MPZ2520

MPZ2520 TDK | Alldatasheet

Document overview

• Manufacturer or author: TDK Corporation
• PDF pages: 4

Technical content

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20221025 (1/4) beads_automotive_power_mpz2520_en.fm EMC Components Chip beads For power line MPZ series (for automotive) MPZ2520 type

FEATURES

Noise reduction solution for power line. Because of its low DC resistance, it can handle large currents of 10A or more, optimal for low power consumption. The 2520 shape achieves the industry's highest rated current of 12A. Operating temperature range: –55 to +125°C APPLICATION Various ECUs, powertrains, body controls, and car multimedia (telematics). PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. Rated current vs. temperature characteristics (derating) MPZ 2520 S PH 070 A T D25 Series name L×W×T dimensions Material name Internal code Impedance Characteristic type Packaging style Internal code2.5x2.0x0.85 mm () at 100MHz Impedance DC resistance Rated current Part No. [100MHz] 85°C 125°C () Tolerance (m)max. (A)max. (A)max. 7± 3 1.25 12 10 MPZ2520SPH070ATD25 Measurement item Product No. Manufacturer Impedance 4991A+16192A Keysight Technologies DC resistance RM3542+IM9100 HIOKI AEC-Q200 0–55 –35 –15 5 25 45 65 85 105 125 Temperature (°C) Rated current (A) SPH070 REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20221025 (2/4) beads_automotive_power_mpz2520_en.fm EMC Components MPZ2520 type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ2520 series Z, X, R VS. FREQUENCY CHARACTERISTICS MPZ2520SPH070ATD25 0 100001000100101 Frequency (MHz) Impedance (Ω) SPH070 1 10 100 1000 Frequency (MHz) Impedance (Ω) Z X R

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20221025 (3/4) beads_automotive_power_mpz2520_en.fm EMC Components MPZ2520 type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT  The storage temperature range is for after the assembly. Dimensions in mm 0.50±0.30 2.50±0.15 2.00±0.150.85±0.15 Dimensions in mm 2.0 1.40.7 0.7 Natural cooling 10s max. 60 to 120s Preheating 30 to 60s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Time Peak Temperature Type A B K Package quantity 3000 pcs/reel Operating temperature range Storage temperature range Individual weight –55 to +125°C –55 to +125°C 20 mg ø180±2.0 2.0±0.5 ø13±0.2 ø21±0.8 ø60min. 14.4max. Dimensions in mm 1.0 8.4 +2.0 –0.0 8.0±0.3 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.05 Dimensions in mm Sprocket hole 1.5 +0.1 CavityK 160min. Taping 200min. 300min.Drawing direction Dimensions in mm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20221025 (4/4) beads_automotive_power_mpz2520_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% R H or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS