MPX4250GP FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
Differential and Gauge Applications Available 1.4% Maximum Error Over 0 ° to 85°C Patented Silicon Shear Stress Strain Gauge Temperature Compensated Over 40 ° to +125°C Offers Reduction in Weight and Volume Compared to Existing Hybrid Modules Durable Epoxy Unibody Element Typical Applications Ideally Suited for Mi croprocessor or Microcontroller-Based Systems ORDERING INFORMATION(1) 1. The MPX4250D series silicon pressure s ensors are available in the basic element package or with pressure port fittings that provide mounting ease and barbed hose connections. Device Type Case No. MPX Series Order No. Device Marking UNIBODY PACKAGE (MPX4250D SERIES) Basic Element 867 MPX4250D MPX4250D Gauge Ported Element 867B MPX4250GP MPX4250GP Dual Ported Element 867C MPX4250DP MPX4250DP MPX4250D SERIES INTEGRATED PRESSURE SENSOR 0 TO 250 kPA (0 TO 36.3 psi) 0.2 TO 4.9 V OUTPUT UNIBODY PACKAGES PIN NUMBERS(1) 1. Pins 4, 5, and 6 are internal device connections. Do not connect to external circuitry or ground. Pin 1 is noted by the notch in the lead.
1 Vout 4 N/C
2 GND 5 N/C
3 VS 6 N/C
2 Freescale Semiconductor
Figure 1. Fully Integrated Pressure Sensor Schematic Table 1. Maximum Ratings(1)
- Exposure beyond the specified limits may c ause permanent damage or degradation to the device.
Table 2. Operating Characteristics (VS = 5.1 Vdc, TA = 25°C unless otherwise noted, P1 > P2.
- 1.0 kPa (kiloPascal) equals 0.145 psi.
- Device is ratiometric within this specified excitation range.
- Offset (V off) is defined as the output voltage at the minimum rated pressure.
- Full Scale Output (V FSO) is defined as the output voltage at the maximum or full rated pressure.
- Full Scale Span (V FSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
- Accuracy (error budget) consists of the following:
Linearity: Output deviation from a straight line relati onship with pressure over the specified pressure range. and from the minimum or maximum operating temperature points, with zero differential pressure applied. minimum or maximum rated pressure, at 25°C. TcSpan: Output deviation over the temperature range of 0 to 85 °C, relative to 25°C. TcOffset: Output deviation with minimum rated pressu re applied, over the temperature range of 0 to 85°C, relative to 25°C. Variation from Nominal: T he variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.
- Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a
specified step change in pressure.
- Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
- Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
Table 3. Mechanical Characteristics
4 Freescale Semiconductor
Figure 2. Cross Sectional Diagram (not to scale) Figure 3. Recommended Power Supply Decoupling and Output Filtering Figure 4. Output versus Absolute Pressure information regarding media compatibility in your application. of a microprocessor or microcontroller. output will saturate outside of the specified pressure range.
Nominal Transfer Value: Vout = VS x (0.00369 x P + 0.04) ± (Pressure Error x Temp. Factor x 0.00369 x VS) VS = 5.1 ± 0.25 Vdc Transfer Function (MPX4250D) Temp Multiplier 40 3 0 to 85 1 +125 3 Temperature in °C 4.0 3.0 2.0 0.0 1.0 40 20 0 20 40 60 14012010080 Temperature Error Factor NOTE: The Temperature Multiplier is a linear response from 0°C to 40°C and from 85°C to 125°C. Temperature Error Band Pressure (kPa) Pressure Error (Max) Pressure Error Band 0 to 250 kPa ±3.45 kPa 75 100 125 150 175 200 22525 50 250 4.0 3.0 2.0 1.0 1.0 2.0 3.0 4.0 5.0 Pressure Error (kPa) 5.0
6 Freescale Semiconductor
F G N L R 123456
6 PLD
MAM0.136 (0.005) T POSITIVE PRESSURE (P1) C B M J S -A- STYLE 1: PIN 1. VOUT 2. GROUND 3. VCC 4. V1 5. V2 6. VEX STYLE 3: PIN 1. OPEN 2. GROUND 3. +VOUT 4. +VSUPPL Y 5. -VOUT 6. OPEN STYLE 2: PIN 1. OPEN 2. GROUND 3. -VOUT 4. VSUPPL Y 5. +VOUT 6. OPEN MAX MILLIMETERSINCHES 16.00 13.56 5.59 0.84 1.63 0.100 BSC 2.54 BSC 0.40 18.42 30˚ NOM 30˚ NOM 12.57 11.43 DIM A B C D F G J L M N R S MIN 0.595 0.514 0.200 0.027 0.048 0.014 0.695 0.475 0.430 0.090 MAX 0.630 0.534 0.220 0.033 0.064 0.016 0.725 0.495 0.450 0.105 MIN 15.11 13.06 5.08 0.68 1.22 0.36 17.65 12.07 10.92 2.29 2.66 NOTES: DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. CONTROLLING DIMENSION: INCH. DIMENSION -A- IS INCLUSIVE OF THE MOLD STOP RING. MOLD STOP RING NOT TO EXCEED 16.00 (0.630). BASIC ELEMENT (D) CASE 867-08 ISSUE N NOTES: DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. CONTROLLING DIMENSION: INCH.R X 123 456 PORT #2 VACUUM (P2) PORT #1 POSITIVE PRESSURE (P1) PORT #1 POSITIVE PRESSURE (P1) PIN 1 PORT #2 VACUUM (P2) SEATING PLANESEATING PLANE -T- -T- P G C J N B F D 6 PL W V L U S K -Q- -A-MQM0.25 (0.010) T MAM0.13 (0.005) STYLE 1: PIN 1. VOUT 2. GROUND 3. VCC 4. V1 5. V2 6. VEX DIM MIN MAX MIN MAX MILLIMETERSINCHES A 1.145 1.175 29.08 29.85 B 0.685 0.715 17.40 18.16 C 0.405 0.435 10.29 11.05 D 0.027 0.033 0.68 0.84 F 0.048 0.064 1.22 1.63 G 0.100 BSC 2.54 BSC J 0.014 0.016 0.36 0.41 K 0.695 0.725 17.65 18.42 L 0.290 0.300 7.37 7.62 N 0.420 0.440 10.67 11.18 P 0.153 0.159 3.89 4.04 Q 0.153 0.159 3.89 4.04 R 0.063 0.083 1.60 2.11 S U 0.910 BSC 23.11 BSC V 0.182 0.194 4.62 4.93 W 0.310 0.330 7.87 8.38 X 0.248 0.278 6.30 7.06 0.220 0.240 5.59 6.10 PRESSURE AND VACUUM SIDE DUAL PORTED (DP) CASE 867C-05 ISSUE F
PRESSURE SIDE PORTED (GP) CASE 867B-04 ISSUE G
8 Freescale Semiconductor
PRESSURE SIDE PORTED (GP) CASE 867B-04 ISSUE G PAGE 2 OF 2
Rev. 5 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284 +1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center
2 Dai King Street
Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customers technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved.