MR750 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Current Capacity Comparable to Chassis Mounted Rectifiers
  • Very High Surge Capacity
  • Insulated Case
  • Pb−Free Packages are Available* Mechanical Characteristics:
  • Case: Epoxy, Molded
  • Weight: 2.5 grams (approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Lead is Readily Solderable
  • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
  • Polarity: Cathode Polarity Band *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. AXIAL LEAD BUTTON CASE 194 STYLE 1 HIGH CURRENT LEAD MOUNTED SILICON RECTIFIERS 50 − 1000 VOLTS DIFFUSED JUNCTION Preferred devices are recommended choices for future use and best overall value. MARKING DIAGRAM MR7xx AYYWW/C0071 /C0071 MR7 = Device Code xx = 50, 51, 52, 54, 56 or 60 A = Location Code YY = Year WW = Work Week /C0071 = Pb−Free Package See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

http://onsemi.com (Note: Microdot may be in either location)

http://onsemi.com MAXIMUM RATINGS Characteristic Symbol MR750 MR751 MR752 MR754 MR756 MR760 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 1000 V Non−Repetitive Peak Reverse Voltage (Halfwave, single phase, 60 Hz peak) VRSM 60 120 240 480 720 1200 V RMS Reverse Voltage VR(RMS) 35 70 140 280 420 700 V Average Rectified Forward Current (Single phase, resistive load, 60 Hz) (See Figures 5 and 6) IO 22 (TL = 60°C, 1/8 in Lead Lengths) 6.0 (TA = 60°C, P .C. Board mounting) A Non−Repetitive Peak Surge Current (Surge applied at rated load conditions) IFSM 400 (for 1 cycle) A Operating and Storage Junction Temperature Range TJ, Tstg /C004265 to +175 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above t he Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

ELECTRICAL CHARACTERISTICS

Characteristic and Conditions Symbol Max Unit Maximum Instantaneous Forward Voltage Drop (iF = 100 A, TJ = 25°C) vF 1.25 V Maximum Forward Voltage Drop (IF = 6.0 A, TA = 25°C, 3/8 in leads) VF 0.90 V Maximum Reverse Current T J = 25°C (Rated DC Voltage) T J = 100°C IR 25 1.0 /C0109A mA

Figure 5. Maximum Current Ratings Figure 6. Maximum Current Ratings Figure 7. Power Dissipation Figure 8. Steady State Thermal Resistance

20 Iavg

/C0113L = 40°C/W/in. Typically and 44°C/W/in Maximum. R/C0113J = 2°C/W typically and 4°C/W Maximum. be found from: TL = 175°−R/C0113JL PF. PF may be found from Figure 7. or P.C. boards where available surface area is small.

10 Iavg

http://onsemi.com Device Package Shipping† MR750 Axial Lead

1000 Units / BoxMR750G Axial Lead

(Pb−Free) MR750RL Axial Lead 800 / Tape & ReelMR750RLG Axial Lead (Pb−Free) MR751 Axial Lead

1000 Units / BoxMR751G Axial Lead

(Pb−Free) MR751RL Axial Lead 800 / Tape & ReelMR751RLG Axial Lead (Pb−Free) MR752 Axial Lead

1000 Units / BoxMR752G Axial Lead

(Pb−Free) MR752RL Axial Lead 800 / Tape & ReelMR752RLG Axial Lead (Pb−Free) MR754 Axial Lead

1000 Units / BoxMR754G Axial Lead

(Pb−Free) MR754RL Axial Lead 800 / Tape & ReelMR754RLG Axial Lead (Pb−Free) MR756 Axial Lead

1000 Units / BoxMR756G Axial Lead

(Pb−Free) MR756RL Axial Lead 800 / Tape & ReelMR756RLG Axial Lead (Pb−Free) MR760 Axial Lead

1000 Units / BoxMR760G Axial Lead

(Pb−Free) MR760RL Axial Lead 800 / Tape & ReelMR760RLG Axial Lead (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

http://onsemi.com PACKAGE DIMENSIONS AXIAL LEAD BUTTON CASE 194−04 ISSUE H NOTES: 1. CATHODE SYMBOL ON PACKAGE. 2. 194−01 OBSOLETE, 194−04 NEW STANDARD. STYLE 1: PIN 1. CATHODE 2. ANODE A K B K D DIM MIN MAX MIN MAX INCHESMILLIMETERS A 8.43 8.69 0.332 0.342 B 5.94 6.25 0.234 0.246 D 1.27 1.35 0.050 0.053 K 25.15 25.65 0.990 1.010 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 MR750/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative