MPXA6115A MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

  • Improved Accuracy at High Temperature
  • Available in Small and Super Small Outline Packages
  • 1.5% Maximum Error over 0° to 85°C
  • Ideally suited for Microprocessor or Microcontroller- -Based Systems
  • Temperature Compensated from - -40° to +125°C
  • Durable Thermoplastic (PPS) Surface Mount Package Application Examples
  • Aviation Altimeters
  • Industrial Controls
  • Engine Control/Manifold Absolute Pressure (MAP)
  • Weather Station and Weather Reporting Device Barometers

Figure 1. Fully Integrated Pressure Sensor chamfered corner of the package. Freescale Semiconductor, Inc.

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES MAXIMUM RATINGS(1) Parametrics Symbol Value Units Maximum Pressure (P1> P2) Pmax 400 kPa Storage Temperature Tstg -- 4 0° to +125° °C Operating Temperature TA -- 4 0° to +125° °C Output Source Current @ Full Scale Output(2) Io+ 0.5 mAdc Output Sink Current @ Minimum Pressure Offset(2) Io-- -- 0 . 5 mAdc NOTES: 1. Exposure beyond the specified limits may cause permanent damage or degradation to the device. 2. Maximum Output Current is controlled by effective impedance from Vout to Gnd or Vout to VS in the application circuit. OPERATING CHARACTERISTICS(VS =5 . 0V d c ,TA =2 5°C unless otherwise noted, P1> P2.) Characteristic Symbol Min Typ Max Unit Pressure Range POP 15 — 115 kPa Supply Voltage(1) VS 4.75 5.0 5.25 Vdc Supply Current Io — 6.0 10 mAdc Minimum Pressure Offset(2) (0 to 85°C) @V S =5 . 0V o l t s Voff 0.133 0.200 0.268 Vdc Full Scale Output(3) (0 to 85°C) @V S =5 . 0V o l t s VFSO 4.633 4.700 4.768 Vdc Full Scale Span(4) (0 to 85°C) @V S =5 . 0V o l t s VFSS 4.433 4.500 4.568 Vdc Accuracy(5) (0 to 85°C) — — — ±1.5 %VFSS Sensitivity V/P — 45 — mV/kPa Response Time(6) tR — 1.0 — ms Warm- -Up Time(7) — — 20 — ms Offset Stability(8) — — ±0.25 — %VFSS NOTES: 1. Device is ratiometric within this specified excitation range. 2. Offset (Voff) is defined as the output voltage at the minimum rated pressure. 3. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure. 4. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. 5. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span at 25°C due to all sources of error including the following:

  • Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
  • Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximumoperating temperature points, with zero differential pressure applied.
  • Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure iscycled to and from minimum or maximum rated pressure at 25°C.
  • TcSpan: Output deviation over the temperature range of 0 ° to 85°C, relative to 25°C.
  • TcOffset: Output deviation with minimum pressure applied, over the temperature range of 0 ° to 85°C, relative to 25°C. 6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. 7. Warm- -up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized. 8. Offset Stability is the product’s output deviation when subjected to 1000cycles of Pulsed Pressure, Temperature Cycling with Bias Test. Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Figure 2. Cross Sectional Diagram SSOP Figure 3. Typical Application Circuit

51 K47 pF

Super Small Outline chip carrier (Case 1317). Figure 4. Output versus Absolute Pressure are shown for operation over 0 to 85°C temperature range. The output will saturate outside of the rated pressure range. information regarding media compatibility in your application. Freescale Semiconductor, Inc.

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES Transfer Function (MPXA6115A/MPXH6115A) Nominal Transfer Value:Vout =V S x (0.009 x P - - 0.095) ± (Pressure Error x Temp. Factor x 0.009 x VS) VS =5 . 0± 0.25 Vdc Temperature Error Band MPXA6115A/MPXH6115A Series Break Points Temp Multiplier -- 4 0 3 0t o8 5 1 125 1.75 Temperature in C° 4.0 3.0 2.0 0.0 1.0 -- 4 0 -- 2 0 0 2 0 4 0 6 0 14012010080 Temperature Error Factor NOTE: The Temperature Multiplier is a linear response from 0°Ct o- - 4 0°C and from 85°C to 125°C Pressure Error Band Error Limits for Pressure3.0 2.0 1.0 -- 1 . 0 -- 2 . 0 -- 3 . 0 0.0

20 Pressure (in kPa)

Pressure Error (kPa) Pressure Error (Max) 15 to 115 (kPa) ± 1.5 (kPa) 40 60 80 100 120 ORDERING INFORMATION —SMALL OUTLINE PACKAGE Device Type Options Case No. MPX Series Order No. Packing Options Marking Basic Element Absolute, Element Only 482 MPXA6115A6U Rails MPXA6115A Ported Element Absolute, Axial Port 482A MPXA6115AC6U Rails MPXA6115A ORDERING INFORMATION — SUPER SMALL OUTLINE PACKAGE Device Type Options Case No. MPX Series Order No. Packing Options Marking Basic Element Absolute, Element Only 1317 MPXH6115A6U Rails MPXH6115A Ported Element Absolute, Axial Port 1317A MPXH6115AC6U Rails MPXH6115A Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

0.060 TYP 8X

0.100 TYP 8X

0.100 TYP

Figure 5. SOP Footprint (Case 482) Figure 6. SSOP Footprint (Case 1317 and 1317A)

0.027 TYP 8X

0.053 TYP 8X

Freescale Semiconductor, Inc.

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES NOTES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device Data MPXA6115A MPXH6115A SERIES NOTES Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES SMALL OUTLINE PACKAGE DIMENSIONS CASE 482- -01 ISSUE O DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 5.380.2300.212 5.84 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0707 N 0.405 0.415 10.29 10.54 S 0.709 0.725 18.01 18.41 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5_ TYPICAL DRAFT . ____ S D G 8P L N SBM0.25 (0.010) A ST -- A -- -- B -- C M J K PIN 1 IDENTIFIER H SEATING PLANE -- T -- CASE 482A- -01 ISSUE A DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 12.700.5200.500 13.21 D 0.960.0420.038 1.07 G 0.100 BSC 2.54 BSC H 0.002 0.010 0.05 0.25 J 0.009 0.011 0.23 0.28 K 0.061 0.071 1.55 1.80 M 0707 N 0.444 0.448 11.28 11.38 S 0.709 0.725 18.01 18.41 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5_ TYPICAL DRAFT . ____ S D G 8P L SBM0.25 (0.010) A ST -- A -- -- B -- C M J K PIN 1 IDENTIFIER H SEATING PLANE -- T -- N V W V 0.245 0.255 6.22 6.48 W 0.115 0.125 2.92 3.17 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device Data MPXA6115A MPXH6115A SERIES SMALL OUTLINE PACKAGE DIMENSIONS (CONTINUED) CASE 482B- -03 ISSUE B DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 5.330.2200.210 5.59 D 0.660.0340.026 0.864 G 0.100 BSC 2.54 BSC J 0.009 0.011 0.23 0.28 K 0.100 0.120 2.54 3.05 M 01 5 01 5 N 0.405 0.415 10.29 10.54 S 0.540 0.560 13.72 14.22 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5_ TYPICAL DRAFT . 6. DIMENSION S TO CENTER OF LEAD WHEN FORMED PARALLEL. ____ PIN 1 IDENTIFIER K SEATING PLANE-- T -- S G -- A -- -- B -- C M J N D 8P L SBM0.25 (0.010) A ST DETAIL X DETAIL X CASE 482C- -03 ISSUE B DIM MIN MAX MIN MAX MILLIMETERSINCHES A 10.540.4250.415 10.79 B 10.540.4250.415 10.79 C 12.700.5200.500 13.21 D 0.660.0340.026 0.864 G 0.100 BSC 2.54 BSC J 0.009 0.011 0.23 0.28 K 0.100 0.120 2.54 3.05 M 01 5 01 5 N 0.444 0.448 11.28 11.38 S 0.540 0.560 13.72 14.22 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006). 5. ALL VERTICAL SURFACES 5_ TYPICAL DRAFT . 6. DIMENSION S TO CENTER OF LEAD WHEN FORMED PARALLEL. ____PIN 1 K SEATING PLANE-- T -- S G -- A -- -- B -- C N V W M J V 0.245 0.255 6.22 6.48 W 0.115 0.125 2.92 3.17 IDENTIFIER D 8P L SBM0.25 (0.010) A ST DETAIL X DETAIL X Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES SUPER SMALL OUTLINE PACKAGE DIMENSIONS CASE 1317- -03 ISSUE B 0.025 0.298 0.050 AM0.004 B C 0.165 0.280 A B C NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M- -1994. 3. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006 INCHES PER SIDE. 4. ALL VERTICAL SURFACES TO BE 5° MAXIMUM. 5. DIMENSION DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .008 INCHES MAXIMUM. 0.004 A0.006 BC GAGE PLANE DETAIL E 0.023 0.010 .010 8X 0.014 DETAIL E SEATING PLANE 0.019 0.300 0.280 0.300 0.400 0.420 0.278 0.145 0.002 0.013 °10 Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device Data MPXA6115A MPXH6115A SERIES SUPER SMALL OUTLINE PACKAGE DIMENSIONS (CONTINUED) CASE 1317A- -01 ISSUE A 0.025 0.130 0.050 AM0.004 B C 0.390 0.325A B C NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M- -1994. 3. DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006 INCHES PER SIDE. 4. ALL VERTICAL SURFACES TO BE 5° MAXIMUM. 5. DIMENSION DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE .008 INCHES MAXIMUM. 0.004 A0.006 BC GAGE PLANE DETAIL E 0.048 0.010 .014 8X 0.014 DETAIL E SEATING PLANE 0.018 0.345 0.325 0.345 0.400 0.420 0.110 0.370 0.002 0.038 °10 0.200 0.180 0.280 A B 0.300 0.280 0.300 BOTTOM VIEW Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...

Motorola Sensor Device DataMPXA6115A MPXH6115A SERIES Information in this document is provided solelyto enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuitsor integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assumeany liability arising out of the application or use of any productor circuit, and specifically disclaims any and allliability, including without limitation consequential or incidental damages. “Typical” parameters that may beprovided in Motorola data sheets and/or specifications can and do vary in different applicationsand actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Motorola doesnot convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into thebody, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products forany such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury ordeath associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. E Motorola Inc. 2003 HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, Motorola Literature Distribution 3- -20- -1, Minami- -Azabu, Minato- -ku, Tokyo 106- -8573, Japan P.O. Box 5405, Denver, Colorado 80217 81- -3- - 3440- -3569 1- -800- -521- -6274 or 480- -768- -2130 ASIA/PACIFIC: Motorola Semiconductors H.K.Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852- -26668334 HOME PAGE: http://motorola.com/semiconductors MPXA6115A◊ Freescale Sem iconductor, I Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com nc...