MPX5700 MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- 2.5% Maximum Error over 0° to 85°C
- Ideally Suited for Microprocessor or Microcontroller–Based Systems
- Available in Differential and Gauge Configurations
- Patented Silicon Shear Stress Strain Gauge
- Durable Epoxy Unibody Element
Figure 1. Fully Integrated Pressure Sensor Schematic
1 Vout
- TC = 25°C unless otherwise noted. Maximum Ratings apply to Case 867–08 only.
- Extended exposure at the specified limits may cause permanent damage or degradation to the device.
- This sensor is designed for applications where P1 is always greater than, or equal to P2.
Senseon and X–ducer are trademarks of Motorola, Inc. is noted by the notch in the Lead.
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083
2 Motorola Sensor Device Data
OPERATING CHARACTERISTICS (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2) Characteristic Symbol Min Typ Max Unit Pressure Range(1) POP 0 — 700 kPa Supply Voltage(2) VS 4.75 5.0 5.25 Vdc Supply Current Io – 7.0 10 mAdc Zero Pressure Offset(3) (0 to 85 °C) Voff 0.088 0.2 0.313 Vdc Full Scale Output(4) (0 to 85 °C) VFSO 4.587 4.7 4.813 Vdc Full Scale Span(5) (0 to 85 °C) VFSS — 4.5 — Vdc Accuracy(6) (0 to 85°C) — — — ± 2.5 %V FSS Sensitivity V/P — 6.4 — mV/kPa Response Time(7) tR — 1.0 — ms Output Source Current at Full Scale Output IO+ — 0.1 — mAdc Warm–Up Time (8) — — 20 — ms Decoupling circuit shown in Figure 4 required to meet electrical specifications. MECHANICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit Weight, Basic Element (Case 867) — — 4.0 — Grams Cavity Volume — — — 0.01 IN3 Volumetric Displacement — — — 0.001 IN3 NOTES: 1. 1.0 kPa (kiloPascal) equals 0.145 psi. 2. Device is ratiometric within this specified excitation range. 3. Offset (Voff) is defined as the output voltage at the minimum rated pressure. 4. Full Scale Output (VFSO ) is defined as the output voltage at the maximum or full rated pressure. 5. Full Scale Span (VFSS ) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. 6. Accuracy (error budget) consists of the following:
- Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
- Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.
- Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25°C.
- TcSpan: Output deviation over the temperature range of 0 ° to 85°C, relative to 25°C.
- TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0° to 85°C, relative to 25°C.
- Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS , at 25°C. 7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure. 8. Warm–up is defined as the time required for the device to meet the specified output voltage after the pressure has been stabilized. 9. P2 max is 500 kPa.
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083
4 Motorola Sensor Device Data
PRESSURE (P1)/VACUUM (P2) SIDE IDENTIFICATION TABLE Motorola designates the two sides of the pressure sensor as the Pressure (P1) side and the Vacuum (P2) side. The Pressure (P1) side is the side containing fluoro silicone gel which protects the die from harsh media. The Motorola MPX pressure sensor is designed to operate with positive differen- tial pressure applied, P1 > P2. The Pressure (P1) side may be identified by using the table below: Part Number Case Type Pressure (P1) Side Identifier MPX5700D 867–08C Stainless Steel Cap MPX5700DP 867C–05 Side with Part Marking MPX5700GP 867B–04 Side with Port Attached MPX5700GS 867E–03 Side with Port Attached MPX5700GSX 867F–03 Side with Port Attached
ORDERING INFORMATION
The MPX5700 pressure sensor is available in differential and gauge configurations. Devices are available in the basic ele- ment package or with pressure port fittings that provide printed circuit board mounting ease and barbed hose pressure connec- tions. Di T Oi CT MPX Series Device Type Options Case Type Order Number Device Marking Basic Element Differential 867–08C MPX5700D MPX5700D Ported Elements Differential Dual Ports 867C–05 MPX5700DP MPX5700DP Gauge 867B–04 MPX5700GP MPX5700GP Gauge, Axial 867E–03 MPX5700GS MPX5700D Gauge, Axial PC Mount 867F–03 MPX5700GSX MPX5700D
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083 5Motorola Sensor Device Data PACKAGE DIMENSIONS BASIC ELEMENT (A, D) CASE 867–08 ISSUE N STYLE 1: PIN 1. VOUT 2. GROUND 3. VCC 4. V1 5. V2 6. VEX NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION –A– IS INCLUSIVE OF THE MOLD STOP RING. MOLD STOP RING NOT TO EXCEED 16.00 (0.630). DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.595 0.630 15.11 16.00 B 0.514 0.534 13.06 13.56 C 0.200 0.220 5.08 5.59 D 0.027 0.033 0.68 0.84 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.40 L 0.695 0.725 17.65 18.42 M 30 NOM 30 NOM N 0.475 0.495 12.07 12.57 R 0.430 0.450 10.92 11.43 S 0.090 0.105 2.29 2.66 /C0095/C0095 PIN 1 F G N L R C B M J S –A– 123456
6 PLD
PLANE –T– MAM0.136 (0.005) T POSITIVE PRESSURE (P1) PRESSURE SIDE PORTED (AP, GP) CASE 867B–04 ISSUE E STYLE 1: PIN 1. VOUT2. GROUND 3. VCC4. V1 5. V2 6. VEX NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.305 0.325 7.75 8.26 D 0.027 0.033 0.68 0.84 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.230 0.250 5.84 6.35 S U 0.910 BSC 23.11 BSC V 0.182 0.194 4.62 4.93 0.220 0.240 5.59 6.10 SEATING PLANE–T– R N C J PIN 1 –P– MQM0.25 (0.010) T B
6 PLDG
F S K V SPM0.13 (0.005) Q ST PORT #1 POSITIVE PRESSURE (P1) –Q– L U A 12 3 4 56
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083
6 Motorola Sensor Device Data
PACKAGE DIMENSIONS–CONTINUED CASE 867C–05 ISSUE F PRESSURE AND VACUUM SIDES PORTED (DP) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 1: PIN 1. VOUT2. GROUND 3. VCC4. V1 5. V2 6. VEX DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.405 0.435 10.29 11.05 D 0.027 0.033 0.68 0.84 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.063 0.083 1.60 2.11 S U 0.910 BSC 23.11 BSC V 0.182 0.194 4.62 4.93 W 0.310 0.330 7.87 8.38 X 0.248 0.278 6.30 7.06 0.220 0.240 5.59 6.10 R X 123 45 6 PORT #2 VACUUM (P2) PORT #1 POSITIVE PORT #1 PIN 1 PORT #2 POSITIVE VACUUM PRESSURE SEATING PLANE SEATING PLANE –T– –T– P G C J N B F D W V L U 6 PL S K –Q– –A–MQM0.25 (0.010) T MAM0.13 (0.005) PRESSURE (P1)(P1) (P2) CASE 867E–03 ISSUE D PRESSURE SIDE PORTED (AS, GS) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. STYLE 1: PIN 1. VOUT2. GROUND 3. VCC4. V1 5. V2 6. VEX DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.690 17.53 18.28 B 0.245 0.255 6.22 6.48 C 0.780 0.820 19.81 20.82 D 0.027 0.033 0.69 0.84 E 0.178 0.186 4.52 4.72 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K 0.345 0.375 8.76 9.53 N 0.300 0.310 7.62 7.87 S 0.220 0.240 5.59 6.10 0.720 V 0.182 0.194 4.62 4.93 A 654321 C K N E –B– PORT #1 POSITIVE PRESSURE J –T– S G F D 6 PL PIN 1 MBM0.13 (0.005) T V (P1)
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083 7Motorola Sensor Device Data PACKAGE DIMENSIONS–CONTINUED PRESSURE SIDE PORTED (ASX, GSX) CASE 867F–03 ISSUE D STYLE 1: PIN 1. VOUT2. GROUND 3. VCC4. V1 5. V2 6. VEX NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.080 1.120 27.43 28.45 B 0.740 0.760 18.80 19.30 C 0.630 0.650 16.00 16.51 D 0.027 0.033 0.68 0.84 E 0.160 0.180 4.06 4.57 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K N 0.070 0.080 1.78 2.03 P 0.150 0.160 3.81 4.06 Q 0.150 0.160 3.81 4.06 R 0.440 0.460 11.18 11.68 S 0.695 0.725 17.65 18.42 U 0.840 0.860 21.34 21.84 V 0.182 0.194 4.62 4.93 0.220 0.240 5.59 6.10 C E V J PORT #1 POSITIVE PRESSURE –T– –P– MQM0.25 (0.010) T D F G 6 PL K S PIN 1 U A R B –Q– N SPM0.13 (0.005) Q ST 65 4 3 2 1(P1)
/C0077/C0080/C0088/C0053/C0055/C0048/C0048 /C0083/C0069/C0082/C0073/C0069/C0083
8 Motorola Sensor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET : http://motorola.com/sps MPX5700/D◊