MPXV4115V FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
1.5% Maximum error over 0° to 85°C Temperature Compensated from –40° + 125°C Ideally Suited for Microprocessor or Microcontroller-Based Systems Durable Thermoplastic (PPS) Surface Mount Package Typical Applications Vacuum Pump Monitoring Brake Booster Monitoring The MPXV4115V series pressure sensors are available in the basic element package or with a pressure port. Two packing options are also offered.
ORDERING INFORMATION
Case No. MPX Series Order No. Packing Options Device Marking SMALL OUTLINE PACKAGE (MPXV4115V SERIES) Basic Elements 482 MPXV4115V6U Rails MPXV4115V 482 MPXV4115V6T1 Tape & Reel MPXV4115V Ported Elements 482A MPXV4115VC6U Rails MPXV4115V MPXV4115V SERIES INTEGRATED PRESSURE SENSOR –115 to 0 kPa (–16.7 to 2.2 psi) 0.2 to 4.6 V OUTPUT SMALL OUTLINE PACKAGE PIN NUMBER(1) 1. Pins 1, 5, 6, 7, and 8 are internal device connections. Do not connect to external circuitry or ground. Pin 1 is noted by the notch in the lead. N/C N/C VS N/C GND N/C VOUT N/C MPXV4115V6U/6T1 CASE 482-01 MPXV4115VC6U CASE 482A-01
Figure 1. Fully Integrated Pressure Sensor Schematic Table 1. Maximum Ratings(1)
- Exposure beyond the specified limits may cause permanent damage or degradation to the device.
Table 2. Operating Characteristics (VS = 5 Vdc, TA = 25°C unless otherwise noted. Decoupling circuit shown in Figure 3
- Device is ratiometric within this specified excitation range.
- Full Scale Output is defined as the output voltage at the maximum or full-rated pressure.
- Full Scale Span is defined as the algebraic difference between the output voltage at full-rated pressure and the output voltage at the
- Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span
- Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
- Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.
- Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum or maximum rated pressure at 25°C.
- TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C.
- TcOffset: Output deviation with minimum pressure applied, over the temperature range of 0° to 85°C, relative to 25°C. 1.5% %VFSS Sensitivity V/P 38.26 mV/kPa Response Time(5) 5. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. tR 1.0 ms Output Source Current at Full Scale Output Io 0.1 mAdc Warm-Up Time(6) 6. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized. ms Offset Stability(7) 7. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test. ±0.5 %VFSS
shorting between solder pads. Figure 5. SOP Footprint (Case 482)
0.060 TYP 8X
0.100 TYP 8X
Nominal Transfer Value: Vout = VS (P x 0.007652) + 0.92) ± (Pressure Error x Temp. Factor x 0.007652 x VS) VS = 5 V ± 0.25 Vdc Transfer Function Temp Multiplier –40 0 to 85 +125 Temperature in °C 4.0 3.0 2.0 0.0 1.0 –40 –20 140 120 100 Temperature Error Factor NOTE: The Temperature Multiplier is a linear response from 0°C to –40°C and from 85°C to 125°C. Temperature Error Band Pressure Error (Max) Pressure Error Band –115 to 0 kPa ±1.725 kPa –85 –60 –45 –30 –15 –115 –100 Pressure in kPa (below atmospheric) 1.950 1.725 1.500 –1.500 –1.725 –1.950 Pressure Error (kPa) MPXV4115V Series
S D 8 PL G S B M 0.25 (0.010) A S T -A- -B- N C M J K PIN 1 IDENTIFIER H SEATING PLANE -T- DIM MIN MAX MIN MAX MILLIMETERS INCHES A 10.54 0.425 0.415 10.79 B 10.54 0.425 0.415 10.79 C 5.38 0.230 0.212 5.84 D 0.96 0.042 0.038 1.07 G
0.100 BSC
2.54 BSC
H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M N 0.405 0.415 10.29 10.54 S 0.709 0.725 18.01 18.41 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT. CASE 482-01 ISSUE O SMALL OUTLINE PACKAGE PIN 1 IDENTIFIER H SEATING PLANE -T- W C M J K V DIM MIN MAX MIN MAX MILLIMETERS INCHES A 10.54 0.425 0.415 10.79 B 10.54 0.425 0.415 10.79 C 12.70 0.520 0.500 13.21 D 0.96 0.042 0.038 1.07 G H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M N 0.444 0.448 11.28 11.38 S 0.709 0.725 18.01 18.41 V 0.245 0.255 6.22 6.48 W 0.115 0.125 2.92 3.17 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT. S D 8 PL G S B M 0.25 (0.010) A T -A- -B- N S CASE 482A-01 ISSUE A SMALL OUTLINE PACKAGE MPXV4115V Sensors Freescale Semiconductor
How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005. All rights reserved. MPXV4115V Rev. 2