MR2520L_06 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • High Power Capability
  • Economical
  • Increased Capacity by Parallel Operation
  • Pb−Free Packages are Available* Mechanical Characteristics:
  • Case: Epoxy, Molded
  • Weight: 2.5 Grams (Approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Maximum Lead Temperature for Soldering Purposes: 350°C 3/8″ from Case for 10 Seconds at 5 lbs. Tension
  • Polarity: Indicated by Diode Symbol or Cathode Band MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit DC Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 23 V Repetitive Peak Reverse Surge Current (Time Constant = 10 ms, Duty Cycle ≤ 1%, TC = 25°C) IRSM 58 A Peak Reverse Power (Time Constant = 10 ms, Duty Cycle ≤ 1%, TC = 25°C) PRSM 2500 W Average Rectified Forward Current , (Single Phase, Resistive Load, 60 Hz, TC = 125°C) (See Figure 4) IO 6.0 A Non−Repetitive Peak Surge Current, Surge Supplied at Rated Load Conditions Halfwave, Single Phase IFSM 400 A Operating and Storage Junction Temperature Range TJ, Tstg −65 to +175 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MICRODE AXIAL CASE 194 STYLE 1 OVERVOLTAGE TRANSIENT SUPPRESSOR 24 − 32 VOLTS MR2520LAYYWW /C0071 /C0071 A = Assembly Location YY = Year WW = Work Week /C0071 = Pb−Free Package http://onsemi.com (Note: Microdot may be in either location) See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

http://onsemi.com THERMAL CHARACTERISTICS Characteristic Lead Length Symbol Max Unit Thermal Resistance, Junction−to−Lead, Both Leads to Heat Sink with Equal Length 6.25 mm 10 mm 15 mm R/C0113JL 7.5 °C/W Thermal Resistance Junction−to−Case − R/C0113JC 1.0 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit Instantaneous Forward Voltage (Note 1) (I F = 100 A, TC = 25°C) VF − 1.25 V Instantaneous Forward Voltage (Note 1) (I F = 6.0 A, TC = 25°C) VF − 0.90 V Reverse Current (V R = 20 Vdc, TC = 25°C) IR − 10 nAdc Reverse Current (V R = 20 Vdc, TC = 25°C) IR − 300 nAdc Breakdown Voltage (Note 1) (I R = 100 mAdc, TC = 25°C) V(BR) 24 32 V Breakdown Voltage (Note 1) (I R = 90 A, TC = 150°C, PW = 80 /C0109s) V(BR) − 40 V Dynamic Resistance (IR = 100 mA, TJ = 25°C, f = 1.0 kHz) RZ − 5.0 /C0087 Dynamic Resistance (IR = 40 mA, TJ = 25°C) RZ − 0.15 /C0087 Breakdown Voltage Temperature Coefficient V(BR)TC − 0.09* %/°C Forward Voltage Temperature Coefficient @ IF = 10 mA VFTC − −2* mV/°C 1. Pulse Test: Pulse Width ≤ 300 /C0109s, Duty Cycle ≤ 2%. *Typical Device Package Shipping† MR2520L Microde Axial 1000 / BoxMR2520LG Microde Axial (Pb−Free) MR2520LRL Microde Axial 800 / Tape & ReelMR2520LRLG Microde Axial (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

Figure 7. Maximum Peak Reverse Current Figure 8. Maximum Peak Reverse Power Figure 9. Maximum Reverse Energy Figure 10. Reverse Power Derating Figure 11. Typical Clamping Factor

1.20 RSM, PEAK REVERSE CURRENT (A)

Figure 12. Maximum Load Dump Frequency

http://onsemi.com PACKAGE DIMENSIONS CASE 194−04 ISSUE H MICRODE AXIAL NOTES: 1. CATHODE SYMBOL ON PACKAGE. 2. 194−01 OBSOLETE, 194−04 NEW STANDARD. STYLE 1: PIN 1. CATHODE 2. ANODE A K B K D DIM MIN MAX MIN MAX INCHESMILLIMETERS A 8.43 8.69 0.332 0.342 B 5.94 6.25 0.234 0.246 D 1.27 1.35 0.050 0.053 K 25.15 25.65 0.990 1.010 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 MR2520L/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative