MR2406FR MCC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

/G01/G01

  • /G06Glass Passivated Die
  • /G06Low Forward Voltage Drop
  • /G06High Current Capability Maximum Ratings
  • /G06/G2C/G0C/G09/G04/G0A/G12/G02/G1C/G29/G06/G2D/G09/G08/G0C/G09/G04/G0A/G12/G27/G04/G09/G1D/G06/G2265°/G07/G06/G12/G05/G06/G2F150°/G07
  • /G06/G14/G12/G05/G04/G0A/G29/G09/G06/G2D/G09/G08/G0C/G09/G04/G0A/G12/G27/G04/G09/G1D/G06/G2265°/G07/G06/G12/G05/G06/G2F/G0F/G21/G2E°/G07
  • /G06Thermal Resistance Juncetion to Case (R jc):0.8 /W Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current I F(AV) 24.0A Tc =125°C Peak Forward Surge Current I FSM 300A 8.3ms, half sine Maximum Instantaneous Forward Voltage V F 1.15V IFM = 24.0A; TA = 25°C Maximum DC Reverse Current At Rated DC Blocking Voltage I R 25µA 1.0µA Tc = 25°C Tc = 100°C Typical Junction Capacitance C J 95pF Measured at 1.0MHz, V R=4.0V *Pulse test: Pulse width 300 µsec, Duty cycle 1%
  • /G06High Surge Current
  • /G06Low Leakage
  • /G06Anode To Tab Configuration /G08/G08/G08/G08INCHES /G08/G08/G08/G08M M /G08/G08/G08/G08DIMENSIONS /G08/G08/G08/G08O MCC Part Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage MR2406FR 600V 420V 600V Maximum Reverse Recovery Time T rr 250ns I F=0.5A, IR=1.0A, Irr=0.25A

600 Volts

Q A K B P N R L F G D C H J T /G01/G02/G03/G04/G05/G06/G07/G05/G08/G08/G09/G04/G03/G02/G0A/G0B/G06/G07omponents

21201 Itasca Street Chatsworth

/G07/G18/G06/G19/G0F/G1A/G0F/G0F /G1B/G15/G05/G1C/G09/G1D/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G1A /G24/G0A/G25/G1D/G06/G06/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G19 MCC

+0.5A -0.25 -1.0 1cm Set Time Base for 20/100ns/cm 25Vdc 50Ω 10Ω Oscilloscope Note 1 Pulse Generator Note 2 Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Reverse Recovery Time Characteristic And Test Circuit Diagram Figure 4 Typical Reverse Characteristics Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts Volts µAmps 20 40 60 80 100 120 .01 .02 .04 .06 T A=25°C 100 140 TA=100°C www.mccsemi.com /G01/G01 MCC