MPXAZ6115A MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

• Resistant to High Humidity and Common Automotive Media • Improved Accuracy at High Temperature • 1.5% Maximum Error over 0 ° to 85°C • Ideally suited for Microprocessor or Microcontroller-Based Systems • Temperature Compensated from -40 ° to +125°C • Durable Thermoplastic ( PPS) Surface Mount Package Application Examples • Aviation Altimeters • Industrial Controls • Engine Control/Manifold Absolute Pressure (MAP) • Weather Station and Weather Reporting Devices Figure 1. Fully Integrated Pressure Sensor Freescale Semiconductor, Inc.

MPXAZ6115A MPXHZ6115A SERIES MPXAZ6115A Motorola Sensor Device Data NOTES: 1. Exposure beyond the specified limits may cause permanent damage or degradation to the device. 2. Maximum Output Current is controlled by effective impedance from V out to Gnd or Vout to VS in the application circuit. NOTES: 1. Device is radiometric within this specified excitation range. 2. Offset (V off) is defined as the output voltage at the minimum rated pressure. 3. Full Scale Output (V FSO) is defined as the output voltage at the maximum or full rated pressure. 4. Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. 5. Accuracy is the deviation in actual out put from nominal output over the entire pressure range and temperature range as a percent of span at 25°C due to all sources of error including the following: • Linearity: Output deviation from a stra ight line relationship with pressure over the specified pressure range. • Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied. • Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum or maximum rated pressure at 25°C. • TcSpan: Output deviation over the temperature range of 0 ° to 85°C, relative to 25°C. • TcOffset: Output deviation with minimum pressu re applied, over the temperature range of 0° to 85°C, relative to 25°C. 6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. 7. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized. 8. Offset Stability is the product's output dev iation when subjected to 1000 cycles of Pulsed Pressure, Temperature Cycling with Bias Test. MAXIMUM RATINGS(1) Parametrics Symbol Value Units Maximum Pressure (P1 > P2) Pmax 400 kPa Storage Temperature Tstg -40° to +125° °C Operating Temperature TA -40° to +125° °C Output Source Current @ Full Scale Output(2) Io+ 0.5 mAdc Output Sink Current @ Minimum Pressure Offset(2) Io- -0.5 mAdc OPERATING CHARACTERISTICS (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2.) Characteristic Symbol Min Typ Max Unit Pressure Range POP 15 - 115 kPa Supply Voltage(1) VS 4.75 5.0 5.25 Vdc Supply Current Io - 6.0 10 mAdc Minimum Pressure Offset(2) (0 to 85°C) @ VS = 5.0 Volts Voff 0.133 0.200 0.268 Vdc Full Scale Output(3) (0 to 85°C) @ VS = 5.0 Volts VFSO 4.633 4.700 4.768 Vdc Full Scale Span(4) (0 to 85°C) @ VS = 5.0 Volts VFSS 4.433 4.500 4.568 Vdc Accuracy(5) (0 to 85°C) - - - ±1.5 %VFSS Sensitivity V/P - 45.9 - mV/kPa Response Time(6) tR - 1.0 - ms Warm-Up Time(7) - - 20 - ms Offset Stability(8) - - ±0.25 - %VFSS Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Figure 2. Cross Sectional Diagram SOP Small Outline chip carrier (Case 482). Figure 3. Typical Application Circuit Figure 4. Output versus Absolute Pressure saturate outside of the rated pressure range. transmitted to the sensor diaphragm.

51 K47 pF

Freescale Semiconductor, Inc.

MPXAZ6115A MPXHZ6115A SERIES MPXAZ6115A Motorola Sensor Device Data ORDERING INFORMATION—SMALL OUTLINE PACKAGE Device Type Options Case No. MPX Series Order No. Packing Options Marking Basic Element Absolute, Element Only 482 MPXAZ6115A6U Rails MPXAZ6115A Ported Element Absolute, Axial Port 482A MPXAZ6115AC6U Rails MPXAZ6115A ORDERING INFORMATION—SUPER SMALL OUTLINE PACKAGE Device Type Options Case No. MPX Series Order No. Packing Options Marking Basic Element Absolute, Element Only 1317 MPXHZ6115A6U Rails MPXHZ6115A Ported Element Absolute, Axial Port 1317A MPXHZ6115AC6U Rails MPXHZ6115A Nominal Transfer Value: Vout = VS x (0.009 x P - 0.095) ± (Pressure Error x Temp. Factor x 0.009 x VS) VS = 5.0 ± 0.25 Vdc Transfer Function (MPXAZ6115A) MPXAZ6115A Series Break Points Temp Multiplier - 40 3 0 to 85 1 125 1.75Temperature in C° 4.0 3.0 2.0 0.0 1.0 -40 -20 0 20 40 60 14012010080 Temperature Error Factor NOTE: The Temperature Multiplier is a linear response from 0°C to -40°C and from 85°C to 125°C Temperature Error Band Error Limits for Pressure3.0 2.0 1.0 -1.0 -2.0 -3.0 0.0

