MPXH6300A FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
- Improved Accuracy at High Temperature
- Available in Small and Super Small Outline Packages
- 1.5% Maximum Error over 0 ° to 85°C
- Ideally suited for Mi croprocessor or Microcontroller-Based Systems
- Temperature Compensated from –40 ° to +125°C
- Durable Thermoplastic ( PPS) Surface Mount Package Application Examples
- Industrial Controls
- Engine Control/Manifold Absolute Pressure (MAP)
ORDERING INFORMATION
No. MPX Series Order No. Packing Options Device Marking Basic Element Absolute, Element Only
1317 MPXH63000A6U Rails MPXH6300A
Absolute, Element Only
1317 MPXH6300A6T1 Tape & Reel MPXH6300A
Absolute, Axial Port 1317A MPXH6300AC6U Rails MPXH6300A Absolute, Axial Port 1317A MPXH300AC6T1 Tape & Reel MPXH6300A MPXH6300A SERIES INTEGRATED PRESSURE SENSOR 20 to 304 kPa (3.0 to 42 psi) 0.3 to 4.9 V OUTPUT MPXH6300A6U/6T1 CASE 1317-04 PIN NUMBERS(1) 1. Pins 1, 5, 6, 7, and 8 are internal device connections. Do not connect to external circuitry or ground. Pin 1 is noted by the notch in the lead.
1 N/C 5 N/C
2 VS 6 N/C
3 GND 7 N/C
4 VOUT 8 N/C
SUPER SMALL OUTLINE PACKAGES MPXH6300AC6U/C6T1 CASE 1317A-03
2 Freescale Semiconductor
Figure 1. Fully Integrated Pressure Sensor Schematic Table 1. Maximum Ratings(1)
- Exposure beyond the specified limits may c ause permanent damage or degradation to the device.
- Maximum Output Current is controlled by effective impedance from V out to GND or Vout to VS in the application circuit.
Table 2. Operating Characteristics (VS = 5.1 Vdc, TA = 25°C unless otherwise noted, P1 > P2.)
- Device is ratiometric within this specified excitation range.
- Offset (V off) is defined as the output voltage at the minimum rated pressure.
- Full Scale Output (V FSO) is defined as the output voltage at the maximum or full rated pressure.
- Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
- Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span
Linearity:Output deviation from a straight line relationship with pressure over the specified pressure range. from the minimum or maximum operating temperature points, with zero differential pressure applied. maximum rated pressure, at 25°C. TcSpan:Output deviation over the temperature range of 0 to 85°C, relative to 25°C. TcOffset:Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C. Variation from Nominal:The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.
- Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a
specified step change in pressure.
- Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
- Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
4 Freescale Semiconductor
compatibility in your application. Figure 2. Cross Sectional Diagram SSOP Figure 3. Typical Application Circuit Figure 4. Output versus Absolute Pressure
51 K47 pF
Figure 5. SSOP Footprint (Case 1317 and 1317A) NOTE: The Temperature Multiplier is a linear response from 0°C to -40°C and from 85°C to 125°C.
0.027 TYP 8X
0.053 TYP 8X
6 Freescale Semiconductor
SUPER SMALL OUTLINE PACKAGE PAGE 1 OF 3
SUPER SMALL OUTLINE PACKAGE PAGE 2 OF 3
8 Freescale Semiconductor
SUPER SMALL OUTLINE PACKAGE PAGE 3 OF 3
SUPER SMALL OUTLINE PACKAGE PAGE 1 OF 2
10 Freescale Semiconductor
SUPER SMALL OUTLINE PACKAGE PAGE 2 OF 2
Rev. 4 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007. All rights reserved.