MR360

MBR350 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Dimensions in millimeters and inches Outline C - 16 CASE STYLE AND DIMENSIONS IF(AV) Rectangular 3.0 A waveform VRRM 50/60 V IFSM @ tp = 5 µs sine 460 A VF @ 3 Apk, TJ = 25°C 0.73 V TJ - 40 to 150 °C Characteristics Units The MBR350, MBR360 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Description/ FeaturesMajor Ratings and Characteristics SCHOTTKY RECTIFIER 3.0 Amp MBR350 MBR360 Bulletin PD-20594 rev. B 03/03 1www.irf.com MBR350 MBR360

MBR350, MBR360 Bulletin PD-20594 rev. B 03/03 2 www.irf.com TJ Max. Junction Temperature Range(*) -40 to 150 °C Tstg Max. Storage Temperature Range -40 to 150 °C RthJL Typical Thermal Resistance Junction 30 °C/W DC operation (* See Fig. 4) to Lead (**) wt Approximate Weight 1.2 (0.042) g (oz.) Case Style C - 16 IF(AV) Max. Average Forward Current 3.0 A 50% duty cycle @ T L = 50°C, rectangular wave form * See Fig. 4 IFSM Max. Peak One Cycle Non-Repetitive 460 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 6 80 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 5.0 mJ T J = 25 °C, IAS = 1 Amps, L = 10 mH IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Part number MBR350 MBR360 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings 50 60 Thermal-Mechanical Specifications VFM Max. Forward Voltage Drop 0.58 V @ 1.0A * See Fig. 1 (1) 0.73 V @ 3.0A T J = 25 °C 1.06 V @ 9.4A 0.49 V @ 1.0A 0.64 V @ 3.0A T J = 125 °C 0.89 V @ 9.4A IRM Max. Reverse Leakage Current 0.6 mA T J = 25 °C * See Fig. 2 (1) 8 mA T J = 100 °C V R = rated VR 15 mA T J = 125 °C CT Typical Junction Capacitance 190 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance 9.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/µs (Rated VR) Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% Parameters Value Units Conditions Parameters Value Units Conditions (**) Mounted 1 inch square PCB, thermal probe connected to lead 2mm from package Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied A Parameters Value Units Conditions < thermal runaway condition for a diode on its own heatsink (*) dPtot 1 dTj Rth( j-a)

MBR350, MR360 Bulletin PD-20594 rev. B 03/03 3www.irf.com 0.001 0.01 0.1 100 02 0 4 0 6 0 125˚C 25˚C T = 150˚CJ 100 1000 0 40 80 120 160 T = 25˚CJ Fig. 1 - Max. Forward Voltage Drop Characteristics Forward Voltage Drop - V FM (V) Instantaneous Forward Current - I F (A) Reverse Voltage - V R (V) Junction Capacitance - C T (pF) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage Reverse Current - I R (mA) Reverse Voltage - V R (V) 0.1 100 Tj = 150˚C Tj = 125˚C Tj = 25˚C

MBR350, MBR360 Bulletin PD-20594 rev. B 03/03 4 www.irf.com Fig. 6 - Max. Non-Repetitive Surge Current Fig. 5- Forward Power Loss Characteristics (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR Fig. 4 - Max. Allowable Lead Temperature Vs. Average Forward Current Average Forward Current - I F(AV) (A) Allowable Lead Temperature (°C) Average Power Loss (Watts) Average Forward Current - I F(AV) (A) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A) 0.5 1.5 2.5 DC RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 100 1000 10 100 1000 10000 At Any Rated Load Condition And With rated Vrrm Applied Following Surge 100 120 140 160 012345 DC Square wave (D = 0.50) 80% Rated Vr applied see note (2)

MBR350, MR360 Bulletin PD-20594 rev. B 03/03 5www.irf.com Ordering Information Table Device Code 1 2 3 1 - Schottky MBR Series 2 - Current Rating: 3 = 3A 3 - Voltage Rating 4 - TR = Tape & Reel package (1200 pcs) - = Box package (500 pcs) MBR 3 60 TR IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. 40 = 40V 60 = 60V