MR2835

MR2835S MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

tics for use as reverse power transient suppressor. ignition, injection and autoblocking systems from overvoltage conditions.

• High Power Capability
• Economical MAXIMUM RATINGS Parameters Symbol Value Unit DC Blocking Voltage VR 23 V Peak Repetitive Reverse Surge Current (Time Constant = 10 ms, TC = 25°C) IRSM A Non Repetitive Peak Surge Current (Halfwave, Single Phase, 50 Hz) IFSM 400 A Storage Temperature Tstg –40 to +150 °C Maximum Operating Junction Temperature TJ –40 to +150 °C THERMAL CHARACTERISTICS Parameters Symbol Value Unit Thermal Resistance Junction to Case R /C0113JC 1.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit Instantaneous Forward Voltage (IF = 100 A) (1) VF — 1.1 V Reverse Current (VR = 20 V) (1) IR — 5.0 /C0109A Breakdown Voltage (IZ = 100 mA) (1) V(BR) 24 32 V Breakdown Voltage (IZ = 80 A, TC = 85°C, PW = 80 µs) V(BR) — 40 V Breakdown Voltage Temperature Coefficient V(BR)TC — 0.09 %/°C Forward Voltage Temperature Coefficient (IF = 10 mA) VFTC — –2.0* mV/°C MECHANICAL CHARACTERISTICS Finish All External Surfaces are Corrosion Resistant Polarity Cathode to Terminal Weight 1.78 g* Maximum Temperature for Soldering 260°C for 10 s Using Belt Furnace 1. Pulse Test: Pulse Width < 300 /C0109s, Duty Cycle < 2%. * Typical

Figure 1. Load Dump Test Circuit

2.0 OHMS

curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.

24 V – 32 V

2 Motorola Power Products Division Device Data

Figure 2. Load Dump Pulse Current Figure 3. Maximum Peak Reverse Current Figure 4. Maximum Reverse Energie Figure 5. Typical Reverse Current Figure 6. Typical Forward Voltage Figure 7. Maximum Peak Reverse Power

/C0077/C0082/C0050/C0056/C0051/C0053/C0083

4 Motorola Power Products Division Device Data

CASE 460–02 ISSUE A K C H F L BD S A DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.1 9.5 0.358 0.374 B 9.5 9.9 0.374 0.390 C 5.2 5.6 0.205 0.220 D 6.4 6.8 0.252 0.268 F 3.4 3.8 0.134 0.149 H 2.0 2.4 0.079 0.095 K 11.3 11.7 0.445 0.460 L 1.7 2.1 0.067 0.083 S 6.5 6.9 0.256 0.272 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. FOOTPRINT 0.161 4.10 0.244 6.20 0.071 1.80 0.134 3.40 0.157 4.00 DIMENSIONS : inches mm TOLERANCES /C00340.1 0.004 Minimum circuit board footprint for Topcan Diode in Case 460–01 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://www.mot.com/SPS/ MR2835S/D◊