MPXT2010 MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Stress Isolated Top Piston Fit Package
  • Gauge Pressure Measurement
  • Temperature Compensated over 0° to +85°C
  • Unique Silicon Shear Stress Strain Gauge
  • Ratiometric to Supply Voltage
  • Available in Unibody Package (Case 344), See MPX2010 Series Data Sheet Application Examples
  • Respiratory Diagnostic Devices and Systems
  • Air Movement Control (HVAC)
  • Level Indicators
  • Controllers
  • Pressure Switching

Figure 1. Calibrated and Temperature Compensated Senseon and X–ducer are trademarks of Motorola, Inc. is noted by the notch in the Lead.

/C0077/C0080/C0088/C0084/C0050/C0048/C0049/C0048 /C0083/C0069/C0082/C0073/C0069/C0083

2 Motorola Sensor Device Data

MAXIMUM RATINGS (1) Parametrics Symbol Value Unit Overpressure(9) (P1 > P2) Pmax 75 kPa Burst Pressure(9) (P1 > P2) Pburst 100 kPa Storage Temperature Tstg –40 to +125 °C Operating Temperature TA –40 to +125 °C 1. TC = 25°C unless otherwise noted. 2. Exposure beyond the specified limits may cause permanent damage or degradation to the device. OPERATING CHARACTERISTICS (VS = 10 Vdc, TA = 25°C unless otherwise noted, P1 > P2) Characteristic Symbol Min Typ Max Unit Pressure Range(1) POP 0 — 10 kPa Supply Voltage(2) VS — 10 16 Vdc Supply Current Io — 6.0 — mAdc Offset(3) Voff –1.0 — +1.0 mV Full Scale Span(4) VFSS 24 25 26 mV Sensitivity V/P — 2.5 — mV/kPa Linearity(5) — –1.0 — +1.0 %V FSS Pressure Hysteresis(5) (0 to 10 kPa) — — ± 0.1 — %V FSS Temperature Hysteresis(5) (–40°C to +125°C) — — ± 0.5 — %V FSS Temperature Effect on Offset(5) TCV off –1.0 — +1.0 mV Temperature Effect on Full Scale Span(5) TCV FSS –1.0 — +1.0 %V FSS Input Impedance Zin 1300 — 2550 Ω Output Impedance Zout 1400 — 3000 Ω Response Time(6) (10% to 90%) tR — 1.0 — ms Warm–up Time(7) — — 20 — ms Offset Stability(8) — — ±/C02570.5 — %V FSS MECHANICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit Weight, Basic Element — — 2.0 — Grams NOTES: 1. 1.0 kPa (kiloPascal) equals 0.145 psi. 2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional error due to device self–heating. 3. Offset (Voff) is defined as the output voltage at the minimum rated pressure. 4. Full Scale Span (VFSS ) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. 5. Accuracy (error budget) consists of the following:

  • Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
  • Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.
  • Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25°C.
  • TcSpan: Output deviation over the temperature range of 0 to 85 °C, relative to 25°C.
  • TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C.
  • Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS , at 25°C. 6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. 7. Warm–up is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized. 8. Offset stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test. 9. Exposure beyond these limits may cause permanent damage or degradation to the device.

/C0077/C0080/C0088/C0084/C0050/C0048/C0049/C0048 /C0083/C0069/C0082/C0073/C0069/C0083

4 Motorola Sensor Device Data

CASE 473A–01 ISSUE A G –B– –A– P FM U R J 8 PL SBM0.25 (0.010) A ST NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5 /C0095TYPICAL DRAFT. 6. DIMENSION P TO CENTER OF LEAD WHEN FORMED PARALLEL. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.658 0.668 16.71 16.97 B 0.658 0.668 16.71 16.97 C 0.329 0.357 8.36 9.07 F 0.026 0.034 0.660 0.864 G 0.100 BSC 2.54 BSC J 0.009 0.011 0.23 0.28 L 0.138 0.150 3.81 3.51 M 0 15 0 15 P 0.738 0.748 18.75 19.00 R 0.503 0.523 12.78 13.28 U 0.135 0.145 3.43 3.68 /C0095/C0095/C0095/C0095 L –T– C DETAIL X S DETAIL X S 0.002 0.020 0.05 0.51SEATING PLANE STYLE 2: PIN 1. GROUND 2. +VOUT 3. VSUPPLY 4. –VOUT 5. N/C 6. N/C 7. N/C 8. N/C Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MPXT2010/D◊