .130 Typ. .075 Typ. .130 Typ. .180 Typ. .075 Typ. .075 Typ. .075 Typ. .075 Typ. .075 Typ. .56 .13R .130 Typ. .180 Typ. .180 Typ. .180 Typ. Mounting holes for No. 4 machine screws Mounting holes for No. 4 machine screws Mounting holes for No. 4 machine screws Mounting holes for No. 4 machine screws

42 Contacts 50 Contacts

34 Contacts XMRA 34 34 Contacts XMRE 34 XMRE 42 or XMRA 42 XMRE 50 or XMRA 50

.180 Typ. .075 Typ.

104 Contacts

58 Contacts 66 Contacts XMRA 104

XMRA 50-8 XMRA 66 75 Contacts XMRE 75 or XMRA 75 XMRE 104 .150 Typ. .180 Typ.Mounting holes for No. 4 machine screws Mounting holes for No. 4 machine screws .16 .180 Typ. .225 .130 Typ. .075 Typ. .180 Typ..16R Mounting holes for No. 4 machine screws .260 XMRA & XMRE Series Outline RP / 46 www.winconn.com

Polarized jackscrews offer the ease and assurance of threaded positive coupling. They are particularly desirable for the larger connectors (XMRE 34 and larger) whenever they are to be used in locations that make it difficult to apply enough direct pull to separate the two halves of the connector. Type C (long-turning jackscrews and jacksockets) or Type D (monojacks) must be specified if both jackscrews and hood are required on the same connector half. Monojacks eliminate the need for roll pins, spacers and washers. Part Jackscrews Jacksockets Jackscrews Jacksockets Jackscrews Jacksockets Knobs (except Monojacks Monojackscrews Monojacksockets Wt. Oz. See Notes 1 & 2 0.30 0.45 0.15 Code Letter Turntable M Long Turntable C Fixed F Turning Turning D Material and Finish stainless steel with passivating dip stainless steel with passivating dip nickel-plated brass al. anodized nickel-plated brass Guide Socket Code Letter G K N Actual Size Photo G Type For General Use N Type For Extra Mechanical Strength K Type For High Electrical Conductivity Standard Guide Pin mates with all types FINISH Gold over Nickel MATERIALS "G" Socket: Phosphor bronze. "K" Socket: Beryllium copper. "N" Socket: Brass. Guide Pin: Brass Note 1: Weights are given for pairs, i.e., for a jackscrew and a jacksocket, etc., so that the weight figure may be added once to the weights of other accessories when computing the total weight of a plug or receptacle. Note 2: Weights of turnable jackscrews and turnable jacksockets include knobs and roll pins; weights of fixed hardware include nuts. Drawings show extension of knobs beyond shell (left) and beyond hood. Refer to details of shells and hoods for the other dimensions which vary according to connector size. Dimension A Dimension B SERIES CODE 9 14 18 20 26 34 42 50 50-8 66 75 104 XMRE CODE 34 42 50 66 75 104 0300 .59 .55 .55 – .53 – 0400 .59 .55 .55 – .53 – 6-32 UNC Except 104 Which is 8-32 UNC Jackscrew 4-40 UNC Except size 104 which is 6- Jacksocket .73 Hood Self locking pin Shell A Mono- Jackscrew Mono- Jacksocket .052 Dia. safety wire hole B Code designation: C-0300, C-0400 OR Mating connector half with Hood and turnable Monojacks Code designation: D-0300, D-0400 OR Mating connector half with Hood and turnable Long Jackscrews-with- Knobs AND Mating connector half with turnable Jackscrews-with-Knobs Code designation: M Connector with fixed Jackscrews Code designation: F XMRA & XMRE Series RP / 47 www.winconn.com Jackscrews & Jacksockets Outline Dimensions

Dimensions are for reference only and are subject to change. Outline drawings on request. Jackscrew Locking For Series XMRE, XMRA Size 0300 0400 0300X 0400X 0700 0800 Dimension A - Type CW 66 – – – – .47 .47 Size 0300 0400 0300X 0400X 0700 0800 Dimension A - Type CU 66 – – – – .72 .72 Size 0300 0400 0300X 0400X 0700 0800 Dimension A - Type CX 66 – – – – .61 .61 Size 0300 0400 0300X 0400X 0700 0800 Dimension A - Type CZ 66 – – – – .72 .72 All jackscrews and sockets are stainless steel, passivated, except F & D which are nickel-plated brass. .19 .078 Int. Hex CW .22 A A A A CU CX .25 Hex. CZ .22 Dia. .50 .97 FZMX MUMW .22 Dia. .25 Hex 6-32 UNC 2 THD. (Typ) .23 .73 .33 .078 Int. Hex .19 All knobs are aluminum, anodized except MW and CW which are stainless steel, passivated. XMRA & XMRE Series Outline Jackscrews & Jacksockets Dimensions RP / 48 www.winconn.com

HOODS - DRAWN ALUMINUM Dimensions are for reference only and are subject to change. Outline drawings on request. Hood Dimensions Part Number A B C D E H G For use with Type D Jacksockets & Jackscrews For use with Type C Jacksockets & Jackscrews For use with Type D Jacksockets & Jackscrews For use with Type C Jacksockets & Jackscrews For use with G, K, or N, Type Guides or Type F Jackscrews Hood Dimensions Part Number A B C D E G Side Cable Opening Top Cable OpeningFor use with G, K, or N, Type Guides * For use with Type C Jacksockets & Jackscrews Cable OpeningDimensionsFor use with Monojacks Hood Part No. (If ordered separately) AB CD E Dia. F Dia. Wt. Oz. For use with G, K, or N, Type Guides * For use with Type C Jacksockets & Jackscrews Cable OpeningDimensionsFor use with Monojacks Hood Part No. (If ordered separately) A BC D E Dia. F Dia. Wt. Oz. * Add “J” to hood P/N when used with “F” jackscrews. Top Cable Opening Side Cable Opening D C.08 A .08 Style “Z” G Style “Y” E (cable opening) .1935 Dia. 2 Holes (.228 Dia. For XMRA 104-0700 Only) .191 Dia. 2 Holes (.228 Dia. For XMRA 104-0800 Only) H G B A C D .08 E (cable opening) E & F (cable opening) 0300X & 0500X Style Cable Clamp A C D F E Drilled for long jackscrews and jacksockets (type C) in Hood style 0300 only B A C B E DF E & F (cable opening) 0400X & 0600X Style Cable Clamp B For use with G, K, or N, Type Guides or Type F Jackscrews XMRA & XMRE Series RP / 49 www.winconn.com Outline Hoods- Drawn Aluminum Dimensions Hoods- Formed Aluminum

Dimensions Wt. A B C D E F G Oz. XMRE 34-2*000 XMRE 42-2*000 XMRE 50-2*000 XMRA 66-2*000 XMRA 66-4*000 XMRA 50-8-2*000 XMRE 75-2*000 XMRA 104-2*000 Shell Part No. (if ordered separately) Important Note When Ordering Plug and Receptacle Shells The shell part numbers given in table show an asterisk (*) where the code letter for the desired polarizing position belongs - example: XMRE9- 2*000 becomes XMRE9-2B000 when polarization in position “B” is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XMRE9-2000. Dimensions are for reference only and are subject to change. Outline drawings on request. TYPICAL SHELLS FOR MONOJACKS Shells are aluminum, anodized for protection against corrosion. Either shell style - plug or receptacle - may be used to house the female insert, thus allowing the “live” socket contacts to be cable or panel mounted, as desired. Shells also provide a means by which connector polarization is accomplished - the receptacle shell is slotted for engaging a polarizing pin on the plug shell. Any of seven positions (A, B, C, D, E, F, or G) may be specified for polarization; non-polarized shells have the slot and pin omitted. Stainless steel shells available for 66 and 104 sizes. Dimensions vary from those shown for aluminum shells, Check Sales for availability and dimensions on all sizes. For Connector Size A B C 34, 42, 50, 50-8, 66, 75 .11 .120 .06R 104 .14 .150 .07R Shells are .040 in. thick. .06R .03R .06R Mtg Hole Style 9 F A A E B F C G D .28 .156 Typ .312 Typ Polarizing Slot B C E D .06R .120 Dia. .14R E D B .06R .114 G .14R .120 Dia.C B C E D .384R .06R .120 Dia. .500 .140 Dia. .114 .06R .383 .117 .120 Dia. .20R B C E D .06R G .875 .150 Dia. B C .421R For All Conf. For 9 to 26 For 66 and 50-8For 34, 42, and .766 For 75 For 104 For 34, 42, 50, 50-8, 66 and 104 Configuration For 75 Configuration Receptacle Shell Style Number 2000 B Dia. B Dia. XMRA & XMRE Series Outline Shells - Receptacle Dimensions Shells - Receptacle RP / 50 www.winconn.com

Dimensions are for reference only and are subject to change. Outline drawings on request. Shell Part No. (if ordered separately) Typical Shells For Monojacks For Connector Size A B C 34, 42, 50, 50-8, 66, 75 .11 .120 .06R 104 .14 .150 .07R Dimensions Wt. A B C D E F G Oz. XMRE 34-1*000 XMRE 42-1*000 XMRE 50-1*000 XMRA 66-1*000 XMRA 50-8-1*000 XMRA 50-8-3*000 XMRE 75-1*000 XMRA 104-1*000 Plug Shell Style Number 1000 For 75 Configuration A4 Slots 2 Slots A C Type B Dia. B Dia. For 34, 42, 50, 50-8, 66 and 104 Configuration Shells are .040 in. thick. For All Config.For 9 to 26For 34, 42, and 50For 66 and 50-8For 75For 104 .06R B C D E .150 Dia. G .875 .421R D E .06R .120 Dia. .117 .383 .766 .20R B C .140 Dia. 4 Holes B C D E .06R .120 Dia. 6 Holes .372RG .500 B C .120 Dia. .14R D E .06R G .468 .120 Dia. .120 Dia. 2 Holes.14R .06R D E B C .06R .06R .03R Mtg. Hole Style 9 F .508 .156 Typ. .312 Typ. Polarizing Pin A E B F C G D A XMRA & XMRE Series RP / 51 www.winconn.com Outline Shells - Plug Dimensions

Mounting Plates for External Miniature Rectangular Connectors, Potting Forms Potting Form Part No. (If Ordered Separately) Dimensions AB XMRE 9-0100 .38 .86 XMRE 14-0100 .45 .81 XMRE 18-0100 .56 .86 XMRE 20-0100 .44 1.11 XMRE 26-0100 .56 1.17 XMRE 34-0100 .75 1.39 XMRE 42-0100 .75 1.69 XMRE 50-0100 .75 1.98 XMRE 75-0100 1.11 1.98 Potting Form Part No. (If Ordered Separately) Dimensions AB XMRA 9-0100 .38 .86 XMRA 14-0100 .45 1.11 * XMRA 20-0100 .44 1.11 XMRA 34-0100 .75 1.39 XMRA 42-0100 .75 1.69 XMRA 50-0100 .75 2.03 XMRA 50-8-0100 1.13 1.72 XMRA 66-0100 1.13 1.72 XMRA 75-0100 1.11 2.03 XMRA 104-0100 1.48 2.08 Potting Forms for External Miniature Rectangular Connectors Nylon Potting Forms: Each form matches the back opening contour of its appropriate shell. Stays easily in place during the potting operation. Of negligible weight, the form need not be removed from the connector after potting. XMRE and XMRA connector-halves should always be engaged during the potting operation to preserve the contact alignment. Dimensions Wt. A BCD EFG O z . XMRA 66-0010 Mounting Plate Part No. (If Ordered Separately) Panel Cutout Mounting Plates enable attachment of a connector to a wall, bulkhead, or other supporting surface. The plate is assembled to the back of a plug or receptacle by employing the same hardware and/or guides used to retain the insert in the shell; No. 4 machine screws are then used to mount the complete assembly against the required surface. Mounting plates are aluminum, anodized to resist corrosion. *Stepped construction not shown or dimensioned. Cut-outs to clear XMRA barriers not shown. Dimensions are for reference only and are subject to change. Outline drawings on request. AA BB .50 .025 Typ. Wall Thick Potting form plan view for 34, 42, 50, 50-8, 66, and 104 contacts Potting form plan view for 9 to 26 contacts A B EF C G D .06R .125 Dia. .16R Mounting plate plan view for 9 to 26 contacts .040 Stock .150 Dia. (104)

10 Holes

F H D B C G A .06R E Panel Cut Out .050 StockMounting Plate Plan View for 50-8, 66 & 104 Contacts Note: .19R for 104 and .16R for 50-8 & 66 for panel cutout. H Dimension 50-8 = .250 66 = .250 104 = .437 A B C D .125 Dia.

12 Holes

E.117 .383 Panel Cut Out .040 Stock G Left half shows holes for 34, 42, 50 contacts; right half for 75 contacts only. Each plate is symmetrical about the indicated center line. .06R .16R .23 .125 Dia. F XMRA & XMRE Series Outline Mounting Plates Dimensions Outline Potting Forms Dimensions RP / 52 www.winconn.com

G- Cylindrical guide with single spring member. Recommended for ground only. K- Cylindrical guide with four spring members. May be used for electrical contact. N- Cylindrical guide without spring member. Recommended for extra mechanical strength. Jackscrews and Jacksockets *M- Polarized short turnable jackscrew and jacksocket. Cannot be used with hoods. *C- Polarized long turnable jackscrew and jacksocket for use with hoods. *D- Polarized turnable jackscrew and jacksocket for use with hoods for sizes 34 thru 104 excluding 41. *F- Polarized fixed jackscrew and jacksocket. *J- Non-polarized short turnable jackscrews. Cannot be used with hoods. *L- Non-polarized long turnable jackscrews. *R- Non-polarized fixed jacksocket. *FZ- Same as F but with 6-32 mtg thd (std on 104). *MW-Same as M but with knurled round knob with internal hex (not avail. 104). *MU- Same as M but with knurled round knob with screwdriver slot (not avail. 104). *MX- Same as M but with hex knob (not avail 104). *CW- Same as C but with knurled round knob with internal hex (not avail. 104). *CU- Same as C but with knurled round knob with screwdriver slot (not avail. 104). *CX- Same as C but with hex knob (not avail. 104). *CZ- Same as C but with prybar knob (not avail. 104). * Request availablity information. * Material: Nickel-plated brass - standard Potting Form or Hoods: 0- When no potting form or hood is required. 1- Potting form style #0100. Cannot be used with hood. Request availability information. Cannot be used Formed Hoods: 3- Hood, top opening, style #0300, for use with Type “C” or “D” jackscrews. 4- Hood, side opening, style #0400, for use with Type “C” or “D” jackscrews. 5- Hood, top opening, style #0500, for use with “G”, “K”, or “N” type guides only and “F” style jackscrews. 6- Hood, side opening, style #0600, for use with “G”, “K”, or “N” type guides only and “F” style jackscrews. Deep Drawn Hoods: 7- Hood, top opening, style #0700, for use with Type “C” or “D” jackscrews. 8- Hood, side opening, style #0800, for use with Type “C” or “D” jackscrews. 9- Hood, top opening, style #0900, for use with “G”, “K”, and “N” type guides or “F” jackscrews. 2- Hood, side opening, style #0200, for use with “G”, “K”, or “N” type guides or “F” jackscrews. Note: Addition of “X” to end of code # indicates cable opening larger than std. See hoods for cable opening size. Example: XMRE34PD3A300X ■ Step 2 Pin or Socket Contacts: P - Pin S - Socket ■ Step 3 Type of Contact: Blank = Standard Solder Cup Straight Dip Solder .030" dia.= XMRA .025" dia.= XMRE D3 = .094" D4 = .125" D5 = .156" For additional lengths in 1/32" increments, contact Winchester’s Sales Department. ■ Step 4 ■ Step 4 Guides Jackscrews and Jacksockets (See bottom chart) ■ Step 6 Polarization Position: A, B, C, D, E, F or G. Omit letter when polarization is not required. ■ Step 7 (See bottom chart) ■ Step 7 ■ Step 9 Special Gaskets: Omit letter when gaskets are not required. G- Bulkhead gasket, style #0000G. Use only when mounting plate is specified. F- Face gasket, style #0000F. Use with male insert only. B- If both gasket #0000G and gasket #0000F are desired. Check plant for availability on all gaskets. ■ Step 8 Mounting Plate or Finger Grips: 00- When no mounting plate is required *10- Mounting plate, style #0010. *Mounting plates are not used with or “L” jackscrews. ■ Step 5 Shell Type: 0 No shell.

1 Plug shell, style

*000.

2 Receptacle shell,

style 2*000.

3 Plug shell,

monojack type, style 3*000.

4 Receptacle,

monojack type, style 4 *000. ** 7 Stainless Steel Plug shell, style *000 (66 & 104 only) ** 8 Stainless Steel Receptacle shell, style 8 *000 (66 & 104 only) * Polarizing Position ** Request availablity information. ■ Step 1 Insert Code No. of Contacts: XMRA 9, 14, 20, 34, 42, 50, 50-8, 66, 75, 104 XMRE 9, 14, 18, 20, 26, 34, 42, 50, 75, 104 By adding “ML” to the series code, connector is supplied with diallyl phthalate type SDG-F and mil plated contacts. Example: XMREML XMRAML XMRA & XMRE Series RP / 53 www.winconn.com

.030 Diameter Contacts — 5 Amps SLE .025 Diameter Contacts — 3 Amps. SME .040 Diameter Contacts — 7.5 Amps Current Rating: SLE - 3 amps: SRE - 5 amps; SME - 7.5 amps. No. of Contacts: 4, 5, 7, 9, 11, 14, 20, 26, 29, 34, 44, 50. Pin Contacts: Brass, gold plated except for SLE which is phosphor bronze, gold plated. Socke t Contacts: Phosphor bronze, gold plated. Termination Types: .037 diameter solder cup will accept up to #22 AWG stranded wire. Solder cup adaptor (Part No. S45) will accept up to #20 AWG stranded wire. Dip solder terminations available for SRE Series, .030 Dia. Check Sales Department for available lengths. Military versions of SRE are QPL’d to M28748/7 and M28748/8. Electrical Data: The dielectric withstanding voltage is one minute electrification at 1000 VAC. Dielectric: Green glass-filled diallyl phthalate per MIL-M-14, SDG-F. Guides: Type NSS stainless steel, passivated or Type N Brass, gold plated. Jackscrews: Stainless steel, passivated. Aluminum knobs on the jackscrews are equipped with set screws, except JTU jackscrews which have stainless steel knobs equipped with groove pins. Hoods: Anodized aluminum. May be applied to either plug or receptacle. Both top and side openings are available for use with either guides or jackscrews. suited for aircraft, instrumentation and portable equipment applications. Right angle, dip solder, pin or socket contacts are available. Consult factory. Within this series, you’ll find a standard size connector for which you can select one of three current ratings: 3, 5 or 7.5 amps. Compact and lightweight, they are especially SLE-SME-SRE Series Sub Miniature / High Density Rectangular / .025" Dia. / 3 Amps .030" Dia. / 5 Amps / .040" Dia. / 7.5 Amps Specifications RP / 54 www.winconn.com

Mating Face of Female Moldings - Male Moldings Reverse Image Dimensions are for reference only and are subject to change. Outline drawings on request. SLE-SME-SRE Series RP / 55 www.winconn.com Contact Arrangement

Dimensions are for reference only and are subject to change. Outline drawings on request. C AB D F E Dia. .24 G2-56 UNC-2A THD. Slot — .031 Wide Slot — .020 Wide .24 H N Dia. .037 Dia. Solder Cup .16 K Dia. J F .22 Typ. M L THD. 2-56 UNC-2A .46 Typ. .11 L THD. M .16 N Dia. .037 Dia. Solder Cup .11 .81 Typ. N Dia. .11 .16 .47 Typ. M L THD. L THD. M .16 N Dia. .11 .032 Dia. Hole

1.57 Except Size 44 & 50

Which is 2.34 J Jackscrews JT Jackscrews JTU Jackscrews JTC Jackscrews The stainless steel guide pin and socket have good physical strength and are particularly desirable for mounting connectors which will be subject to severe vibration in service, but not for electrical applications. Optional gold plated brass available for electrical applications. No. of Contacts Series D E F G H J K L Thd M N Dia *2-56 UNC Thread also available. See ordering information for part number suffix. AB C 4 .78 .562 .21 5 .70 .482 .21 7 .78 .562 .21 9 .88 .656 .21 11 .78 .531 .28 14 .88 .625 .28 20 1.06 .814 .28 26 1.25 1.000 .28 29 1.34 1.094 .28 34 1.25 1.032 .39 44 1.48 1.267 .39 50 1.63 1.408 .39 SLE-SME-SRE Series Outline Dimensions RP / 56 www.winconn.com

No. of Con- acts ■ Step 1 Insert Code Series: SLE- .025 Dia. Contact SME- .040 Dia. Contact SRE- .030 Dia. Contact ■ Step 2 Number of Contacts: ■ Step 3 Contact Designation: P- Pin S- Socket ■ Step 7 For Special 2-56 thds add -859 suffix on Series SRE part numbers ■ Step 5 Jackscrew Locks: J- Polarized Fixed Screw & Socket JT- Polarized Short Turning Screw & Socket JTC- Polarized Long Turning Screw & Socket JTU- Polarized Short Turning Screw & Socket with Round Knob Guides: NSS-Stainless Steel Cylindrical Polarized Guides N- Gold Plated Brass Polarized Guides ■ Step 6 Mounting: H8- Large Top Opening H13- Large Top Opening (High) H9- Large Side Opening *When ordering hoods separately use Catalog Number in Chart ■ Step 4 Special Contacts: This step to be used only when a special material, finish, or style is required. Omit when standard contacts are used. Consult sales department for proper designation. Order Solder Cup Adapter for #20 AWG Stranded wire. Use Part No. S45. Must be ordered separately. NOT AVAILABLE NOT AVAILABLE Cable Opening Dimensions are for reference only and are subject to change. Outline drawings on request. Style H9 — Side Cable Opening Style H8 / H13— Top Cable Opening H D G C B .22 E x F Cable Opening D C F E H A B .22 * Add “J” to hood part number when used with fixed jackscrews Add “JTC” to hood part number when used with long turning jackscrews. Hood Catalog Number Guides Only* Hood Style Dimensions

34 S JTC H13SRE

www.winconn.com Outline Dimensions Ordering Infomation

The SREC series is the first family of subminiature crimp contact rack and panel connectors. While retaining all of the important features of true connector miniatur- ization, the SREC offers .030 diameter crimp (4 indents) type removable contacts with .094 center to center spacing. Contacts are precision machined to assure solid pin and socket reliability. Compact and light in weight, the SREC Series is especially suitable for aircraft, instrumentation, computer and portable equipment applications. Current Rating: 5 amps No. of Contacts: 7, 44, 50 Pin Contacts: .030 dia. 4 indent crimp. Leaded commercial bronze, gold plated. Socket Contacts: Phosphor bronze, gold plated. Termination Types: Crimp or .025 sq. wire wrap. Crimp contacts will accom- modate #20-#28 AWG stranded wire. Dielectric: Glass-filled diallyl phthalate per MIL-M-14, SDG-F. Electrical Data: The dielectric withstanding voltage is one minute electrification at 1400 VAC. Jackscrews: Long and short turning, passivated stainless steel. Anodized aluminum knurled knobs equipped with set screws for long turning jackscrews. Stainless steel knobs with groove pins for short turning jackscrews. Guides: Type N is standard - brass for extra mechanical strength. Type K - beryllium copper for high electrical conductivity. Type NSS - stainless steel Hoods: Top opening hoods are available in all sizes. Side opening available for SREC 50 only. SREC Series Sub Miniature Rectangular, Removable Contacts Specifications RP / 58 www.winconn.com

SREC 7 SREC 14 SREC 20 SREC 26 SREC 34 SREC 50 Component Parts Guide Pin Guide Socket L Washer (2) Nut (2) Weight in Ounces .02 .02 .007 .01 Weight in Ounces (w/o contacts) DIMENSION CHART No. of Contacts A B C G H SREC 11, 18 and 44 outline drawings on request Part No. Contact Wire Size Dimensions Current Type (Stranded) ABCD Rating 100-4024P P (Male) 24-26-28 — .56 .028 .055 100-4020S S (Female) 20-22 .48 — .046 — Polarizing Pin: Brass, Gold Plated, Part No. 109-8565 Dimensions are for reference only and are subject to change. Outline drawings on request. A .582-56 UNC 2A THD. .22 C B H .61 .23 .58 .13 .23 .44 3-48 UNC — 2A THD. .032 Dia. Hole G A CB .22 .58 .61 .23 2-56 UNC 2A THD. Slot .031 Wide Slot .020 Wide .44 .23.13 .58 .22 H SREC-JTCH13SREC-PJTSREC-SJ SREC-PN/KSREC-SN/K .047 Typ. .090 Typ. .081 Typ. .047 Typ. SREC Series RP / 59 www.winconn.com Outline Dimensions Physical Data Contacts

■ Step 5 (See bottom chart) 34SREC S JTC H13 859 ■ Step 4 Contact Wire Size. Omit this step if contacts are to be ordered separately. Use only when contacts are supplied with connector Add: 20 - for 20-22 AWG 24 - for 24-26 AWG 28 - for 28-30 AWG ■ Step 6 Hood Type: H8 - Large Top Opening (50 size only) H9 - Large Side Opening (50 size only) H13 -Higher Top Opening (all others) See Hood Section For Availability ■ Step 1 Insert Series Code: SREC ■ Step 2 Number of Contacts: 7, 11, 14, 18, 20, 26, 34, 44, 50 ■ Step 3 Contact Designation: P - Pin Molding S - Socket Molding ■ Step 7 For 2-56 UNC 2A Threads on Jackscrews, add suffix -859. Omit if not required. ■ Step 5 Guides K- Beryllium Copper Cylindrical Guides N- Brass Cylindrical Guides (Standard) NSS- Same style as above but Stainless Steel Jackscrew Locks J- Polarized Fixed Jackscrew and Jacksocket JT- Polarized Short Turning Jackscrew and Jacksocket JTC- Polarized Long Turning Jackscrew and Jacksocket Omit steps not required CableCode Dimensions Opening Fits No.* Connector ABCDEFH SREC 7 P/S SREC 14 P/S SREC 20 P/S SREC 26 P/S SREC 34 P/S SREC 50 P/S SRE/SREC Large Top Opening Hoods Code Fits No.* A B C D E H Connector SREC 50 P/S SRE/SREC Large Side Opening Hoods Dimensions are for reference only and are subject to change. Outline drawings on request. * Code numbers shown are for use with guides. For use with jackscrews, add J or JTC to hood part number. A F D H E .22 C B H A D B C .22 E Cable Opening SREC Series Outline Formed Aluminum Hoods Dimentions RP / 60 www.winconn.com

Dip Solder: .125" or .156" standard lengths with other lengths available on special order. Grid Spacing: .100" x .100" grid 50 or 74 contact positions on .100" centers in 3 rows. Two outboard rows for 25 contacts each. Center row either for 24 additional contacts or polarizing pins in specified positions. Solder Cup: Accommodates up to #22 AWG stranded wire. Crimp Removable: Crimp contacts available for #20 through #30 AWG stranded wire. Designed for four indent crimp. See crimp tooling. Available in 50 contact configuration only. Choice of any combination of 24, center positions. Specify polarizing positions required. Positions top to bottom are: A, B, C, D, E, F, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y, Z, a.b. When 74 contacts are required no polarization other than hardware polarization is available. Current Rating: 5.0 amps. Pin Contacts: .030" dia. gold plated brass conforming to specification QQ-B-626. Socket Contacts: Gold plated phosphor bronze. Termination Types: Solder cup, dip solder and crimp removable contacts. Housing Material: Red diallyl phthalate for Dip Solder and Solder Cup Housings. Green diallyl phthalate for Crimp Remov- able Housings Dielectric: Minimum withstanding voltage is one minute electrification at 1200 VAC. Polarization: Polarizing pins may be used in any combination in center row. Jackscrews: Passivated stainless steel, anodized aluminum knobs. Hoods: Anodized aluminum, top opening only. Automatic Crimping Machine: Cat. No. 107-0952. Hand Crimping Tool: Cat. No. 107-0616. Locator: Cat. No. 107-0617. Contact Removal Tool: Cat. No. 107-1012. Contact Insertion Tool: Cat. No. 107-1011.

42 Series

Panel Mount Miniature 22 AWG - .030" Diameter - 5 Amps RP / 61 www.winconn.com Termination Types Polarization Specifications Crimp Tooling

Dimensions are for reference only and are subject to change. Outline drawings on request. ■ Step 5 Polarization Positions: Blank = Non-Polarized Polarization available in 50 contact configuration only. Choice of any combination of 24 center positions. Specify polarizing positions required. Positions top to bottom are: A, B, C, D, E, F, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y, Z, a, b. When 74 contacts are required no polarization other than hardware polarization is available. ■ Step 3 No. of Contacts: 50 or 74 ■ Step 4 Contact Type: S = Socket P = Pin ■ Step 1 Series Code: Series 42 ■ Step 2 Hardware and Accessories: (See bottom chart) SOLDER CUP PLUG (Clipped-in Contacts) 34 = Molding, No Hardware 35 = Molding, With Guides 36 = Molding, With Fixed Jackscrews 52 = Molding, With Short-Turning Jackscrews 53 = Molding, With Long-Turning Jackscrews 54 = Molding, With Guides and Hood 55 = Molding, With Long-Turning Jackscrews 55 = and Hood SOLDER CUP RECEPTACLE (Clipped-in Contacts) 40 = Molding, No Hardware 41 = Molding, With Guides 42 = Molding, With Short-Turning Jackscrews, 42 = No Hood 43 = Molding, With Long-Turning Jackscrews, 42 = No Hood 44 = Molding, With Guides and Hoods 45 = Molding, With Long-Turning Jackscrews 42 = and Hood 46 = Molding, With Fixed Jackscrews 5 0/7 4 P/S42 36 Solder Cup, Clipped-in Contacts .100 Typ. .06 R .38 2.802 3.125 Solder Cup .035 Dia. Typ. .100 (Typ.) .31.23 .69 6-32 UNC 2-A THD. Typ. 1.563 .38 x 1.41 Cable Opening .030 Dia. Typ. 1.469 .23 .69 .17 4-40 UNC 2-A THD. Typ RP / 62 www.winconn.com

.375 2.802 4-40 UNC 2-A THD. Typ .156 .100 Typ. 3.125 .234 .688 Typ. .030 .313 .205 .550 .450 .350 Dip Solder, Molded-in Contacts Dimensions are for reference only and are subject to change. Outline drawings on request. Dip Solder Receptacle Shown: 74 contact right angle configuration. Center row eliminated for 50 contact connector. ■ Step 5 Polarization Positions: Blank = Non-Polarized Polarization available in 50 contact configuration only. Choice of any combination of 24 center positions. Specify polarizing positions required. Positions top to bottom are: A, B, C, D, E, F, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y, Z, a, b. When 74 contacts are required no polarization other than hardware polarization is available. ■ Step 3 No. of Contacts: 50 or 74 ■ Step 4 Contact Type: P = Pin ■ Step 1 Series Code: Series 42 ■ Step 2 Hardware and Accessories: DIP SOLDER (Molded-in Contacts) 30 = No Hardware 31 = Guide Pin and Socket 32 = Fixed Jackscrew and Jacksocket ■ Step 6 Termination Type: 4 = Dip Solder Contacts...125" 5 = Dip Solder Contacts...156" 852 = Right Angle Dip Solder Contacts .205"