20 Pressure (in kPa)

Pressure Error (kPa) Pressure Error (Max) 15 to 115 (kPa) ±1.5 (kPa) 40 60 80 100 120 Pressure Error Band Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Figure 5. SOP Footprint (Case 482 and 482A) Figure 6. SSOP Footprint (Case 1317 and 1317A)

0.060 TYP 8X

0.100 TYP 8X

0.100 TYP

0.027 TYP 8X

0.053 TYP 8X

Freescale Semiconductor, Inc.

MPXAZ6115A MPXHZ6115A SERIES MPXAZ6115A Motorola Sensor Device Data SMALL OUTLINE PACKAGE DIMENSIONS CASE 482-01 ISSUE O S D 8 PL G SBM0.25 (0.010) A ST -A- -B- N C M J K PIN 1 IDENTIFIER H SEATING PLANE -T- DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 5.380.2300.212 5.84 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0˚ 7˚ 0˚ 7˚ N 0.405 0.415 10.29 10.54 S 0.709 0.725 18.01 18.41 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT . PIN 1 IDENTIFIER H SEATING PLANE -T- W CASE 482A-01 ISSUE A C M J K V DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 12.700.5200.500 13.21 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0˚ 7˚ 0˚ 7˚ N 0.444 0.448 11.28 11.38 S 0.709 0.725 18.01 18.41 V 0.245 0.255 6.22 6.48 W 0.115 0.125 2.92 3.17 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5˚ TYPICAL DRAFT .S D 8 PL G SBM0.25 (0.010) A T -A- -B-N S Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MPXAZ6115A MPXHZ6115A SERIES Motorola Sensor Device Data MPXAZ6115A SUPER SMALL OUTLINE PACKAGE DIMENSIONS DETAIL D GAGE PLANE 0.038 0.010 .014 0.002 0.048 10˚ CASE 1317-04 ISSUE D 0.025 0.050 AM0.004 B C 0.280 A B A0.006 BC 8X 0.014 0.019 0.300 0.280 0.300 0.400 0.420 0.298 0.165 C 0.004 DETAIL D SEATING PLANE 0.278 0.145 NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994. 3. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006 INCHES PER SIDE. 4. ALL VERTICAL SURFACES TO BE 5˚ MAXIMUM. 5. DIMENSION DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .008 INCHES MAXIMUM. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MPXAZ6115A MPXHZ6115A SERIES MPXAZ6115A Motorola Sensor Device Data SUPER SMALL OUTLINE PACKAGE DIMENSIONS GAGE PLANE DETAIL E 0.048 0.010 .014 0.002 0.038 10˚ CASE 1317A-03 ISSUE A 0.025 0.050 0.025 AM0.004 B C A0.006 BC 0.014 0.018 0.325 0.345 0.325 0.345 0.400 0.420 Ø 0.130 C 0.004 DETAIL ESEATING PLANE Ø 0.110 0.390 0.370 0.200 0.180 NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994. 3. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006 INCHES PER SIDE. 4. ALL VERTICAL SURFACES TO BE 55 MAXIMUM. 5. DIMENSION DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .008 INCHES MAXIMUM. A B 0.280 0.300 0.280 0.300 BOTTOM VIEW Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MPXAZ6115A MPXHZ6115A SERIES Motorola Sensor Device Data MPXAZ6115A NOTES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MPXAZ6115A MPXHZ6115A SERIES MPXAZ6115A Motorola Sensor Device Data NOTES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

MPXAZ6115A MPXHZ6115A SERIES Motorola Sensor Device Data MPXAZ6115A NOTES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center Motorola Literature Distribution 3-20-1 Mi nami-Azabu. Minato-ku, Tokyo 106-8573, Japan P.O. Box 5405, Denver, Colorado 80217 81-3-3440-3569 1-800-521-6274 or 480-768-2130 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 HOME PAGE: http://motorola.com/semiconductors MPXAZ6115A Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notic e to any products herein. Motorola makes no warranty, represen tation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or spec ifications can and do vary in different applications and actual performance may var y over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as compon ents in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, s ubsidiaries, affiliates, and di stributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of persona l injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufa cture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are t he property of their respective owners. © Motorola, Inc. 2004 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...