MPZ2012_06 EMC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
(1/2) 004-03 / 20061022 / e9413_mpz.fm
- All specifications are subject to change without notice. Chip Beads(SMD) For Power Line MPZ Series MPZ2012 Type
FEATURES
The MPZ series are multilayer chip impeders for power supply line applications. High miniaturized, these parts nonetheless exhibit low DC resistance and high current handling capability. The products contain no lead and also support lead-free soldering. It is a product conforming to RoHS directive.
APPLICATIONS
Noise elimination of DC power supply lines for USB interface circuitry, personal computers, electronic games, hard disk drives, and other general electronic equipment. Also effective as a noise countermeasure in signal lines. PRODUCT IDENTIFICATION (1)Series name (2)Dimensions L× W (3)Material code (4)Nominal impedance 331: 330Ω at 100MHz (5)Characteristic type (6)Packaging style T: Taping RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN TEMPERATURE RANGES PACKAGING STYLE AND QUANTITIES HANDLING AND PRECAUTIONS Before soldering, be sure to preheat components. The preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. The inductance value may change due to magnetic saturation if the current exceeds the rated maximum. Do not expose the inductors to stray magnetic fields. Avoid static electricity discharge during handling. When hand soldering, apply the soldering iron to the printed cir- cuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. Conformity to RoHS Directive MPZ 2012 S 331 A T Natural cooling 10s max. Preheating 60 to 120s Soldering 30 to 60s 230˚C 250 to 260˚C 180˚C 150˚C Time(s) Operating/storage –55 to +125°C Packaging style Quantity Taping 4000 pieces/reel 1.25±0.20.85±0.2 0.5±0.3 2+0.3, –0.1 Weight: 8mg Dimensions in mm 11.3 1.3 1.2 Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/2) 004-03 / 20061022 / e9413_mpz.fm All specifications are subject to change without notice.
ELECTRICAL CHARACTERISTICS
∗1 Test equipment: E4991A or equivalent Test tool: 16192A or equivalent ∗2 Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS(DERATING) about the rating current at 85°C or more in temperature of the product. RATED CURRENT vs. TEMEPERATURE CHARACTERISTICS (DERATING) TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MPZ2012S300A MPZ2012S101A MPZ2012S221A MPZ2012S331A MPZ2012S601A PACKAGING STYLES REEL DIMENSIONS TAPE DIMENSIONS Part No. Impedance (Ω)[100MHz]∗1 DC resistance (Ω)max. Rated current∗2 (A)max. MPZ2012S300A 30±10 Ω 0.01 5 MPZ2012S101A 100±25% 0.02 4 MPZ2012S221A 220±25% 0.04 3 MPZ2012S331A 330±25% 0.05 2.5 MPZ2012S601A 600±25% 0.1 2 –55 –35 –15 5 25 45 65 85 105 125 Temperature(˚C) Rated current(A) S300A S331A S101A S221A S601A 01 10 100 1000 10000 Frequency(MHz) Impedance(Ω) Z X R 160 140 120 100 01 10 100 1000 10000 Frequency(MHz) Impedance(Ω) Z R X 300 100 150 200 250 01 10 100 1000 10000 Frequency(MHz) Impedance(Ω) Z R X 400 350 300 250 200 150 100 01 10 100 1000 10000 Frequency(MHz) Impedance(Ω) Z R X 800 700 600 500 400 300 200 100 01 10 100 1000 10000 Frequency(MHz) Impedance(Ω) Z R X 1.0 ø178±2.0 2.0±0.5 ø13±0.5 ø21±0.8 ø60±2.0 13.0±1.4 9.0±0.3 Dimensions in mm 8.0±0.3 3.5±0.05 1.75±0.1 2.0±0.05 1.5 +0.1 –0.0Sprocket hole Cavity 2.3±0.21.5±0.2 160min. Taping 200min. 300min.Drawing direction Dimensions in mm