74 P42 4 -30

www.winconn.com Outline

.37 .18 .200 .050 2.800 3.13 .100 Typ. .100 .200 .15 2.50 .69 .32 #6-32 UNC-2A #6-32 UNC-2B 1.54 ■ Step 1 Series Code: Series 42 ■ Step 2 1 = Crimp Connector Molding ■ Step 3 Hardware and Accessories: (See bottom chart) ■ Step 4 No. of Contacts: 50 or 74 ■ Step 6 Polarization Positions: Blank = Non-Polarized Polarization available in 50 contact configuration only. Choice of any combination of 24 center positions. Specify polarizing positions required. Positions top to bottom are: A, B, C, D, E, F, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y, Z, a, b. When 74 contacts are required no polarization other than hardware polarization is available. ■ Step 5 Contact Type: S = Socket P = Pin Crimp removable contacts are ordered separately. Pin Contacts: 100-4020P 100-4024P 100-4028P Socket Contacts: 100-4020S 100-4024S 100-4028S Socket Contacts (Closed Entry): 100-54020S 100-54024S 100-54028S See 100 Series Contact Section of Rack & Panel Crimp Removable Pin Contacts 34 = Molding, No Hardware 35 = Molding, With Guides 36 = Molding, With Fixed Jackscrews 52 = Molding, With Short-Turning Jackscrews 53 = Molding, With Long-Turning Jackscrews 54 = Molding, With Guides and Hood 55 = Molding, With Long-Turning Jackscrews 55 = and Hood Crimp Removable Socket Contacts 40 = Molding, No Hardware 41 = Molding, With Guides 42 = Molding, With Short-Turning Jackscrews, 42 = No Hood 43 = Molding, With Long-Turning Jackscrews, 42 = No Hood 44 = Molding, With Guides and Hoods 45 = Molding, With Long-Turning Jackscrews 42 = and Hood 46 = Molding, With Fixed Jackscrews

42 P 501 36

RP / 64 www.winconn.com

SRM Series connectors are particularly suitable where current rating and voltage drop require- ments dictate a larger wire size than can be used with other subminiature connectors. Current Rating: 7.5 Amps No. of Contacts: 5, 75, 104 Pin Contacts: .040 dia. brass, gold plated. Socket Contacts: Phosphor, bronze, gold plated. Termination Types: .048 dia. solder cups will accept up to #20 AWG stranded wire. Dip Solder Contacts, .030 dia. Check Sales Dept. for available lengths. Electrical Data: Minimum dielectric withstand- ing voltage is one minute at

1500 VAC when tested in

accordance with MIL-C-28748. Dielectric: Glass-filled diallyl phthalate - grey- per MIL-M-14, SDG-F. Guides: NSS Type, stainless steel; or N Type, brass. Jackscrews: Stainless steel with knurled and slotted aluminum knobs. Hoods: Anodized aluminum. May be applied to either plug or receptacle. Both top and side openings are available. Shells: Polarized shells are available. SRM connector assembled with a shell changes part number from SRM _ _ _ _ _ to XSRM14PNSS1000XSRM14PNSS2500 SRM14SNSS0000 XSRM26SM2000SRM26SCO300 SRM26PF0000 SRM Series Sub Miniature Rectangular #20 Contacts / .040" Dia. / 7.5 Amps RP / 65 www.winconn.com Specifications

SRM5P-NSS SRM7S-NSS SRM7P-NSS SRM11P-NSS .23 .06R .531 .780 .125 .48 .20 SLOT .025 WIDE .133 .040 DIA. 2-56 UNC - 2A THD. .55 .22 .22 .48 .55 .20 .23 .06R .870 .123 .625 .870 .123 .625 .09R.34 .34 .750 1.000 .125 1.000 1.25 .125 .34 .09R .34 .125 .343 .172 .125 .09R.50 .09R.50 2.06 .125 .343 .172 .133 .040 DIA. .36 2-56 UNC. 2A THD. .67 .61 .36 SLOT .025 WIDE .19 .61 .19 .67 .172 .125 1.812 2.06 .09R .72 .562 .218 .19 .61 .19 .67 SLOT .025 WIDE .133 .040 Dia. .36 .67 .61 .36 .09R.94 2.38 2.062 .159 .312 .625 6-32 UNC. 2A THD. 1.812 1.56 1.3121.250 1.50 .063 Typ. .108 Typ. .063 Typ..048 Dia. Solder Cup .108 Typ. .063 Typ. .108 Typ. .063 Typ. SRM14P-NSS SRM20P-NSS SRM26S-NSS SRM34P-NSS SRM50P-NSS Mounting holes for No. 2 machine screws (Typ.) .108 Typ. .108 Typ. .063 Typ. .063 Typ. .063 Typ. .09R .09R .063 Typ. .063 Typ..048 Dia. Solder Cup .048 Dia. Solder Cup .063 Typ. .108 Typ.2-56 UNC.- 2A THD. SRM75S-NSS SRM75P-NSS SRM104S-NSS SRM104P-NSS *Center guides are .038 x .062 .108 Typ. Dimensions are for reference only and are subject to change. Outline drawings on request. Mounting holes for No. 2 machine screws (Typ.) SRM Series RP / 66 www.winconn.com Contact Arrangements

Mating connector half with Hood and turnable Long Jackscrews-with-Knobs Code designation C-0300, C-0400 Connector with fixed Jack- screws Code designation F AND Mating connector half with turnable Jackscrews-with-Knobs Code designation M Jackscrew locking device assures positive coupling of engaged connectors to prevent accidental disconnecting from vibration or physical shock. It also aids easy connection and separation of connector plug and receptacle. Mounted connector-half houses one non-turnable fixed jackscrew and jacksocket to insure connector polarization. Mating-half houses one of the two types of turning jackscrew and jacksocket (M or C) Turnable jackscrew-jacksocket combination (M or C) assembles on either Plug or Receptacle, the mating connector-half (either Receptacle or Plug) must then contain fixed jackscrew-jacksocket combination (F). Both short and long turning jackscrews (M and C) have knurled and slotted knobs for locking by hand or screwdriver. Knob is assembled on shaft with a socket setscrew. Safety wiring of engaged halves is achieved by using the through-holes. Drawings show extension of standard knobs beyond hood. Standard Connec- tor Size Short Fixed Turning Jacks 0300 0300X Code “M” Code “F” AB E F SRM 5 – – .92 .53 SRM 7 – 1.28 .92 .53 SRM 11 – 1.84 .92 .53 SRM 14 – 1.84 .92 .53 SRM 20 – 2.09 .92 .53 SRM 26 .56 2.09 .92 .53 SRM 34 .56 2.09 .92 .53 SRM 50 .56 2.09 .92 .53 SRM 75 .56 2.23 1.06 .67 SRM 104 .56 2.80 1.06 .67 Note: Jackscrews and jacksockets are stainless steel with passivating dip. Knob is anodized aluminum. Dimensions are for reference only and are subject to change. Outline drawings on request. Mating thread size 2-56 UNC except size 104 which is 6-32 UNC. JacksocketSolder Cups F Jacksocket Solder Cups E .58 B Set ScrewHood.11 A.13 Long Turning Code “C” TYPE Code Letter Jackscrew Jacksocket Fixed F Jackscrew Short Jacksocket Turnable M Jackscrew Long Jacksocket Turnable C Knob Standard — SRM Series RP / 67 www.winconn.com OUTLINE JACKSCREWS & JACKSOCKETS Dimensions Codes

Side Cable Opening HoodsTop Cable Opening HoodsDimensions are for reference only and are subject to change. Outline drawings on request. Side Cable Opening Hoods Dimensions A* B C D E F G Code No. Cable Opening Dimensions A* B C D E F G Code No. Cable Opening Dimensions A* B C D E F G Code No. Cable Opening Code No. Cable Opening Top Cable Opening Hoods 0400X Cable Clamp 0400X Hood is identical to 0400 Hood except for cable clamp style and cable opening in the hood. 0300X Cable Clamp 0300X Hood is identical to 0300 Hood except for cable clamp style and cable opening in the hood. Note: This dimension does not apply when shells are used. Tab is removed. Request availability information. Hoods may be ordered separately (see code numbers in above tables) or assembled on connectors. If desired assembled to connectors, see Code Numbering System for complete catalog number. Prefix hood code numbers with “X” for use with shells. Example: XSRM34-0300 D F EG (0300 Only)F & G (Cable Opening) C 2-26 UNC-2A THD. (0500 Only) B A F & G (Cable Opening) E G B A F (0400 Only) D 2-56 UNC-2A THD. (0600 Only) C Dimensions A* B C D E F G SRM Series RP / 68 www.winconn.com Hoods- Formed Aluminum Dimensions

Dimensions are for reference only and are subject to change. Outline drawings on request. For Use With XSRM Connectors Dimensions AB CDEFG H Dimensions ABCDEFG H Receptacle Shells ( .031" thick)Plug Shells ( .031" thick) Shell Part No. (if ordered separately) Shell Part No. (if ordered separately) The shell part numbers given in table show an asterisk (*) where the code letter for the desired polarizing position belongs - example: XSRM14-2*000 becomes XSRM14-2B000 when polarization in position “B” is desired. Specify the same position on the mating shell. For non-polarized shells, merely omit this position, e.g. XSRM14-2000. Shell Size Available Polarization Positions

7 A,B,C,D

11 A,B,C,D

14 A,B,C,D,E

20 A,B,C,D,E,F,G

26 A,B,C,D,E,F,G

Shell Size Available Polarization Positions

34 A,B,C,D,E,F,G

50 A,B,C,D,E,F,G

75 A,B,C,D,E,F,G

104 A,B,C,D,E,F,G

Dimensions are for reference only and are subject to change. Outline drawings on request. For Use With XSRM Connectors For XSRM 34, 50, and 104 G.05R (.07R for 104)

2 Slots

.06R B C.093 Dia. 4 Holes .14R G .06R DE .093 Dia. 4 Holes .203 .14R B C.05R (Typ.) .562 Polarizing Slot .125 Typ F H A B C D E F G A For All XSRM Config. DE B C .06R .14R For XSMR 7 to 26 .05R Shells are .031 thick aluminum, anodized for protection against corrosion. Either style - plug or receptacle - may be used to house a female insert, thus allowing “live” socket contacts to be cable or panel mounted. Shells also provide a means by which connector polarization is accomplished - receptacle shell is slotted for engaging a polarizing pin on plug shell. Non-polarized shells have the slot and pin omitted. G .203.13R .05R (Typ.) .06R .093 Dia. B C .562 DE .06R .05R (.07R for 104) G DE B C .093 Dia. 4 Holes.14R Polarizing Slot .125 Typ A B C D E F G A H F B C DE .06R .14R .05R For XSMR 7 to 26 For All XSRM Config. For XSRM 34, 50, and 104 For XSRM 75 SRM Series RP / 69 www.winconn.com Plug Shells Receptacle Shells Materials Polarization Dimensions

■ Step 1 Insert Series Code: SRM - When protective shells are not required. XSRM - When protective shells are required. ■ Step 2 Number of Contacts: 5, 7, 11, 14, 20, 26, 34, 50, 75 and 104. Guides NSS - Standard stainless steel cylindrical guides. N - Brass cylindrical guides. Plated, gold over copper. Jackscrews and Jacksockets C - Polarized long turning jackscrew and jacksocket for use with hoods. F - Polarized fixed jackscrew and jacksocket. M - Polarized short turning jackscrew and jacksocket. J - Non-polarized short turning jackscrews. L - Non-polarized long turning jackscrews. R - Non-polarized fixed jacksockets. ■ Step 3 Contact Designation: P - Pin S - Socket ■ Step 4 Type of Contact: Blank = Standard Solder Cup This step to be used only when a special material, finish, or style is required. Omit when standard contacts are used. Consult Sales Department for proper designation of Dip Solder Terminations ■ Step 5 Guides: (See bottom Chart) ■ Step 6 Shell Type: 0 -Shell not required SRM Series 1 -Plug shell XSRM Series 2 -Receptacle shell XSRM Series ■ Step 7 Polarization Position: A, B, C, D, E, F or G. Omit letter when polarization of shell is not required. ■ Step 8 Hoods: 0 -When no hood required. 3 -Standard size top cable opening. If extra large cable opening is desired, add “X” to end of catalog number. 4 -Standard size side cable opening. If extra large cable opening is desired, add “X” to end of catalog number. 5 -Top opening hood for use with guides. 6 -Side opening hood for use with guides. ■ Step 10 “0” fill to complete part number ■ Step 9 “0” fill to complete part number ■ Step 5 SRM 26 P C 0 300 SRM Series RP / 70 www.winconn.com

N Nylon Nut PM1SLR Plug with lock ring PM1PLS Receptacle with lock spring H10 Hood This connector was developed for applications requiring moderately high voltage ratings, this single contact connector is particularly well adapted to Photo-Flash, Aircraft, Instumentation and Communications Equipment. Dimensions are for reference only and are subject to change. Outline drawings on request. PM1PLR- Connector, plug with lock ring PM1SLS- Connector, receptacle with lock spring PM1PLS- Connector, plug with lock spring PM1SLR- Connector, receptacle with lock ring PM1P- Connector, plug without vibration lock PM1S- Connector, receptacle without vibration lock Add H10- to above numbers when ordering hoods Add H10C- to above numbers for hood with cable clamp Add N- to above numbers when ordering nylon nut receptacle with respect to each other. Mounting: Cable or panel mounted. Use nylon nut applied to either plug or receptacle. Lock Ring (and lock spring): Applied to plug or receptacle. Prevents connector rotation on panel and when engaged with lock spring, prevents accidental disconnection due to vibration, etc. Hood: Diallyl Phthalate cable hood Weight in Ounces: Receptacle .05, Plug .05, Washer .005, Hood .07, Lock Ring .017, Lock Spring .019, Nut .015 Current Rating: 7.5 amps No. of Contacts: 1 Pin Contacts: .040 dia. brass, gold plated Socket Contacts: Phosphor bronze, gold plated Terminations: .048 solder cup will accept up to #20 AWG stranded wire. Electrical Data: Dielectric withstanding voltage is one minute electrification at 5650 VAC. Dielectric: Molded Diallyl phthalate per MIL-M-14, type SDG-F. Color Gray. Polarization: Permits one engaging position only and prevents rotation of the plug and H10 Hood PM1SLRN Plug with lock ring PM1PLS Receptacle with lock spring .25 .386 Panel Drilling 30O .125 .048 Dia. Solder Cup .68 Hex. .66 .47 .25 .09 .13 .03 .75 .56 .25 .66 3/8 - 24 UNF - 2THD. .16 Cable Opening .75 .09 * When ordering hoods separately specify P/N H10T34 or H10CT34 PM6 Series High Voltage, Single Contact / #20 Contacts / .040" Dia. / 7.5 Amps RP / 71 www.winconn.com Outline Specifications

Dimensions are for reference only and are subject to change. Outline drawings on request. This connector was developed for applica- tions requiring moderately high voltage ratings, this connector of minimum bulk and weight is particularly well adapted to Photo- Flash, Aircraft, Instumentation and Communi- cations Equipment. N Nylon Nut PM6SLR Receptacle with lock ring PM6H Hood PM6PLS Plug with lock spring Polarization: Body design makes it impossible to make connection except in proper position. Mounting: Cable or panel mounted. Use nylon nut applied to either plug or receptacle. Lock Ring (and lock spring): Prohibits connector rotation on panel mounting and when engaged with lock spring, prevents accidental disconnec- tion due to vibration, etc. Hood: Molded diallyl phthalate cable hood may be applied to either plug or receptacle. Current Rating: 7.5 amps No. of Contacts: 6 Pin Contacts: .040 dia. brass, gold plated Socket Contacts: Spring temper phosphor bronze, gold plated Terminations: .048 dia. solder cup accepts up to #20 AWG stranded wire. Electrical Data: Dielectric withstanding voltage is one minute electrification at 3560 VAC. Dielectric: Molded Diallyl phthalate per MIL-M-14, type SDG-F. Color Gray. PM6PLS- Connector, plug with lock spring PM6SLR- Connector, receptacle with lock ring PM6PLR- Connector, plug with lock ring PM6SLS- Connector, receptacle with lock spring PM6P- Connector, plug without vibration lock PM6S- Connector, receptacle without vibration lock Add H- to above numbers when ordering hoods Add N- to above numbers when ordering nylon nut .53 .0995 Dia. 30O .875 Dia. 1.125 1.219 Nut Molding .048 Dia. Solder Cup .94 Hex .53.25 .13 .025 .16 .22 .015 .13 .25.53.36 .22 7/8 20 UNEF 2A 1.031 .38 Dia. Cable Opening 1.266 .78 Dia. Panel Drilling PM6SLRN Receptacle PM6PLS Plug PM6H Hood PM6 Series RP / 72 www.winconn.com Outline Specifications

Electrical Data: Dielectric withstanding voltage is one minute electrification at 1200 VAC. Dielectric: Diallyl Phthalate per MIL-M-14, type SDG-F. Color Gray. Polarization: Body design allows engage- ment in only one position. Mounting: Either plug or receptacle may be mounted on chassis or bulkhead with 1/4 - 28 cadmium plated brass nut. Add “ N” to code number to order. Hood: Cable hood may be applied to both plug and receptacle. Add “H” to code number. When Current Rating: SM1 - 7.5 amps; SM2, SM3 - 3 amps No. of Contacts: 1, 2, 3 Pin Contacts: SM1 - .040 dia. brass, gold plated SM2, SM3 - .025 dia. brass, gold plated Socket Contacts: Phosphor bronze, gold plated Terminations: SM1 - .048 dia. solder cup will accept up to #20 AWG stranded wire. SM2, SM3 - .037 dia. solder cup will accept up to #24 AWG stranded wire. N Nylon Nut SM2 Receptacle SM2P Plug SMH Hood Extreme compactness and lightweight of these subminiature connectors make them ideal for limited space application in Aircraft. Portable Equipment and Instrumentation. Current Rating Weight in Ounces * Wire Range P. R. SM1 - 7.5 Amp .02 .02 SM1 - #20 SM2 - 3 Amp .02 .02 SM2 - #24 SM3 - 3 Amp .02 .02 SM3 - #24 * Stranded PHYSICAL AND ELECTRICAL DATA ordering a hood separately, order P/N SMH. SM Series Sub Miniature / #20 - #24 Contacts / 3 And 7.5 Amps RP / 73 www.winconn.com Specifications Physical and Electrical Data

Dimensions are for reference only and are subject to change. Outline drawings on request. Panel Opening .100 .255 .31 Hex. .048 Dia. Solder Cup 1/4 - 28 UNF-2 THD. .09.25 .55 .28 .31 .040 Dia. .09 .55 .25 .50 .13 .50 .13.31 .23 .22 .19 .55 1/4 - 28 UNF-2 THD. .23 1/4 - 28 UNF-2 THD. .55 .17 .06 .19 .100 .255 .31 .09 .31 .09 .23 .23 .17 .06 .19 .55 .55 .19.22 1/4 - 28 UNF - 2 THD. .13 .50 Receptacle SM1SN Plug SM1P Hood Receptacle SM2SN Plug SM2P Hood Plug SM3P HoodReceptacle SM3SN 3SSM H ■ Step 4 Type: N = Nut H = Hood ■ Step 3 No. of Contacts: 1, 2, 3 ■ Step 4 Contact Type: P = Pin S = Socket ■ Step 1 Series Code: Series SM SMH SMH SMH SM Series RP / 74 www.winconn.com Outline

Plug with lock spring and hood M4SLRGN Receptacle with lock ring, ground lug and nut M10SLRN Receptacle with lock ring and nut M10PLSH19 Plug with lock spring and hood N Nylon Nut M12SLS12 Receptacle with lock spring M12P Plug M12H Hood with lock shell The extreme compactness and lightweight of M connectors make them ideal for such applications as strain gauges, telemetry and pressure pick-up installations in aircraft, portable equipment and instrumentation. Polarization: Body design permits engage- ment in proper position only. Mounting: For 1/16" panel mounting of either plug or receptacle use cadmium plated brass nut for M4-10, nylon nut for M12. Add “N” to code number. Lock Ring (and lock spring): May be applied to plug or receptacle to stop connector rotation on panel. When engaged with lock spring, prevents accidental disconnec- tion due to vibration, etc. Ground Lug: Can be used to ground any of the 4 contacts on M4 connec- tor. Add “ G” to code number. Hood: Anodized aluminum or brown mineral filled diallyl phthalate hoods may be applied to plug or receptacle of M4-M10. With or without cable clamps to provide additional strain relief for the cable. Current Rating: 7.5 amps No. of Contacts: 4, 5, 7, 9, 10, 12 Pin Contacts: .040 dia. brass, gold plated Socket Contacts: Spring temper phosphor bronze, gold plated Terminations: .048 dia. solder cup accepts up to #20 AWG stranded wire. M12 - .043 dia. solder cup accepts up to #20 AWG stranded wire. Electrical Data: The dielectric withstanding voltage is one minute electrification at 1500 VAC. (2250 VAC for M12). Dielectric: Brown mineral filled diallyl phthalate. Also available in gray glass filled diallyl phthalate, per MIL-M-14, SDG-F. M Series High Voltage Miniature / #20 Contacts / .040" Dia. / 7.5 Amps RP / 75 www.winconn.com Specifications

Catalog of Lock Lock Lock Hole Current Number Contacts Plug Rec. Nut Spring Ring Washer Dia./in. Rating M7S M9S .56 .0995 Dia. .890 Dia. Panel Opeming 1.125 Nut .38 1.250 7/8 - 20 THD .16.16 .38 .91 .47 M21S .25 .048 Dia. Solder Cup .34 .53 3/8 - 24 UNF THD Lock Spring (LS) .09 .53 .34 .13 .09 Lock Ring (LR) .25 3/8 - 24 UNF THD Nut & Lockwasher (N)Ground Lug (G) .63 .47 .50 .385 .250 .125 30O .72 .25 .56 A/F Hex Nut .66 (See Views Below) .048 Dia. Solder Cup .44 .09 Lockwasher 1/2 - 20 UNF THD. 1/2 - 20 UNF THD. .77 .09 .44 Accessory Code LR — Lock Ring LS — Lock Spring LN— Nut & Lockwasher LN — to be used as suffixes LN — when required. .34 30O .099 Dia. .515 Dia. Receptacle M*S-LRN Plug M*P-LS Receptacle M4S-LRGN Plug M4P-LS Contact Arrangement M5S Contact Arrangement M7S Contact Arrangement M9S Contact Arrangement M10S Panel Drilling (Viewed from Front of Panel) Panel Drilling .69 Dimensions are for reference only and are subject to change. Outline drawings on request. Contact locations are shown from terminal sides NOTE: Contact arrangement of M * P are reversed * Insert number, indicating number of contacts (5, 7, 9, 10) M Series RP / 76 www.winconn.com Outline Physical & Electrical Data

Molded diallyl phthalate cable hoods protect soldered wires and facilitate disengagement of connectors. Cable clamps provide additional strain relief and support. They are supplied on hoods with “ C” in the code number. Clamps are cadmium plated with olive drab iridite finish. Anodized aluminum hoods are precision machined from bar stock to give greater strength than die cast units. Cable clamps are machined as an integral part of the connector. The set screw prevents accidental disassembly from vibration, etc. A polyethylene sleeve liner provides added insulation in the terminal area. C standard hoods hood with cable clamps H9, H10, H19 M12H modified hoods H9C, H10C, H19C, H19CS special hoods special hood with cable clamps Used on Connectors M5, M7, M9, M10 H9S, H19S HG9, HG18 aluminum hoods HG9C A SLOT 0.38 WIDE F E D B .38 .438 WIDE x .313 HIGH CABLE OPENING 1.125 MAX. 1.188 C F E D B A CABLE OPENING F D B A CABLE OPENING .14 CABLE OPENING .66 BC D F A CABLE OPENING 1.438WHEN CONNECTED 1.00 .19 .56 DIA 4-40 SET SCREW .94 SET SCREW (4-40) H14 For M4 H16 For M5, M7, M9, M10 .22 CABLE OPENING .66 .25CABLE OPENING 1.188WHEN CONNECTED .83 C 1.375 Dimensions are for reference only and are subject to change. Outline drawings on request. 1/2 -20 NF2 M Series RP / 77 www.winconn.com Molded Diallyl Phthalate and Aluminum Hoods Outline

Number Connectors A B C D E F-Thds Ounces HG9C M5, 7, 9, 10 See Drawing .14 H14 M4 See Drawing .25 H16 M5, 7, 9, 10 See Drawing .25 H12H M12 See Drawing 1.10 ■ Step 1 Series Code: M series M P/S ■ Step 7 Hoods: See hood code number above. Omit steps not required ■ Step 6 G = Ground lug (M4 only) ■ Step 5 N = Nut ■ Step 4 LS = lock spring LR = lock ring LS6 = M12 lock spring LR6 = M12 lock ring LS12 = lock spring for M12H hood ■ Step 3 Contact Type: P = Pin S = Socket ■ Step 2 No. of Contacts: 4, 5, 7, 9, 10, 12 M Series RP / 78 www.winconn.com Physical Data

Dimensions are for reference only and are subject to change. Outline drawings on request. Side Mounting, 4 Position Rectangular 2 and 4 Position In-Line JF Series, PIN and Socket, 2 Position In-Line Connectors Dimensions shown are typical for all standard 2 position in-line connectors. JF Series, PIN and Socket, 4 Position In-Line Connectors Dimensions shown are typical for all standard 4 position in-line connectors. .11 2.8 1.00 25.4 .76 19.2.55 13.9 .04 1.0 .75 19.1 .10 2.6 Thru C'Sink .18 4.6 x 82o .13 3.2 .23 5.9 .36 9.1 .05 1.3 Solder Cup .16 4.0 3 x .27 6.8 .22 5.5 JF4SAB JF4PAB .09 2.3 Thru C'Sink .17 4.3 x 82o .44 11.1 .06 1.6 .76 19.2.53 13.5 .04 1.0 .17 4.4 .34 8.7 .22 5.5 JF1S1PA JF1P1SA .05 1.3 Solder Cup .13 3.2 .08 2.0 .28 7.1 Side Mounting, 4 Position Rectangular, 2 and 4 Position In-Line JF Series, PIN and Socket, 4 Position Rectangular Connectors Dimensions shown are typical for all standard 4 position rectangular connectors. .09

2.3 Thru C'Sink

.17 4.3 x 82o .04 1.0 .13 3.2 JF2S2PAB .05 1.3 Solder Cup .06 1.6 .44 11.1 .53 13.5 .76 19.2 JF2P2SAB .17 4.4 .34 8.7 .22 5.5 .25 6.4 .08 2.0 .28 7.1 JF Series Miniature Side Mount / #20 Contacts / .040" Dia. / 7.5 Amps RP / 79 www.winconn.com Outline

Dimensions are for reference only and are subject to change. Outline drawings on request. Right Angle Dip Solder Straight Dip Solder Typical Connector With DIP Solder Termination JF Series connectors may be ordered with dip solder and right angle terminations. Consult factory for availability. .343 90 o R.025 .125 .437 .062 2x .025 2x .237 ±.015 D .03 0.8 JF1S1PD4 Typical Connectors Assemblies JF1S1PA PIN Contact Pos. B Socket Contact Pos. B PIN Contact Pos. A Socket Contact Pos. A Socket Molding PIN Molding B A B A JF1P1SA PIN Contact Pos. C & D Socket Contact Pos. C & D PIN Contact Pos. A & B Socket Contact Pos. A & B Socket Molding PIN Molding JF4SAB JF4AB PIN Contact Pos. A, C & D Socket Contact Pos. A, C & D PIN Contact Pos. B Socket Contact Pos. B Socket Molding PIN Molding JF1S3PB JF1P3SB B A C C A B The versitile JF Series has a countersunk mounting hole and narrow width permitting exceptionally flat mounting. Maximum circuit density is provided with many positive polarizations. “Custom” multi-contact connectors are readily available by using the building block technique shown above. JF Series RP / 80 www.winconn.com Outline

■ Step 3 Secondary Contact Code If Step 2 equals 1P = 1S 1S = 1P ■ Step 4 Primary Contact Location Code = A or B ■ Step 1 Series Code JF ■ Step 2 ** Primary Contact and Molding Type Code Description 1S or 2S* Number of socket contacts and socket molding. 1P or 2P* Number of pin contacts and pin molding. 2SR* Number of socket contacts pin moldings. 2PR* Number of pin contacts socket moldings. JF

2 Position In-Line Connector

4 Position In-Line Connectors

■ Step 3 Primary Contact Location Code Number Of Primary Contacts A, B, C or D = 1 AB, AC, AD, BC, BD, or CD = 2 ABC, ABD, ACD, or BCD = 3 For four same type contacts: omit step For four same type contacts with molding gender reversed, add R ■ Step 1 Series Code JF4 ■ Step 2 Primary Contact and Molding Type Code Description S Socket contact and socket molding. P Pin contact and pin molding. Performance Characteristics Dielectric Withstanding Voltage: 1500 VAC (at sea level) Current Rating: 7.5 Amps Operating Temperature Range: -55 OC to +125OC Termination Type: .050 dia. solder cup to accept #20 AWG stranded wire. Materials Moldings (PIN and Socket): Diallyl Orthophthalate Pin Contacts: .040 Brass, gold plated Socket Contacts: Phosphor bronze, gold plated 1S 1P A SA B ■ Step 3 Secondary Contact Code If Step 2 equals 3P = 1S 2P = 2S 1P = 3S 3S = 1P 2S = 2P 1S = 3P ■ Step 1 Series Code JF ■ Step 2 Primary Contact and Molding Type Code Description 1S, 2S, 3S or 2S2S Number of socket contacts and socket molding. 1P, 2P, 3P or 2P2P* Number of pin contacts and pin molding. 2S2SR* Number of socket contacts and pin molding. 2P2PR Number of pin contacts and socket molding. *For four same type contacts, skip Steps 3 & 4. JF

4 Position Rectangular Connector

■ Step 4 Primary Contact Location Code Number Of Primary Contacts A, B, C or D = 1 AB, AC, AD, BC, BD, or CD = 2 ABC, ABD, ACD, or BCD = 3 **For Pictorial Presentation, see RP/ 79 and RP/80 *For two same type contacts, skip Steps 3 & 4. JF Series RP / 81 www.winconn.com

070 DIA

.34 .0625 DIA .172.172 JFA 2 .089 DIA HOLE .203 DIA. X 82O C'SINK BOTH SIDE S (TYP) .13 .34 .172 .44 .22 JFA2H .25 .44 .218 .53 .25 .78 .53 .34 Electrical Data: Dielectric withstanding voltage is one minute electrification at 2925 VAC. Dielectric: Molded diallyl phthalate per MIL-M-14 Hood: Locked to connector by means of two side mounted straps. Current Rating: 13 amps No. of Contacts: 2 Pin Contacts: .062 dia. brass, gold plated Socket Contacts: Phosphor bronze, gold plated Terminations: .070 dia. solder cup will accept up to #16 AWG stranded wire. Dimensions are for reference only and are subject to change. Outline drawings on request. JFA2H — JFA2P Hood and plug JFA2H Hood JFA2S Receptacle For applications in electronic and communica- tions equipment requiring miniature connec- tors with high current capacity. Series JFA miniature connectors may be used in television, radio and communications equipment. The countersunk side mounting hole and narrow width permits exceptionally flat mounting —thereby minimizing connector protrusion when installed on equipment J FA-2S Receptacle JFA-2P Plug JFA-2H Hood Physical Data Number Current WireCode of Rating Size Weight Number Contacts Amps A.W.G. Ozs. JFA-1P1S 1 Pin 1 Socket .082 JFA-2PH 2 Pins 13 # 16 .059 JFA-2SH 2 Sockets .046 (with hoods) JFA-1S1P 1 Pin 1 Socket .082 JFA-2P 2 Pins 13 # 16 .059 JFA-2S 2 Sockets .046 (no-straps- on hoods) JFA2H — Hood — used on any of above 3 parts Mating Combinations JFA2P mates with JFA2S JFA2PH mates with JFA2SH JFA1P1S-A mates with JFA1S1P-A JFA1P1S-B mates with JFA1S1P-B JFA1P1SH-A mates with JFA1S1PH-A JFA1P1SH-B mates with JFA1S1PH-B JFA Series Miniature Side Mount / #16 Contacts / .062" Dia. / 13 Amps RP / 82 www.winconn.com Specifications Outline

6x Actual Size — Typical Removable Contact Specifications: Conforms to applicable portions of MIL-C-39029 Wire Sizes: From a minimum 28 to a maximum 14 AWG. All contacts are designed to accept a minimum AWG conductor up to two sizes below maximum gage (each contact.) Termination Types: Crimp, solder, dip solder or wire-wrap Current Rating: 7.5 Amps maximum for .040 contacts. 13 Amps maximum for .062 contacts. Pin Contacts: Copper Alloy, gold plated. Socket Contacts: Closed entry type machined from copper alloy, gold plated. Tools: Complete line available. Includes automatic pneu- matic, pneumatic hand operated, hand operated crimping tools, insertion and removal tools. Military To Order: Specify by catalog number Note: Series 100 Removable Contacts are not supplied with the connector. They must be ordered as a separate item. Winchester Electronics removable contacts allow quick, easy removal and replacement of any contact without disturbing another - and without discarding the connector. They offer exceptional flexibility in both the choice and revision of circuitry for rack and panel equipment ... at substantial savings in replacement and installation time. In addition, wiring costs are significantly lowered, as wires may be assembled away from the connector itself. Assembly of contacts to wires is further simplified by crimp type contacts. A contact is slipped on the wire, inserted in the crimping tool, and crimped securely in place in seconds. Compact and self-aligning, these removable contacts provide high retention force and exceptional mechanical and electrical reliability. Solder type removable contacts are available for connectors using MRAC contacts.

100 Series

www.winconn.com Specifications

Loose Contact Accom- Diameter For Loose Contacts For Loose Contacts For Reeled Contacts Contact Part modates Used In (See Drawings) Mating Description See AMPS Gage Plug Hand Tool Positioner Gage Plug Pneumatic Depth Gage Plug Part Number Conductor Connector AB Pin of Figure per Locator Hand Pneumatic Part Part Part Part Tool Part Block Part Part Number 2,000/Reel Sizes Series Diameter Contacts Number Cont Tool Tool Number Number Number Number Number Number Number 100-1014P 100-0909P 14-16 MRAC, TMRAC, .081 .105 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-22 107-0970 107-0981 5431-17 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1014S 100-0919S 14-16 MRAC, TMRAC, .081 .105 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-22 107-0970 107-0981 5431-17 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1016P 100-0911P 16-18-20 MRAC, TMRAC, .067 .092 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1016S 100-0921S 16-18-20 MRAC, TMRAC, .067 .097 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1018P 100-0913P 18-20-22 MRAC, TMRAC, .052 .078 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1018S 100-0923S 18-20-22 MRAC, TMRAC, .052 .078 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-1020P 100-0915P 20-22-24 MRAC, TMRAC, .045 .067 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1020S 100-0925S 20-22-24 MRAC, TMRAC, .045 .065 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1022P 100-0907P 22-24-26 MRAC, TMRAC, .033 .055 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1022S 100-0908S 22-24-26 MRAC, TMRAC, .033 .055 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1024P 100-0917P 24-26-28 MRAC, TMRAC, .027 .055 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1024S 100-0927S 24-26-28 MRAC, TMRAC, .027 .055 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1026P 100-0963P 26-28-30 MRAC, TMRAC, .024 .050 .062 Crimp 1 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-1026S 100-0965S 26-28-30 MRAC, TMRAC, .024 .050 .062 Crimp 2 13 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2016P 100-0949P 16-18-20 MRAC, TMRAC, .067 .096 .040 Crimp 3 7.5 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-2016S 100-0939S 16-18-20 MRAC, TMRAC, .067 .096 .040 Crimp 4 7.5 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-2018P 100-0943P 18-20-22 MRAC, TMRAC, .052 .078 .040 Crimp 3 7.5 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-2018S 100-0933S 18-20-22 MRAC, TMRAC, .052 .078 .040 Crimp 4 7.5 107-0945 107-0903-2A 107-0918 5431-14 107-0970 107-0977 5431-11 107-0961 107-0966 5431-14XAC, TXAC Contact 100-2020P 100-0945P 20-22-24 MRAC, TMRAC, .045 .065 .040 Crimp 3 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2020S 100-0935S 20-22-24 MRAC, TMRAC, .045 .065 .040 Crimp 4 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2022P 100-0947P 22-24-26 MRAC, TMRAC, .033 .055 .040 Crimp 3 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2022S 100-0937S 22-24-26 MRAC, TMRAC, .033 .055 .040 Crimp 4 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2024P 100-0951P 24-26-28 MRAC, TMRAC, .027 .055 .040 Crimp 3 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact 100-2024S 100-0941S 24-26-28 MRAC, TMRAC, .027 .055 .040 Crimp 4 7.5 107-0945 107-0903-2A 107-0918 5431-15 107-0970 107-0976 5431-12 107-0961 107-0965 5431-15XAC, TXAC Contact

100 SERIES CONTACTS

RP / 84 www.winconn.com

100-2514P Not 14-16-18 MRAC, TMRAC, .081 .105 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2514S Not 14-16-18 MRAC, TMRAC, .081 .105 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2516P Not 16-18-20 MRAC, TMRAC, .067 .097 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2516S Not 16-18-20 MRAC, TMRAC, .067 .097 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2518P Not 18-20-22 MRAC, TMRAC, .052 .076 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2518S Not 18-20-22 MRAC, TMRAC, .052 .076 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2520P Not 20-22-24 MRAC, TMRAC, .045 .065 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2520S Not 20-22-24 MRAC, TMRAC, .045 .065 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2522P Not 22-24-26 MRAC, TMRAC, .033 .055 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2522S Not 22-24-26 MRAC, TMRAC, .033 .055 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2524P Not 24-26-28 MRAC, TMRAC, .027 .055 .062 Solder 5 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2524S Not 24-26-28 MRAC, TMRAC, .027 .055 .062 Solder 6 13 N/A Solder ContactAvailable XAC, TXAC Contact 100-2616P Not 16-18-20 MRAC, TMRAC, .067 .096 .040 Solder 7 7.5 N/A Solder ContactAvailable XAC, TXAC Contact 100-2616S Not 16-18-20 MRAC, TMRAC, .067 .096 .040 Solder 8 7.5 N/A Solder ContactAvailable XAC, TXAC Contact 100-2620P Not 20-22-24 MRAC, TMRAC, .045 .065 .040 Solder 7 7.5 N/A Solder ContactAvailable XAC, TXAC Contact 100-2620S Not 20-22-24 MRAC, TMRAC, .045 .065 .040 Solder 8 7.5 N/A Solder ContactAvailable XAC, TXAC Contact 100-4020P 100-0801P 20-22 SREC, 42 Series See Drawing .030 Crimp 23 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-4020S 100-0802S 20-22 SREC, 42 Series See Drawing .030 Crimp 24 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-4024P 100-0805P 24-26-28 SREC, 42 Series See Drawing .030 Crimp 25 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-4024S 100-0806S 24-26-28 SREC, 42 Series See Drawing .030 Crimp 26 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-4028P 100-0809P 28-30 SREC, 42 Series See Drawing .030 Crimp 27 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-4028S 100-0810S 28-30 SREC, 42 Series See Drawing .030 Crimp 28 5 107-43302 107-43300 5431-25 107-0961 107-0965 5431-15Contact 100-51014S 100-0981S 14-16 MRAC, TMRAC, .081 .105 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-14 107-0961 107-0966 5431-14XAC, TXAC Crimp 100-51016S 100-0982S 16-18-20 MRAC, TMRAC, .067 .094 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-14 107-0961 107-0966 5431-14XAC, TXAC Crimp 100-51018S 100-0983S 18-20-22 MRAC, TMRAC, .052 .078 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-14 107-0961 107-0966 5431-14XAC, TXAC Crimp 100-51020S 100-0984S 20-22-24 MRAC, TMRAC, .045 .067 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-15 107-0961 107-0965 5431-15XAC, TXAC Crimp Reeled Loose Contact Accom- Diameter For Loose Contacts For Loose Contacts For Reeled Contacts Contact Part modates Used In (See Drawings) Mating Description See AMPS Gage Plug Hand Tool Positioner Gage Plug Pneumatic Depth Gage Plug Part Number Conductor Connector AB Pin of Figure per Locator Hand Pneumatic Part Part Part Part Tool Part Block Part Part Number 2,000/Reel Sizes Series Diameter Contacts Number Cont Tool Tool Number Number Number Number Number Number Number Continued on page RP /8 6 www.winconn.com

100-51022S 100-0985S 22-24-26 MRAC, TMRAC, .033 .055 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-15 107-0961 107-0965 5431-15XAC, TXAC Crimp 100-51024S 100-0986S 24-26-28 MRAC, TMRAC, .027 .055 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-15 107-0961 107-0965 5431-15XAC, TXAC Crimp 100-51026S 100-0987S 26-28-30 MRAC, TMRAC, .024 .050 .062 3 Piece 19 13 107-0945 107-0903-2A 107-0918 5431-15 107-0961 107-0965 5431-15XAC, TXAC Crimp 100-54020S 100-0804S 20-22 SREC, 42 Series See Drawing .030 3 Piece 20 5 107-43302 107-43300 5431-25Crimp 100-54024S 100-0823S 24-26 SREC, 42 Series See Drawing .030 3 Piece 21 5 107-43302 107-43300 5431-25Crimp 100-54028S Not 28-30 SREC, 42 Series See Drawing .030 3 Piece 22 5 107-43302 107-43300 5431-25Available Crimp Inner Outer Contact Contact 100-8000P Not RG178, MRAC, TMRAC, See Drawing .078 Shielded 31 — 107-43303 107-43300 5431-26 107-0903-2A 107-0944Available 196/U XAC, TXAC Crimp 100-8000S Not RG178, MRAC, TMRAC, See Drawing .078 Shielded 32 — 107-43303 107-43300 5431-26 107-0903-2A 107-0944Available 196/U XAC, TXAC Crimp 100-8001P Not RG161,179 MRAC, TMRAC, See Drawing .078 Shielded 31 — 107-43303 107-43300 5431-26 107-43330 Not Available 187/U XAC, TXAC Crimp Required 100-8001S Not RG161,179 MRAC, TMRAC, See Drawing .078 Shielded 32 — 107-43303 107-43300 5431-26 107-43330 Not Available 187/U XAC, TXAC Crimp Required 100-8003P Not RG174,188 MRAC, TMRAC, See Drawing .078 Shielded 31 — 107-43303 107-43300 5431-26 107-43330 Not Available 316/U XAC, TXAC Crimp Required 100-8003S Not RG174,188 MRAC, TMRAC, See Drawing .078 Shielded 32 — 107-43303 107-43300 5431-26 107-43330 Not Available 316/U XAC, TXAC Crimp Required 7130 Not Dip MRAC, TMRAC Not Applicable .062 Dip 9 13 N/A Dip SolderAvailable Solder Solder 7131 Not Dip MRAC, TMRAC Not Applicable .062 Dip 10 13 N/A Dip SolderAvailable Solder Solder 8122 Not Wire SREC Not Applicable .030 Wire 13 5 N/A Wire WrapAvailable Wrap Wrap 8123 Not Wire SREC Not Applicable .030 Wire 14 5 N/A Wire WrapAvailable Wrap Wrap 8124 Not Dip MRAC, TMRAC Not Applicable .062 Dip 11 5 N/A Dip SolderAvailable Solder Solder 8125 Not Dip MRAC, TMRAC Not Applicable .062 Dip 12 13 N/A Dip SolderAvailable Solder Solder 8113 Not Wire MRAC, TMRAC Not Applicable .062 Wire 16 13 N/A Wire WrapAvailable Wrap Wrap 8114 Not Wire MRAC, TMRAC Not Applicable .062 Wire 15 13 N/A Wire WrapAvailable Wrap Wrap 8105 Not Wire MRAC, TMRAC Not Applicable .062 Wire 18 13 N/A Wire WrapAvailable Wrap Wrap 8106 Not Wire MRAC, TMRAC Not Applicable .062 Wire 17 13 N/A Wire WrapAvailable Wrap Wrap 100-S = Military Contacts Reeled Loose Contact Accom- Diameter For Loose Contacts For Loose Contacts For Reeled Contacts Contact Part modates Used In (See Drawings) Mating Description See AMPS Gage Plug Hand Tool Positioner Gage Plug Pneumatic Depth Gage Plug Part Number Conductor Connector AB Pin of Figure per Locator Hand Pneumatic Part Part Part Part Tool Part Block Part Part Number 2,000/Reel Sizes Series Diameter Contacts Number Cont Tool Tool Number Number Number Number Number Number Number RP / 86 www.winconn.com

M39029 Winchester modates Used In Mating Description See AMPS MIL Spec Winchester Insertion Insertion Removal Removal Part Part Conductor Connector AB Pin of Figure per Crimp Crimp MIL Spec Winchester Tool Tool Tool Tool Number Number Sizes Series Dia. Contacts Number Cont Tool Tool Positioner Positioner MIL Winchester MIL Winchester M39029/34-271 100R-2020P95 20-22-24 M28748 .045 .067 .040 Crimp 3 7.5 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/34-272 100R-1020P95 20-22-24 M28748 .045 .067 .062 Crimp 1 13 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/34-273 100B-1016P95 16-18-20 M28748 .067 .092 .062 Crimp 1 13 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/34-440 100-202861-50 22-24-26 M28748 .035 .056 .030 Crimp 29 5 M22520/2-01 107-43300 Buchn.614412 107-0611 M81969/18-02 IT2857 M81969/20-02 RT2855Contact M39029/35-274 100R-2020S95 20-22-24 M28748 .045 .067 .040 Crimp 4 7.5 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/35-275 100R-51020S95 20-22-24 M28748 .045 .067 .062 Crimp 19 13 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/35-276 100B-51016S95 16-18-20 M28748 .067 .092 .062 Crimp 19 13 M22520/1-01 107-0903-2A M22520/1-03 107-0945 M81969/18-01 107-1015 M81969/20-01 107R1001Contact M39029/35-441 100-202862-50 22-24-26 M28748 .035 .056 .030 Crimp 30 5 M22520/2-01 107-43300 Buchn.614412 M81969/18-02 IT2857 M81969/20-02 RT2855Contact MIL-C-39029 CONTACTS www.winconn.com MIL-C-39029 Contacts

RP / 88 www.winconn.com Outline

1.3351.335 1.335 1.335 Accepts O.062 pin. AB www.winconn.com Outline

Accepts .030 pin. www.winconn.com Outline

www.winconn.com Outline

Automatic Feed Crimping Tool 600/1200 Crimps Per Hour Catalog Number 107-0961 Air operated tool provides for a large capacity reel and foot valve control. Crimp depths are accurately controlled by interchangeable snap-in depth blocks when the tool is bench mounted. Leaves operator’s hands free. (Does not include reel or foot valve control.) Includes crimp depth blocks. Automatic Crimp Tool made up of bench mount (107-0962) and crimp t ool (107-0960). Used to crimp 100- Series. Pneumatic Hand Crimping Tool

400 Crimps Per Hour

Requires 80/120 psi. Crimp depth adjustment made by internal screw. Locators, adaptor sleeves, and gage plugs should be ordered separately. Locator 107-0945 and adapter 107-0950 supplied with tool. Hand Operated Crimping Tool 200/300 Crimps Per Hour Catalog Number 107-0903-2A (Mil-T-22520 Class II Equivalent) Gage plugs should be ordered sepa- rately. Locator 107-0945 and Spanner wrench 107-1102 supplied with tool. Miniature Hand Operated Crimping Tool Catalog Number 107-43300 This miniature version of the MS crimping tool is suited for the smaller crimp contacts such as the SREC series. It is only 7 1/2 inches long and weighs 10 1/2 ounces. Positioners are ordered separately. Miniature Hand Operated Crimping Tool Catalog Number 107-0625 Miniature tool with a continuously variable crimp depth adjustment. Locators must be ordered separately. Tool Kit Catalog Number 107K4 Includes crimping tool 107-0903-2A, locator 107-0945, insertion tool 107-1015, removal tool 107R-1001, spanner wrench 107-1102 and go/no-go gages 5431. Hand Operated Crimping Tool 200/500 Crimps Per Hour Catalog Number 107-0970 MS—3191-2 (Mil-T-22520 Class I) Ruggedly built hand tools with forged body, and four indentors machined from high grade tool steel. Size approxi- mately 9 inches long. Weight approxi- mately 19 ounces.

107 Series

Crimping Tools and Accessories RP / 92 www.winconn.com Pneumatic And Hand Crimping Tools

This tool provides fast and easy installation of guides and fixed jacks. This tool may be used with the guide set tool. Guide Set Tool This tool provides fast and easy installation of G7 and N7 Guide Sets. Screwdriver type tips are enclosed by cylindrical aligners that hold tips in place in the Guide pin and socket slots to prevent slippage. Tool holds pin or socket in place while hex nut is tightened with hex wrench. Catalog Number 107-0701 for MRE / MRA / MRAC G7 / N7 Guide Catalog Number 107-0704 for MRE 5-3, 8 / SREC N Guide Catalog Number 107-0703 for MRE / MRA / MRAC (hex size 3/16) Catalog Number 107-0708 for MRE 5-3, 8 / SRE / SREC (hex size 5/32) Removable Contact Insertion Tools Catalog Number 107-1011 for SREC Catalog Number 107-1015 for MRAC / STD & Shielded Catalog Number 107R1001 for MRAC / STD Contact Pin Straightener Catalog Number 107-1024 used on .040 or .062 dia. Gage Plug Catalog Number 5431 When ordering gage plugs, please specify: 1. Tool 2. Contact Size 3. Wire Size Removable Contact Removal Tools Catalog Number 107-1005 for MRAC / STD & Shielded Catalog Number 107-1012 for SREC Locators Catalog Used With Number Contact Tool 107-0626 SREC MRAC 107-0627 (Inner) 107-0625Shielded 107-0628 MRAC 20, 22, 24, 26 107-0945 MRAC MRAC 107-0902 & 107-43302 (Outer) 107-0903-2A Shielded Positioners Catalog Used With Number Contact Tool MRAC Pin 107-0981 and Socket #14 & 16 MRAC Pin 107-0977 and Socket 107-0970 #16 & 18 MRAC Pin 107-0976 and Socket #20, 22, 24, 26 107-43302 SREC #20 & 24 MRAC 107-43303 (Inner) 107-43300Shielded MRAC #20107-43304 22, 24, 26CRIMPING TOOLS Spanner Wrench Catalog Number 107-1102 for use with 107-0903-2A Crimping Tool Bench Mount For Crimping Tool 107-0960 Catalog Number 107-0962 includes crimp depth blocks Crimp Depth Blocks For Crimping Tools 107-0960 and 107-0961 Catalog Numbers 107-0965 - #20, 107-0966 - #16, 107-0967 - #12 Catalog Number 107R1001 for MRAC / STD www.winconn.com Crimping Tools